Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.9 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹12.5 L+₹2.3 L (22.3%)Rejected-Finance | L2 | Rejected-Finance High bid value | |
| 3 | Rejected-Technical | - | Rejected-Technical Due to category b (i) not enlisted. | |
| 4 | Rejected-Technical | - | Rejected-Technical Due to category b (i) not enlisted. |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
16 Jan 2020, 6:00 pmClosed
GARRISON ENGINEER SILCHAR
GE SILCHAR, PO-ARUNACHAL, DIST-CACHAR, ASSAM-788025
REPAIR TO INTERNAL WIRING AND REPAIR / REPLACEMENT OF FITTINGS / FIXTURES IN SINGLE OFFRS ACCN AT LAILLAPUR AND VAIRENGTE MIL STN UNDER GE SILCHAR
2019_MES_307537_1
8504/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
VAIRENGTE
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE SILCHAR
₹20,000
Yes
1 Feb 2020
18 Dec 2019
17 Jan 2020
19 Dec 2019
16 Jan 2020
2 Jan 2020
Amount
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as directed.
Dismantling old unserviceable main switches DBs, MCB enclosures, electrical meter, PVC rectangular blocks etc and keeping safe custody either for reuse or for disposal incuding making good to the disturbed surface of wall all as directed.
M&L for point wiring with single core PVC insulated cable of size 1.5Sqmm nominal area with multi-stranded copper conductor, 1100V grad drawn through and including PVC nonmetatllic concealed conduit of suitable dia with all fitting and accessories including MS terminal box of suitable size for mounting switches/sockets etc of sutable size including 1.5Sqmm PVC insulated unsheathed single core copper conductor eart continuity wire connected to common earth dolly for the following complete all as specified.
One light point controlled by one way switch 5 Amps
One fan point/exhaust fan point controlled by one way switch 5 Amps and regulator
One bell point controlled by one way switch 5 Amps
All as per item No. 3 but for one 3 pin socket outlet point, 5 Amps control by one switch on independent board complete all as specified.
All as per item No. 3 but for one 3 pin socket outlet point, 5 Amps control by one switch on same board with other switches complete all as specified.
All as per item No. 3 but for one 5 pin , 15 Amps socket point control by one switch on independent board with 2.5 Sqmm size PVC insulated unsheathed multi-stranded copper conductor cable with 2.5 sqmm PVC insulated unsheathed single core copper conductor earth wire wire complete all as specified.
M&L for point wiring with single core PVC insulated cable of size 1.5Sqmm nominal area with multi-stranded copper conductor, 1100V grad drawn through and including PVC suface casing caping double lock type to be fixed with the help of rawl plugs and screws including necessary fitting and fixtures, terminal box and PVC board hylem sheet, marking good to disturbed surface to match with existing surface complete all as specified.
One light point controlled by one way switch 5 Amps
One fan point/exhaust fan point controlled by one way switch 5 Amps and regulator
One bell point controlled by one way switch 5 Amps
All as per item No. 7 but for one 3 pin socket outlet point, 5 Amps control by one switch on independent board complete all as specified.
All as per item No. 7 but for one 3 pin socket outlet point, 5 Amps control by one switch on same board with other switches complete all as specified.
All as per item No. 7 here in before but for one 5 pin, 15 Amps socket point control by one switch on independent board with 2.5 Sqmm size PVC insulated unsheathed multi-stranded copper conductor cable with 2.5 sqmm PVC insulated unsheathed single core copper conductor earth wire wire complete all as specified.
S & F switch piano 5 Amps single pole, Flush type one way 230 V complete all as specified.
S & F switch piano 15 Amps single pole, Flush type one way 230 V complete all as specified.
S & F Modular switch one way 6 Amps, 1 module, single pole one way complete all as specified.
S & F Modular switch one way 16 Amps, 1 module, single pole one way complete all as specified.
S & F Socket outlet 2 in 1, 5 Pin, 5 Amps flush type complete all as specified.
Supply & Fix Switch socket combination, 3 pin, 5 Amp flush type universal complete all as specified.
