Renovation works of Bus Terminus, Rangat. SW - Providing EEI.

Amount

Wiring for light/fan point/exhaust fan point/call bell point with 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit with piano type switch, phenolic laminated sheet, suitable size M.S box and earthing the point with 1.5 Sqmm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for circuit/ submain wiring alongwith earth with wire the following sizes of FR PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 x 4 Sqmm + 1 x 4 sqmm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required

2 x 1.5 sq. mm

Supplying and fixing 3 pin, 5 amp. ceiling rose on the existing junction box/ wooden block including connection etc as required

Installation, testing and commisioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on celling/ wall, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

Upto 450mm

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

6 way , Double door (for Street Light control)

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 'C' curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as reqd.

Single pole and neutral

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

Upto 35 sq. mm

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required

Above 4.5 metre and upto 6.5 metre

Above 6.5 metre and upto 8.0 metre

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required

50 mm dia

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required

63 mm dia (OD-63 mm & ID-51 mm nominal)

Providing and fixing of 2 way single pole and neutral, sheet steel, MCB enclosure, 240 V on surface complete , interconnections, powder painted including earthing etc. as required.

Repainting of existing G.I Street Light pole ( 8 Mtr approx.) with synthetic enamel paint with one coat of approved quality as pert the direction of EIC.

Supplying of Surface mounted LED Batten Luminaires with Lamp type 20W LED 6000K, Make;- Havells, E-LITE LED PRIDE PLUS or its equivalent as approved by Engineer - in - Charge.

Supplying & fixing of LED 100 W Street Light made up of pressure die cast aluminium housing with high power LED with toughened glass top cover having IP66 protection on existing pole Make: Havells, Model PEARL MAGNUM, Cat No. ENDURAPEARLMAGNUMSL100WLED757PASYTOTGAST or its equivalent as approved by Engineer - in Charge i/c connections etc. as required.

Supplying & fixing of LED 50 W Flood Light made up of innovative die cast aluminium IP66 suitable for highlighting Make: Havells, Model JETA QUANTO PLUS, Cat No. JETAQUANTOPLUSUSFLP50WLED757SYMLENS or its equivalent as approved by Engineer - in Charge i/c connections etc. as required.

Supplying and fixing of LED 50W Post Top Light suitable for pole dia 76mm with IP65 protection of Make: Havells, Model : RUBY (CEAR) - IP65 Cat No.RUBYMAXIPT50WLED757PSYMTOPC or its equivalent as approved by Engineer- in- charge i/c connections etc. as required.

Fabrication and Supplying of Post top Light Pole made out of 65mm dia "B" Class ISI marked GI Pipe of 4 mtrs long with 300mm x 300mm x 6mm thick MS Base Plate welded at the bottom of the pole, fixing of SMC box of Size 200 x 140 x 95mm, 4 way connector & 6 Amps MCB with clamping arrangement for SMC Box i/c painting with one coat of Red oxide Zinc chromate primer and two coats of synthetic enamel paint as required as per direction of Engineer - in - Charge.

Fabrication, Supplying & fixing of Gate Light Pole made out of 65mm dia "B" Class ISI marked GI Pipe of 0.20 mtrs long ,300mm x 300mm x 6mm thick MS Base Plate welded at the bottom of the pole & fix the pole on top of the gate column by nut & bolt , fixing of SMC box of Size 200 x 140 x 95mm, 4 way connector & 6 Amps MCB with clamping arrangement for SMC Box i/c painting with one coat of mettalic primer and two coats of synthetic enamel paint as required as per direction of Engineer - in - Charge.

Supplying & fixing of SMC box of Size 230 x 170 x 105mm (Outer dia), 4 way connector & 6 Amps MCB with clamping arrangement etc. as required as per direction of Engineer - in - Charge.

Suppying, Installation Testing and Commissioning of L.T out door feeder box of minimum size 0.60 Mx 0.60 M x 0.4 M with 4 legs made out of MS angle and GI plate having both side opening and locking arrangement and compartment to house the following accessories i,e.2 way MCB DB single pole i/c single pole and neutral MCB -6A, 3 Nos. porcelain fuse carrier and base i/c making foundation and plateform of size 0.60 M x 0.60 M of 0.3M thickness, inter earthing, painting of 1 coat of primer and 2 coats of finishing paints with interconnection setc. as required. (For Garden Lights)

Supplying of following size ISI marked PVC insulated and PVC sheathed/ XLPE (heavy duty) Armoured 1.1 KV grade Aluminium conductor cable conforming to IS:7098 (Part - I )1988.

3 core x 10 sqmm

Supplying of Heavy duty Exhaust fan 300mm sweep, 1400RPM suitable for operation on 230V, single phase, 50 Hz Make: Havells Model - Turbo Force SP or equivalent as approved by EIC.

SARAVANA TRADING COMPANY

M/s Sai Electrical Works