REPAIR/REPLACEMENT OF EXTERNAL PLASTERING SHAHABAD STONE TILES PCC FENCING AND DRAINS IN OTM AND MD ACCN OF MES COLONY D3 E3 AND CERTAIN BLDGS IN ZONE A AREA AT NDA KHADAKWASLA

Amount

Dismantling stone slab of any description or thickness in floors, approns etc

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for

Dismantling of floor hearth or wall tiling including cement mortal bedding ( but not backing) removing serviceable tiles to store and rubbish off the premisses

S&F for glossy finished chequered cement concrete tiles 30cmx30cmx30mm thick set jointed with grey cement and pigment and pointed in neat cement slurry including 20 mm thick screed bed of CM(1:6) in floors

M&L for 60 mm thick glossy finished cement concrete coloured interlocking pavers, pattern as approved, as in floors or pavements, laid on 30 mm thick stone dust cusioning, laid dry to the profile as directed incl filetting to the edges in CM (1:4), all manufacturer's instruction complete all as directed

M&L for 30 mm to 25 mm thick rough dressed sahabad stone slab flooring bedded and jointed in cement mortar (1:6) and pointed in CM (1:3)

Ditto all as per Item Ser No 06 above but except sahabad stone

M&L for PCC (1:3:6) type C2 as in plinth protection finish surface even and smooth using extra cement (75 mm thick) incl forming dummy joints at 2 mtr centre to centre and filled with lean mortar (1:8) complete all as directed

M&L for PCC(1:2:4) type B-1 (20 mm graded stone aggregate) 40mm thick as in floor with even and smooth finishing without using extra cement complete.

M&L for PCC (1:4:8) type D-2 (Using 40mm graded stone aggregates) as in sub base 75 mm thick

Demolition of Precast cement concrete block/stone boulder walling built in CM or Cement lime Mortar.

M&L for precast cement concrete block masonry exc 10 cm width with solid block type C1 (1:3:6) (Using 20 graded stone aggregate) Grade and setting in cement mortar (1:6) complete all as specified and as directed

M&L for rendering 15mm thick cement plaster in CM( 1:4) on block/stone walling surface finished complete all as specified .

M&L for dubbing out average 15mm thick on irregular face of walls (when specificially ordered in writing) in CM (1:4)

M&L for precast cement concrete type B1 (1:2:4) 20 mm graded stone aggregate as in kerb stones , win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, columns, posts,pier caps, boundary pillars, bed plates, pintle blocks,anchorage blocks, bonders (for stone walling) corbles, brackets etc., (of any section indicate), with plain fair faces is, weatherings, throating etc, and setting in CM (1:4) complete with joints to match complete all as specified and directed.

Taking down cement plaster of any description incl racking out joints hacking for key and scrubbing down with water to remove dust etc complete all as specified.

M&L for cement concrete (1:2:4) type B-1 (Using 20 mm graded stone aggregates as in coping,surface channels and drains complete all as specified and directed

M&L for preparation of newly plastered/concrete wall surface and applying two coats of cement base paint.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc (Inner girth only measured)

M&L for raking or cutting out joints and decayed mortor etc ,washing the joints and keeping the surface to be pointed wet for 02 days prior to re-pointing in random rubble or polygonal rubble uncoursed or brought up to courses work built in cement mortor etc upto three storyed bldg or 20m height complete all as directed.

M&L for keyed pointing to random or polygonal rubble, uncoursed or brought upto courses in CM (1:4) upto and including height 20m complete all as directed. Note : Rates all as included for scafollding, shuttering, ladder etc

Dismantling fencing wiremesh/barbed wire any type.

Dismantling posts or struts (steel or RCC) embedded in concrete, any section, including taking out embedded portion and making good the disturbed surface.

M&L for cement concrete type C-2, (1:3:6) (Using 40 mm graded stone aggregate) as in foundation, coping, filling and mass concrete complete all as specified and directed

Supply, fabricate and fixing in position angle iron posts for fencing posts and struts, split at bottom, cut to shape, including providing flat iron for securing wire mesh with necessary welding, drilling bolting or rivetting, complete all as specified and directed.(Steel confirming to Fe-290 (Gde E-165)).

Fixing only in position angle iron posts for fencing posts and struts, split at bottom, cut to shape, including providing flat iron for securing wire mesh with necessary welding, drilling bolting or rivetting, complete all as specified and directed.

Supply only of MS Galvanised chain link fencing, 3 mm nominal dia of wire, avg area of apperture 0.25 sqcm and/or weight of the fencing not less than 2.00 kg/sqm complete all as specified and diretced.

Fixing only MS galvanised chain link fencing, including line wires any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire.

M&L for 10 mm and above dia MS round bars cut to length bend to shape required etc (to be used for stiffness to chain link) fixed indepdently to the angle iron post complete all as directed by Engineer-In-Charge. (Conforming to Fe- 410w (Gde E-250) quality 'A' or Fe 290 (Gde E-125).

S&F MS screw bolts (machine made 12 mm dia. Shank) with hexagonal or square heads at one end and screwed at another end, each screwed end to be fitted with washer and one hexagonal or square nut, exc. 5cm n. exc 10 cm in length.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 including removing old structure complete all as specified and directed.

Ditto all as per Item Ser No 31 above but for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts etc

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M&L for two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel/iron surface of any description over 10 cm in width or girth

M&L for preparation of new untreated concrete surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as speicifed and directed.

M&L for two coats of synthetic enamel paint over a coat of Red oxide primer including preparation of new steel/iron surface of any description but n.exc 10 cm in width or girth

AVS CONSTRUCTION

G V HAGAWANE

Prem Singh

M/S P D TUPE