Supply & Fix Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified.
S & F Modular type Socket outlet 6A/16A - 2/3 pin combined 2 module complete all as specified.
S & F Bell push, flush type, 5 amp. AC 230V complete all as specified.
S & F Modular Bell push 6A, 1 module AC 230V complete all as specified.
S & F call Bell, AC, 230 volts, single pole complete all as specified.
S & F Angular Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified.
Taking down carefully submain wiring of any type and size including all accessories without disturbing existing wiring fitting fixtures etc and making good to disturbed surface complete all as specified and directed.
M & L for circuit /submain wiring along with earth wire 2 x 4.0Sqmm PVC insulated unsheathed cable multi-stranded copper conductore drawn through and including PVC casing capping of suitable size with all fitting and fixture accessories on roof, wall, celling etc, including 1 x 4.0 Sqmm PVC insulated unsheathed single core multi copper conductor earth wire complete all as specified. Note: Two run of single core cable and one run of earth wire will be mearsured as one length.
M & L for circuit /submain wiring along with earth wire 2 x 6.0Sqmm PVC insulated unsheathed cable multi-stranded copper conductore drawn through and including PVC casing capping of suitable size with all fitting and fixture accessories on roof, wall, celling etc, including 1 x 6.0 Sqmm PVC insulated unsheathed single core multi copper conductor earth wire complete all as specified. Note: Two run of single core cable and one run of earth wire will be mearsured as one length
M & L for circuit /submain wiring alongwith earth wire 2 x 4.0Sqmm PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including PVC non metallic concealed conduit of suitable dia with all fitting and accessories and MS terminal box of sutable size with all fitting and accessories on roof, wall, celling etc, including 1 x 4.0 Sqmm PVC insulated unsheathed single core multi copper conductor earth wire complete all as specified. Note: Two run of single core cable and one run of earth wire will be mearsured as one length.
M & L for circuit /submain wiring alongwith earth wire 2 x 6.0Sqmm PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including PVC non metallic concealed conduit of suitable dia with all fitting and accessories and MS terminal box of sutable size with all fitting and accessories on roof, wall, celling etc, including 1 x 6.0 Sqmm PVC insulated unsheathed single core multi copper conductor earth wire complete all as specified. Note: Two run of single core cable and one run of earth wire will be mearsured as one length.
S & F Ceiling rose, 3 phase surface bekelite/ PVC 63 5x25mm polycarbonate, isolated body three terminal complete all as specified.
S & F distribution board double door made out CRCA and mild steel sheet surface with insulated material like polyester or with epoxy phosphatised, power painted, surface/ flush mounting TPN 4 way, 415 V with bus bar rating 200A and vermin proof, neutral links, earth bar and din rail blanking plantes, double door suitable for incorporation of MCB's and isolators etc complete all as specified.
S & F MCB TPN 63 Amps, 240 V 10KA breaking capacity complete all as specified.
S & F sheet metal enclosure for MCBs distridution board, 240V, 8 way single pole and neutral including 200Amps rated busbar, neutral link din rail double door for breaking capacity 10KA complete all as specified.
All as per item No. 31 here-in-before but 4 way SPN
All as per item No. 31 here-in-before but 2 way SPN without bus bar
S & F MCB SPN 40 Amps, 240 V , 10KA breaking capacity complete all as specified.
S & F MCB SPN 6-32 Amps, 240 V , 10KA breaking capacity complete all as specified.
S & F MCB SP 6-32 Amps, 240 V , 10KA breaking capacity complete all as specified.
S & F stepped type electronic fan regulator flush type (ISI Mark) complete all as specified.
S & F modular fan ragulator step 120W - 2 Module
S & F Modular starter switch for air conditiner 2 module, 20 Amps complete all as specified.
S & F sheet metal enclosed for DB, double pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB of 10 Amps, 240V complete all as specified.
S & F Modular white cover plate with frame 3 module complete all as specified.
All as per item No. 41 above but 4 module
All as per item No. 41 above but 5 module
All as per item No. 41 above but 6 module
S & F of Modular Metal Flush box 3 Module complete all as specified.
All as per item No. 45 above but 4 module
All as per item No. 45 above but 5 module
All as per item No. 45 above but 6 module
Taking Down electrical water heater(geyser) of any capacity from exiting system disconnect inlet and outlet water connection for leakage/non-heating complaints, and repair to geyser by changing heating element and repair to water inner tank by mean of brazing/ welding etc to arrest the leak and refixing the inner tank in outer shell with proper filling of glass wool as heat resistance material in suitable quantity and refixing the geyser at the original location complete all as specified and directed.
S & F LED linear light fitting 4 ft x 20 Watt basic all purpose surface and wall mounting LED batten with polycarbonate housing and integrated electric drive and connecting with 3 core flexible copper PVC insulated of Size 20mm etc complete all as specified and directed.
S & F Pluto panel (surface) 34 watt Aesheically designed 2x2 LED flat surface in white finish mounting which provides soft light and glare free symmetrical illumination, recess/ surface mounted aesthetically designed for soft light & glare including accessories internally pre-wired suitable for surface ceiling/ recessed mounting type includng making connections with the existing supply complete all as specified.
Taking down Ceiling fan of any size/sweep for replacing bearing, bush or for rewinding after disconnecting the wire from existing ceiling rose and refixing the same after rewinding, cleaning dust, oiling greasing, servicing and replacing bearing, gun metal bush, rubber reel with clam and nut-bolt, washer, lock pin, excellation gear sytem, boby painting etc as existing including connecting flexible 3 core cable frim ceiling rose to connector of fan complete all as specified and directed.
S & F in repair plastic body exhust fan, AC single phase, 240 Volt of size 200mm sweep with heavy duty plastic body with louvers connecting up including provision of fixing clamp, nut bolt and cable from ceiling rose or connector to fan, including taking down old UNSV plastic body exhaust fan complete all as specified and directed.
S & F Pluto panel (surface) Aesheically designed luminaire pluto size 1x1, 15 watt of edge-lit illumination, recess/surface mounted aesthetically designed for soft light & glare including accessories internally pre-wired suitable for surface ceiling/ recessed mounting type includng making connections with the existing supply complete all as specified.
S & F endure rugby NEO- IP65 enviromental friendly ultra morden energy saving surface mounted ovel shape 10 watt bulk head edge-lit LED luminaire comprising og high bright less LED fittings complete all as specified.
S & F LED building Security light fitting 20 Watt housing made out of die cast aluminium alloy with toughed glass, IP 66 protection having clamp for mountig on wall woring on 240 V AC 50 Hz 20Watt including fixing on wall with 02 Nos MS clamps and bracket made of 40 mm Dia light grade GI Pipe bend to shape complete all as specified.
Material and labour for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr below gound level) with top edge of the plate not less than 1.5 mtr below ground level connected to earth lead wire 4mm dia protected by 15 mm bore light grade galvanised iron pipe and other end connected to test point as directed including funnel with wire mesh and watering pipe 20 mm bore medium grade galvanised iron pipe with charcol and common salt in alternate layers of 15 cm thickness all around the GI plate electrode with concrete pit in PCC 1:3:6 type C-1 with cast iron frame including cast iron cover 10mm thick hinged to CI frame and 6mm MS rod for handle, necessay excavation and earth work in hard/dense soil and disposal of spoil to a distance n exc 50 m and necessary testing complete all as shown in electrical plate No 3 SSR part-1 all as specified.
S & F Service cable aluminium conductor PVC insulated and PVC sheathed weather proof heavy duty of size 2 core 10 sq mm all as specified.
S & F Service cable aluminium conductor PVC insulated and PVC sheathed weather proof heavy duty of size 2 core 6 sq mm all as specified.
S & F Service cable aluminium conductor PVC insulated and PVC sheathed weather proof heavy duty of size 2 core 4 sq mm all as specified.
m/s builders and suppliers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .