Strengthening and maintenance of 440V OH line by changing of damaged poles, muffing, stay fixing and fixing and fencing of transformer at AADOCM, Dhori Area.

Amount

Part-A

Erection of steel tubular or rail pole strut in cement concrete1:3:6 (1cement: 3 coarse sand: 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling and secured with holding clamps, bolts , nuts, etc. as required

Providing and making steel pole collar with cement concrete (1cement:3 coarse sand: 6 stone aggregate 20mm) of specified size and shape including form work, plastering if required, curing etc as required. (volume of pole/pipe not to be deducted)

Supplying and erection of stay set complete (galvanised) with19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45cmX45cmX7.5mm, thimble, stay clamps, turn buckle (20mmX60cm), 7/4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete1:3:6(1cement:3 coarse sand: graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Supplying and erection of 75 mmX90mms hackle insulator with G.I. Bolt, nuts and straps etc. as required .

Supplying and erection of 100 mmX80mm pin insulator complete with G.I. Spindle and nuts etc. as required .

Erection o ACSR conductor of 7/2.11mm to 7/3.00mm diameter including binding etc. as required.

Erection of G.I. Wire No. 8 SWG including binding etc. as required.

Erection of cradle guard as required.

Dismantling of pole/street light standard/strut embedded in brick ballast foundation etc. as required.

Dismantling of over headlines comprising of copper/ aluminium overhead conductor, Cl. wire, cross arms, insulators etc. as required.

Part B

Providing of MCCB 800A

Fixing of MCCB 800A @ 10% of S.no. 1

Fabrication and making of MCCB 800A distribution box

Providing of copper lugs 400A

Fixing of copper lugs 400A @ 10% of S.no.1.16

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode

Structural steel work riveted, bolted or welded in built up sections ,trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25 x25 mm made of G.I. wire of dia 3mm including strength ending with 2mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.

Providing and laying cement concerete in retaining walls return walls including attached pilasters, columns, piers, abutments, pillars,posts, struts, buttresses, string or lacing couses , paraperts , coping bedlocks, anchor blocks, plain window sills, fillets , sukens floor etc upto five level, excluding the cost of centring shutting and finishing 1:3:6(1 cement: 3 coarse sand (zone-iii)derived from natural sources : 6 graded stone aggregate 20mm nominal size derived from natural sources.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4(1cement:2coarsesand(zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying in position cement concrete of specified grade of reinforced cement concrete, excluding the cost of centering and shuttering - All work up to plinth level 1:2:4(1cement:2coarsesand(zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size

Painting with synthetic enamel paint approved brand andmanufacture of required color to give an even shade two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Total impact of GST for the purpose of CTC

M/S KUMAR ENTERPRISES (BID ID -1166531)

M/S SHIV PARBATI ENTERPRISES (BID ID -1166536)