Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.1 CrAccepted-AOC | ₹13.1 Cr | L1 | Accepted-AOC BEING L1 |
| 2 | L2₹13.2 CrRejected-AOC | ₹13.2 Cr | L2 | Rejected-AOC NOT BEING L1 |
| 3 | L3₹14.7 CrRejected-AOC PLOT NO 178 A MLA COLONY ROAD NO 12 BANJARAHILLS HYDERABAD HYDERABAD TELANGANA 500034 | HYDERABAD | TELANGANA | 500034 | ₹14.7 Cr | L3 | Rejected-AOC NOT BEING L1 |
| 4 | L4₹15.4 CrRejected-AOC | ₹15.4 Cr | L4 | Rejected-AOC NOT BEING L1 |
| 5 | L5₹15.8 CrRejected-AOC WZ 250 B 2 GALI NO 08 SADH NAGAR I PALAM COLONY NEW DELHI 110045 | NEW DELHI | SOUTH WEST DELHI | DELHI | 110045 | ₹15.8 Cr | L5 | Rejected-AOC NOT BEING L1 |
Tender Value
₹13.2 Cr
EMD Value
₹9.9 L
Closing Date
19 Jul 2024, 6:00 pmClosed
Chief Engineer AF Bangalore
Chief Engineer AF Bangalore No. 2 DC Area MES Road Yeshwantpur Post Bangalore 560022
PROVISION OF ADDITIONAL ACCN FOR 100 CADETS AT AFA HYDERABAD
2024_MES_653247_1
801616/E8
Open Tender
Civil Works
540 days
GE (AFA) HYDERABAD
AS PER NIT
8 documents required · 8 mandatory
₹3,000
GE (AFA) Hyderabad
₹9.9 L
Yes
20 Sept 2024
13 May 2024
26 Jul 2024
13 May 2024
19 Jul 2024
5 Jul 2024
14 May 2024 - 24 May 2024
Amount
BOQ Dated
GENERAL SUMMARY NOTE: Schedule ‘A’ Part I to X are prepriced by MES under Ser No. 1 to 10. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.
Lumpsum price worked out by the contractor for “Buildings or Works” as listed in Schedule ‘A’ Part–I
Lumpsum price worked out by the contractor for “Internal Water Supply” as listed in Schedule ‘A’ Part–II
Lumpsum price worked out by the contractor for “Internal Electric Supply" as listed in Schedule ‘A’ Part–III
Lumpsum price worked out by the contractor for “Hardstanding” as listed in Schedule ‘A’ Part – IV.
Lumpsum price worked out by the contractor for "Sewage Disposal" as listed in Schedule ‘A’ Part V .
Lumpsum price worked out by the contractor for “Area Drainage” as listed in Schedule ‘A’ Part – VI.
Lumpsum price worked out by the contractor for “External Water Supply” as listed in Schedule ‘A’ Part – VII.
Lumpsum price worked out by the contractor for “External Electric Supply” as listed in Schedule ‘A’ Part – VIII.
Lumpsum price worked out by the contractor for “Solar Water Heater” as listed in Schedule ‘A’ Part – IX.
Lumpsum price worked out by the contractor for “Special items (AC Points)” as listed in Schedule ‘A’ Part – X.
Sch 'A' Part - XI : BUILDINGS OR WORKS Design and Construction of Single living Accn for 60 senior cadets in 4 storey (G+3 storey) framed construction with permanent specifications in RCC M-25 with PCC Solid block masonry panel walls, ATT, PU based WPT, earthquake resistance as per latest IS etc complete all as specified and as shown on drawings.
Design and Construction of Single living Accn for 40 senior cadets in 4 storey (G+3 storey) framed construction with permanent specifications in RCC M-25 with PCC Solid block masonry panel walls, ATT, PU based WPT, earthquake resistance as per latest IS etc complete all as specified and as shown on drawings.
Sch 'A' Part - XII : Fittings / Fixtures & Misc items. INTERNAL ELECTRIC SUPPLY Supply and fix LED lumininare surface mounted roof light fitting 2feet x 2feet, 36watt, 220V AC with high efficiency PMMA diffuser soft glare free light complete with driver for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and as directed.
Supply and fix LED lumininare surface mounted roof light fitting 1feet x 1feet, 18watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and as directed.
Supply and fix TPN Vertical DB 8 way, protection class IP 43 Double door suitable for incomer MCCB suitable upto 160 Amps and outgoing MCB TPN/SP MCB with Min 200 amps rating bus bar complete all as specified and as directed.
Earthing complete with galvanised iron earth plate electrode of size 600 mm X 600 mm X 6.3 mm thick buried directly under ground vertically to a depth not less than 2.25 meter below ground level with top edge of the plate at a depth not less than 1.5 m below ground level connected to and including GI wire 4 mm dia and GI protection pipe 15 mm dia and light grade connected to and including by means of nuts, bolts check nuts and washers made of copper as shown in Plate No. 3 of SSR Part 1 to the extent applicable to this item including necessary excavation, earth work, PCC 1:3:6 chamber RCC 1:2:4 cover 50 mm thick with 6 mm TMT bar 100 mm center to center watering pipe medium grade 20 mm bore funnel wire mesh etc and testing on completion all as specified and as directed.
Supply and fix 1x36watt sensor based LED light fitting of size 600mm x 600mm surface mounted light with built in PIR (passive infrred) sensor, (automatic motion sensor) CRCA housing 6500K 28000Lm 220-240 volt IP rating : IP 20, glare free homogenous illumination including LED driver with all accessories internally prewired, connecting upto with three core twisted flexible copper conductor complete all as specified and as directed. Model : Philips Cat part No. RC 383B LED 36s - 6500 PSU OD WH PIR or equivalent in approved make.
Supply and fix LED light fitting 20 watt, 220 volts AC twin glow (warm white and cool white) LED up down decorative light (up light 3000K 20 watt @ 2000 lm, down light 6500K @ 2000lm) with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
EXTERNAL WATER SUPPLY Construction of valve chamber of size 900mm x 900mm x 900mm (inner dimension) all as detailed in drawing AFB/TD/056 Sht 1/2 & 2/2, with 100mm thick PCC foundation 1:4:8 type D2, brick masonry built in CM 1:6, 15mm thick internal and external plaster in CM 1:4, external plaster to a depth of 150mm below ground level as also the valve chamber floor, MS sheet cover 3.15mm thick including flat iron framework of FI 40mm x 6mm and 100mm thick PCC coping of 1:2:4, type B1, using 20mm graded aggregate with FI hinge, locking arrangement, handles etc and painting steel surfaces with one coat of red oxide primer and two coats of synthetic enamel black paint complete including necessary excavation in any type of strata and removal of surplus soil to a distance not exceeding 50m, complete all as specified and as directed.
Material and labour for cutting of existing 150mm CI pipe line including all fittings and accessories for taking water supply connection including excavation earth work as required at site complete all as directed.
Supply, Install, testing and commissioning of mono block pump set of capacity 2 HP minimum head 18 Mtrs suitable for electric driven 240 V 50 HZ single phase complete and frame foundation with nut bolts grouting suitable for pump set all as specified and directed.
Supply and fix connect and test DOL starter with steel enclosure, single phase 240 volts, 50 Hz for 2 Hp motor complete all as specified and as directed.
Supply and fix MCCB 4 pole 250 Amp 36 KA with MS 2 mm thick sheet enclosure with door etc duly painted suitable to fix on wall including necessary electrical connection from existing LT panel board. Note- Necessary LT Cable will be measured and paid separately
Supply, Installation, Testing & commissioning of outdoor type panel floor mounted (with bolts and nuts) panel size 0.45mtrX0.30MTRX0.20 Mtr and made out of 3.15 mm thick CRCA MS sheet with front side open able . All door should have neoprene rubber gasket and locking arrangements. The cabinet shall be painted both internally and externally with powder coated paint (shade : RAL 7032 SIEMENS GREY). The cabinet shall be dust and vermin proof with degree of protection IP 54. The cabinet shall be comprising with the following accessories:-
IN COMING (a) Four pole MCCB, 63 Amps with breaking capacity of 16 KA having adjustable thermal and fixed magnetic release. (b) Aluminium bus bars for 3-phase & neutral of current carrying capacity up to 150 Amps dully mounted on FRP/DMC insulators and necessary drilling for connections and duly covered with heat shrinkable PVC sleeves of standard colour code. OUTGOING (a) MCB TPN 40 A 10 KA -01 No (b) Contractor-01 Nos (c) Digital Ammeter, Volt meter-01 Set (d) Timer Switch Supply and fixing LED flood light 120 watts 230V AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection with impact and corrosion resistant complete with driver and lamp all as directed by Engr-in-charge.
Taking down PCC pole of any height including disconnecting all electrical connection and removing from site all as specified and as directed.
Material and labour for solar light fixing assembly made of 4 mtrs long 40 mm bore medium grade GI pipe having a base plate of GI flange top plate made of 8 mm thick MS plate of size 150mm x 150mm duly welded with the pipe including supply and fixing of 4 Nos of 10mm dia X 100mm long anchor bolts with nut and washer for fixing of base flange in the roof top necessary clamps to be fixed on the pipe for fixing of 30 watts solar security light complete all as specified and directed . Note :- 30 watts solar security light, PCC shall be measured and paid separately.
Supply and fix GI pipe bracket light of size 40mm dia 1.20 mtrs length and bend to shape at 120 degree with clamps nut bolts etc, complete all as specified and as directed.
Supply and fix 30W solar street light with, rated life 30000 Hrs solar panel 6V 12 W Polycrystalline, lithium Ferrous 24 AH Battery with all accessories complete all as specified and as directed.
SPECIAL ITEMS Supply and fix 100mm width perforated cable tray, made of 2.0mm Galvanized Steel sheet, duly bended to required shape by sheet bending machine, including cover, made of 1.2mm thick Plain Galvanized Steel sheet duly screwed with the cable tray and duly fixed on the wall / ceilings including suitable Galvanized Steel brackets or hanging from the ceiling with suitable suspender as required at site all as specified and as directed
SOLAR WATER HEATER Supply, Install, testing and commissioning of Solar water heating system with (Flat Plate Collector) based on indirect transfer of heat exchanger type capacity of 500 litres, with electrical heating back up of 2 KW the hot water tank insulated with 100 mm thick Rock Wool of density 48Kg/CUM the insulation fixed on outside the tank using chicken wire mesh and vapour barrier. On top of the insulation, aluminium cladding with 26 SWG aluminium sheet shall be provided with weather proof joints to prevent any seepage of water/water vapour all as specified and as directed.
SVS PROJECTS (BID ID -3058779)
SRICO PROJECTS PVT LTD (BID ID -3067683)
C R R CONSTRUCTIONS (BID ID -3059047)
imran construction company (BID ID -3059155)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid