IITR/EME-17(12)/2024

Amount

Electrical Renovation Work

Wiring for light point/ fan point/ exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC inslated copper conductor single core cable etc. as required. Group C

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 2.5 sq. mm

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 4.0 sq. mm

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Installation, Testing, Commissioning of wall bracket/ ceiling fitting of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connection etc. as required

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep

Extra for fixing the louvers/ shutter complete with frame for a exhaust fan of all sizes .

Supplying and drawing of UTP 4pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 125A, 36 KA,FPMCCB

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar,din bar for mounting MCBs (but without MCBs and incomer ) as required . 4 way (4 + 12), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

Supply and Fixing DP Sheet enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.

Earthing with G.I earth plate 600mm x 600 mm x6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories and providing masonry enclouser with cover plate having locking arrangement and watering pipe of 2.7 mtr long etc with charcoal and salt as required. (For Natural Earthing)

Providing, Laying & Connection 25mm x 5mm Copper strip, with brass nut bolt and washer etc in existing G.I Pipe from earth electrode in ground, as required.

Supplying and laying 25mm x 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I nut, bolt, spring, washer etc., as required. (Jointing shall be done by overlapping and with 2 sets of G.I nut bolt & spring washer spaced at 50mm)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including exacation, sand cushioning, protective covering and refilling the trench etc as required. Above 35 sq. mm and upto 95 sq. mm

Supplying and fixing cable route marker with 10 cm x 10 cm x 5 mm thick G.I plate with inspection there on, bolted / welded to 35 mm x 35 mm x 6 mm angle iton, 60 cm long and fixing the same in ground as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 31/2 x50 sq.mm (35mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 31/2 x70 sq.mm (38mm)

SITC of 2 Ton Inverter Split Air Conditioner 5 star rating along with wall bracket for mounting of Outdoor Unit and standard fixing accessories including PVC Flexible pipe upto 3m length of 15mm dia,complete as required.

SITC of 1.5 Ton Inverter Split Air Conditioner 5 star rating along with wall bracket for mounting of Outdoor Unit and standard fixing accessories including PVC Flexible pipe upto 3m length of 15mm dia, complete as required.

Supply of Ceiling fan 1200 mm 3 Blade complete as required.

Supply of 36Watt surface type LED 2X2 Panel light complete as required.

Supply & Fixing of 400mm Wall Fan High Speed. complete as required

Supply of Heavy duty industrial type exhaust fan 300 mm sweep 1400 RPM with lower shutter complete as required.

Supply of 70 Sqmm X 4 Core Aluminium Armoured XLPE Power cable of grade 1.1KV complete as required

Supply and Fixing 100x50mm uPVC Trunking. complete as required

Supply and Fixing 50mm Divider. complete as required

Supply, Fixing Internal angle 100x50mm. complete as required.

Supply, Fixing End cap 100x50mm., complete as required.

Supply, Fixing joint cover 100x50mm. complete as required.

Supply & Fixing of PVC mounting Box 3 Module complete as required.

Supply and Fixing of RJ45 Internet socket complete as required.

Supply and Fixing of RJ11 Telephone Jack complete as required.

Supply & Fixing of PVC 1Mod.front plate. SCW complete as required.

Supply & Fixing of PVC 3Mod.front plate. SCW complete as required.

Supply & Fixing of 16A One way Swicth complete as required.

Supply & Fixing of 6/16A Socket ISI Mark complete as required.

Supply and Fixing of 6A Switch complete as required.

Supply & Fixing of 6A Socket ISI Mark complete as required.

Shifting of Existing LT cubical Panel along with following accessories as below:- (A) Incomer (i) MCCB 315 Amp 4Pole -01 No (B) Outgoing (i) MCCB 100 Amp 4 Pole -03 No (ii) SP MCB 63 Amp -06 No (iii) SP MCB 32 Amp - 06 No Complete as required.

Proper dismantling and reinstallation of NFC make digital EPABX System complete with all accessories complete as required.

Bajrang Electric Works

New Singh Trading Corporation

Sieger Electrical System Pvt. Ltd.

Ankur Enterprises

Bajrang Electric Works

New Singh Trading Corporation

Sieger Electrical System Pvt. Ltd.

Ankur Enterprises