Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.0 LAccepted-AOC MES COLONY KUMBHIGRAM AIRPORT CACHAR ASSAM 788109 | KUMBHIGRAM | CACHAR | ASSAM | 788109 | ₹38.0 L Quoted ₹39.0 L | L1 | Accepted-AOC L1 bidder |
| 2 | L2₹39.9 LRejected-Finance 01 CHANGSARI KAMRUP ASSAM 781101 | KAMRUP | ASSAM | 781101 | ₹39.9 L | L2 | Rejected-Finance Other than L1 bidder |
| 3 | L3₹42.2 LRejected-Finance OIL INDIA LTD GATE NO 02 PO UDAYAN VIHAR GUWAHATI ASSAM | KAMRUP METRO | ASSAM | 781001 | ₹42.2 L | L3 | Rejected-Finance Other than L1 bidder |
| 4 | L4₹43.9 LRejected-Finance OPP BSF GATE NO 3 AZARA GUWAHATI 17 ASSAM | ₹43.9 L | L4 | Rejected-Finance Other than L1 bidder |
| 5 | L5₹44.4 LRejected-Finance HOUSE NO 11 BYE LANE 1 EAST PUB SARANI SANKAR DEB PATH CHANDMARI DIST KAMRUP METRO ASSAM 781003 | GUWAHATI | KAMRUP METRO | ASSAM | 781003 | ₹44.4 L | L5 | Rejected-Finance Other than L1 bidder |
| Sl No | Description | Qty | Unit | M/s Dhani Enterprise L4 | DEEP CONSTRUCTION L7 | A K ENTERPRISE L2 | VISHWAKARMA ELECTRICAL L6 | SHANKAR ENTERPRISE L8 | M L TREATMENTS L5 | S. R. TRADING L3 | Goswami Traders L1 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply only High strength Calcium based granular chlorination chemical as per IS: 10500: 2012 for treated and disinfectant water of following specifications for Water treatment in sealed packing of 45 Kgs HDPE Jars to MES store yard as directed by Engr-in- Charge. Make : Altoch GP/Rayalseema/Aquafit or as approved by E-In-Cs Br /Zonal CEs.:
(a) Chemical analysis & physical observations:
(i) Description: Whitish granules
(ii) Granular size (Mesh passing through - 100 BSS): 1.1 (± 0.1) %
(iii) Water / moisture: 5.00 (± 0.2) %
(iv) Other insoluble Calcium salts: 1.1 (± 0.1) %
(v) Mercury & other Heavy Metal contaminants: BDL
(vi) The chlorination chemical must contain appropriate quantities of dispersants / corrosion inhibitors to prevent encrustation / scaling in distribution systems.
(b) Strength in terms of quantity of chlorination chemical required to obtain free chlorine of 1 ppm per lakh liters of water requirement must be 140 - 160 gm per one lakh liter of water to achieve 1 ppm Av. Cl. at injection point ( contains not less than 60 to 70% active chlorine ).
(c) Stability: Projected shelf life of chlorination chemical must be one year with minimal loss of chlorine.
(d) Handling of chlorination chemical for regular chlorination:
(i) Operational considerations: Must be safe to use in terms of level of insoluble components. There must be no risks relating to encrustations in equipment and pipelines, no sludge generation, no hard water scaling in supply water.
(ii) Operator health considerations: Chlorination chemical must contains acceptable levels of granular size to avoid risks to operators from health safety point of view. | 900 | Kgs | 310 ₹2.8 L | 316 ₹2.8 L | 220 ₹2.0 L | 380 ₹3.4 L | 350 ₹3.1 L | 315 ₹2.8 L | 392.5 ₹3.5 L | 276 ₹2.5 L |
| 2.00Notes for item No. 1 : (i) Supply shall be made by the contractor based on the reuirement / piecemeal manner as directed by the AGE E/M and shall be delivered in the store yard of AGE E/M. No claim whatsoever on account of extra charges of transportation shall be entertained by the Deptt. (ii) Contractor shall provide the original purchase vouchers alongwith test certificate of entire quantity of each lot at the time of delivery. (iii) Testing of every lot of High strength Calcium based granular & Bleaching powder shall be got carried out by the contractor from NABL accreded lab at his own cost and report shall be submitted to Engr-in-Charge. (iv) Material shall be brought by the contractor in packed plastic containers/baggs as per OEM packing in sealed position. (v) The brand and make of the chlorination chemical must be recommended and certified by All India Institute of Hygiene & Public Health (Govt. of India), confirming compliance to all the above specifications with a declaration from the laboratory that from the technical, strength, stability, health, safety, and operational point of view, as well as the fact that this product is used for drinking water applications for consumption by humans, the brand and make of Calcium based granular chlorination chemical, bleachig powder & Ferric Alum are suitable for drinking water chlorination and are recommended for use. | |||||||||||
| 3.00 | Material and labour for disconnecting of monoblock pump set and motor of capacity up 0.5HP to 1HP, burnout winding wire, servicing and repairing/ replacement of impeller, shafts, shafts keys, bushes, fan blade, replacement of burnout winding wire with new winding wire of same gauge, cotton tape, varnish, ball bearing, bushes, gland packing, rubber gasket, capacitor, nuts & bolts complete and refixing the same on MS base frame on place and connecting to MS/GI piping line testing and commissioning all as specified and directed. Note: Rates for opening, transportation to workshop & back after necessary repairing works required such as welding, grinding and chamfering be included in the items rates. | 4 | Each Job | 2,147 ₹8,588 | 2,189 ₹8,756 | 1,500 ₹6,000 | 2,124.9 ₹8,499.60 | 2,065 ₹8,260 | 2,182 ₹8,728 | 2,022 ₹8,088 | 1,908 ₹7,632 |
| 4.00 | Material and labour for disconnecting of monoblock pump set and motor of capacity 2 HP, burnout winding wire, servicing and repairing/ replacement of impeller, shafts, shafts keys, bushes, fan blade, replacement of burnout winding wire with new winding wire of same gauge, cotton tape, varnish, ball bearing, bushes, gland packing, rubber gasket, capacitor, nuts & bolts complete and refixing the same on MS base frame on place and connecting to MS/GI piping line testing and commissioning all as specified and directed. Note: Rates for opening, transportation to workshop & back after necessary repairing works required such as welding, grinding and chamfering be included in the items rates. | 2 | Each Job | 3,339 ₹6,678 | 3,405 ₹6,810 | 2,000 ₹4,000 | 3,305.7 ₹6,611.40 | 3,512 ₹7,024 | 3,394 ₹6,788 | 4,153.5 ₹8,307 | 2,968 ₹5,936 |
| 5.00 | Taking out centrifugal electric 5 HP Motor 3 phase, 440 Volt from the exisitng foundation, transport to workshop for rewinding by using super enamelled copper winding wire of existing wire gauge incl other allied items such as varnish tape, sleeve, greasing, beaaring, bushes etc of suitable size for following capacity of motor includeecessary repairing of rotor shafts if required and refixing after testing and commissioning complete all as specified and directed. Note- All T&P required shall be supplied by contractor without extra cost. | 2 | Each Job | 10,016 ₹20,032 | 10,214 ₹20,428 | 7,000 ₹14,000 | 9,915.3 ₹19,830.60 | 10,000 ₹20,000 | 10,180 ₹20,360 | 9,555.6 ₹19,111.20 | 8,904 ₹17,808 |
| 6.00 | Taking out centrifugal electric 7.5 HP Motor 3 phase, 440 Volt from the exisitng foundation, transport to workshop for rewinding by using super enamelled copper winding wire of existing wire gauge incl other allied items such as varnish tape, sleeve, greasing, beaaring, bushes etc of suitable size for following capacity of motor includeecessary repairing of rotor shafts if required and refixing after testing and commissioning complete all as specified and directed . Note- All T&P required shall be supplied by contractor without extra cost. | 2 | Each Job | 12,520 ₹25,040 | 12,768 ₹25,536 | 8,500 ₹17,000 | 12,393.9 ₹24,787.80 | 12,800 ₹25,600 | 12,724 ₹25,448 | 11,787 ₹23,574 | 11,130 ₹22,260 |
| 7.00 | Taking out centrifugal electric 10 HP Motor 3 phase, 440 Volt from the exisitng foundation, transport to workshop for rewinding by using super enamelled copper winding wire of existing wire gauge incl other allied items such as varnish tape, sleeve, greasing, beaaring, bushes etc of suitable size for following capacity of motor includeecessary repairing of rotor shafts if required and refixing after testing and commissioning complete all as specified and directed . Note- All T&P required shall be supplied by contractor without extra cost. | 1 | Each Job | 21,940 ₹21,940 | 22,374 ₹22,374 | 15,000 ₹15,000 | 21,719.7 ₹21,719.70 | 22,121 ₹22,121 | 22,299 ₹22,299 | 20,655 ₹20,655 | 19,504 ₹19,504 |
| 8.00 | Taking out centrifugal electric 25 HP Motor 3 phase, 440 Volt from the exisitng foundation, transport to workshop for rewinding by using super enamelled copper winding wire of existing wire gauge incl other allied items such as varnish tape, sleeve, greasing, beaaring, bushes etc of suitable size for following capacity of motor includeecessary repairing of rotor shafts if required and refixing after testing and commissioning complete all as specified and directed . Note- All T&P required shall be supplied by contractor without extra cost. | 2 | Each Job | 31,002 ₹62,004 | 31,615 ₹63,230 | 22,000 ₹44,000 | 30,689.1 ₹61,378.20 | 35,050 ₹70,100 | 31,507 ₹63,014 | 29,186 ₹58,372 | 27,560 ₹55,120 |
| 9.00 | Taking out centrifugal electric 40 HP Motor 3 phase, 440 Volt from the exisitng foundation, transport to workshop for rewinding by using super enamelled copper winding wire of existing wire gauge incl other allied items such as varnish tape, sleeve, greasing, beaaring, bushes etc of suitable size for following capacity of motor includeecessary repairing of rotor shafts if required and refixing after testing and commissioning complete all as specified and directed . Note- All T&P required shall be supplied by contractor without extra cost. | 1 | Each Job | 45,311 ₹45,311 | 46,208 ₹46,208 | 40,000 ₹40,000 | 44,855.1 ₹44,855.10 | 46,058 ₹46,058 | 46,051 ₹46,051 | 42,657 ₹42,657 | 40,280 ₹40,280 |
| 10.00 | Taking out centrifugal electric 50 HP Motor 3 phase, 440 Volt from the exisitng foundation, transport to workshop for rewinding by using super enamelled copper winding wire of existing wire gauge incl other allied items such as varnish tape, sleeve, greasing, beaaring, bushes etc of suitable size for following capacity of motor includeecessary repairing of rotor shafts if required and refixing after testing and commissioning complete all as specified and directed . Note- All T&P required shall be supplied by contractor without extra cost. | 1 | Each Job | 52,465 ₹52,465 | 53,503 ₹53,503 | 40,000 ₹40,000 | 51,937.2 ₹51,937.20 | 56,049 ₹56,049 | 53,322 ₹53,322 | 49,392 ₹49,392 | 46,640 ₹46,640 |
Tender Value
₹41 L
EMD Value
₹82,000
Closing Date
29 Dec 2025, 6:00 pmClosed
GE Narangi
GE Narangi C/o 99 APO
REPAIR MAINTENANCE OF PUMP STARTERS ACTUATED VALVES PANELS BOARDS AND CONNECTED WORKS UNDER GE NARANGI
2025_MES_743791_1
8150/B/E8
Open Tender
Civil Works
180 days
Guwahati
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Narangi
₹82,000
Yes
11 Mar 2026
9 Dec 2025
31 Dec 2025
9 Dec 2025
29 Dec 2025
22 Dec 2025
Amount
Supply only High strength Calcium based granular chlorination chemical as per IS: 10500: 2012 for treated and disinfectant water of following specifications for Water treatment in sealed packing of 45 Kgs HDPE Jars to MES store yard as directed by Engr-in- Charge. Make : Altoch GP/Rayalseema/Aquafit or as approved by E-In-Cs Br /Zonal CEs.: (a) Chemical analysis & physical observations: (i) Description: Whitish granules (ii) Granular size (Mesh passing through - 100 BSS): 1.1 (± 0.1) % (iii) Water / moisture: 5.00 (± 0.2) % (iv) Other insoluble Calcium salts: 1.1 (± 0.1) % (v) Mercury & other Heavy Metal contaminants: BDL (vi) The chlorination chemical must contain appropriate quantities of dispersants / corrosion inhibitors to prevent encrustation / scaling in distribution systems. (b) Strength in terms of quantity of chlorination chemical required to obtain free chlorine of 1 ppm per lakh liters of water requirement must be 140 - 160 gm per one lakh liter of water to achieve 1 ppm Av. Cl. at injection point ( contains not less than 60 to 70% active chlorine ). (c) Stability: Projected shelf life of chlorination chemical must be one year with minimal loss of chlorine. (d) Handling of chlorination chemical for regular chlorination: (i) Operational considerations: Must be safe to use in terms of level of insoluble components. There must be no risks relating to encrustations in equipment and pipelines, no sludge generation, no hard water scaling in supply water. (ii) Operator health considerations: Chlorination chemical must contains acceptable levels of granular size to avoid risks to operators from health safety point of view.
Notes for item No. 1 : (i) Supply shall be made by the contractor based on the reuirement / piecemeal manner as directed by the AGE E/M and shall be delivered in the store yard of AGE E/M. No claim whatsoever on account of extra charges of transportation shall be entertained by the Deptt. (ii) Contractor shall provide the original purchase vouchers alongwith test certificate of entire quantity of each lot at the time of delivery. (iii) Testing of every lot of High strength Calcium based granular & Bleaching powder shall be got carried out by the contractor from NABL accreded lab at his own cost and report shall be submitted to Engr-in-Charge. (iv) Material shall be brought by the contractor in packed plastic containers/baggs as per OEM packing in sealed position. (v) The brand and make of the chlorination chemical must be recommended and certified by All India Institute of Hygiene & Public Health (Govt. of India), confirming compliance to all the above specifications with a declaration from the laboratory that from the technical, strength, stability, health, safety, and operational point of view, as well as the fact that this product is used for drinking water applications for consumption by humans, the brand and make of Calcium based granular chlorination chemical, bleachig powder & Ferric Alum are suitable for drinking water chlorination and are recommended for use.
Material and labour for disconnecting of monoblock pump set and motor of capacity up 0.5HP to 1HP, burnout winding wire, servicing and repairing/ replacement of impeller, shafts, shafts keys, bushes, fan blade, replacement of burnout winding wire with new winding wire of same gauge, cotton tape, varnish, ball bearing, bushes, gland packing, rubber gasket, capacitor, nuts & bolts complete and refixing the same on MS base frame on place and connecting to MS/GI piping line testing and commissioning all as specified and directed. Note: Rates for opening, transportation to workshop & back after necessary repairing works required such as welding, grinding and chamfering be included in the items rates.
Material and labour for disconnecting of monoblock pump set and motor of capacity 2 HP, burnout winding wire, servicing and repairing/ replacement of impeller, shafts, shafts keys, bushes, fan blade, replacement of burnout winding wire with new winding wire of same gauge, cotton tape, varnish, ball bearing, bushes, gland packing, rubber gasket, capacitor, nuts & bolts complete and refixing the same on MS base frame on place and connecting to MS/GI piping line testing and commissioning all as specified and directed. Note: Rates for opening, transportation to workshop & back after necessary repairing works required such as welding, grinding and chamfering be included in the items rates.
Taking out centrifugal electric 5 HP Motor 3 phase, 440 Volt from the exisitng foundation, transport to workshop for rewinding by using super enamelled copper winding wire of existing wire gauge incl other allied items such as varnish tape, sleeve, greasing, beaaring, bushes etc of suitable size for following capacity of motor includeecessary repairing of rotor shafts if required and refixing after testing and commissioning complete all as specified and directed. Note- All T&P required shall be supplied by contractor without extra cost.
Taking out centrifugal electric 7.5 HP Motor 3 phase, 440 Volt from the exisitng foundation, transport to workshop for rewinding by using super enamelled copper winding wire of existing wire gauge incl other allied items such as varnish tape, sleeve, greasing, beaaring, bushes etc of suitable size for following capacity of motor includeecessary repairing of rotor shafts if required and refixing after testing and commissioning complete all as specified and directed . Note- All T&P required shall be supplied by contractor without extra cost.
Taking out centrifugal electric 10 HP Motor 3 phase, 440 Volt from the exisitng foundation, transport to workshop for rewinding by using super enamelled copper winding wire of existing wire gauge incl other allied items such as varnish tape, sleeve, greasing, beaaring, bushes etc of suitable size for following capacity of motor includeecessary repairing of rotor shafts if required and refixing after testing and commissioning complete all as specified and directed . Note- All T&P required shall be supplied by contractor without extra cost.
Taking out centrifugal electric 25 HP Motor 3 phase, 440 Volt from the exisitng foundation, transport to workshop for rewinding by using super enamelled copper winding wire of existing wire gauge incl other allied items such as varnish tape, sleeve, greasing, beaaring, bushes etc of suitable size for following capacity of motor includeecessary repairing of rotor shafts if required and refixing after testing and commissioning complete all as specified and directed . Note- All T&P required shall be supplied by contractor without extra cost.
Taking out centrifugal electric 40 HP Motor 3 phase, 440 Volt from the exisitng foundation, transport to workshop for rewinding by using super enamelled copper winding wire of existing wire gauge incl other allied items such as varnish tape, sleeve, greasing, beaaring, bushes etc of suitable size for following capacity of motor includeecessary repairing of rotor shafts if required and refixing after testing and commissioning complete all as specified and directed . Note- All T&P required shall be supplied by contractor without extra cost.
Taking out centrifugal electric 50 HP Motor 3 phase, 440 Volt from the exisitng foundation, transport to workshop for rewinding by using super enamelled copper winding wire of existing wire gauge incl other allied items such as varnish tape, sleeve, greasing, beaaring, bushes etc of suitable size for following capacity of motor includeecessary repairing of rotor shafts if required and refixing after testing and commissioning complete all as specified and directed . Note- All T&P required shall be supplied by contractor without extra cost.
Taking out centrifugal electric 100 HP Motor 3 phase, 440 Volt from the exisitng foundation, transport to workshop for rewinding by using super enamelled copper winding wire of existing wire gauge incl other allied items such as varnish tape, sleeve, greasing, beaaring, bushes etc of suitable size for following capacity of motor includeecessary repairing of rotor shafts if required and refixing after testing and commissioning complete all as specified and directed . Note- All T&P required shall be supplied by contractor without extra cost.
Dismantling the Monoblock centrifugal Pump assembly any type or make for carrying out repair and replacement of worn out parts by strip opening of all parts such as impellers, pump shafts, lock collers, bearing/ bushes, gland rings , nuts & bolts etc and machine work such as welding turning, re-facing where required and replacing of defective parts up to pump capacity of 100 HP.
Dismantling the Monoblock centrifugal Pump assembly any type or make for carrying out repair and replacement of worn out parts by strip opening of all parts such as impellers, pump shafts, lock collers, bearing/ bushes, gland rings , nuts & bolts etc and machine work such as welding turning, re-facing where required and replacing of defective parts up to pump capacity of 50 HP.
Dismantling the Monoblock centrifugal Pump assembly any type or make for carrying out repair and replacement of worn out parts by strip opening of all parts such as impellers, pump shafts, lock collers, bearing/ bushes, gland rings , nuts & bolts etc and machine work such as welding turning, re-facing where required and replacing of defective parts up to pump capacity of 40 HP.
Dismantling the Monoblock centrifugal Pump assembly any type or make for carrying out repair and replacement of worn out parts by strip opening of all parts such as impellers, pump shafts, lock collers, bearing/ bushes, gland rings , nuts & bolts etc and machine work such as welding turning, re-facing where required and replacing of defective parts up to pump capacity of 15 to 25 HP.
Supply and fix rubber Insertion Sheet flange of thickness 4mm where required as per site requdirement, including cutting and making holes of sutable size complete all as specified and directed.
Supply and fix rubber coupling suitable for up to 25 HP motor including CI outer coupling and nuts & bolts including machining work for making shaft size complete all as specified and directed
Supply and fix rubber coupling suitable for 40 HP to 100 HP motor including CI outer coupling and nuts & bolts including machining work for making shaft size complete all as specified and directed
Supply and fix Star coupling including CI nuts and bolts suitable up to 15 HP Motors complete all as specified and directed.
Taking down existing old Non returning valve and supply and fix new NRV of size 150mm dia for suction complete all as specified and directed.
Taking down existing old Non returning valve and supply and fix new NRV of size 100mm dia for suction complete all as specified and directed.
Taking down existing old Stainer Valve and supply and fix new Stainer Valve of size 150mm dia for suction complete all as specified and directed include replacement of rubber sheet and nuts and bolts.
Taking down existing old Stainer Valve and supply and fix new Stainer Valve of size 200mm dia for suction complete all as specified and directed include replacement of rubber sheet and nuts and bolts.
Taking down existing old Stainer Valve and supply and fix new Stainer Valve of size 100mm dia for suction complete all as specified and directed include replacement of rubber sheet and nuts and bolts.
Repairing of existing starter/panel by disconnecting existing burn out cable/ wiring complete and replaced with 1.5 Sqmm single core copper conductor or suitable size as per existing cable include replacement of Digital Volt meter, Digital Amp Meter alongwith CTs, relays, making connection, replacement of cable lugs of suitable size, repair/replacement of locking arrangement include painting with two coat of synthetic enamel paint complete all as specified and directed. Note : Repalcement of contractor, relay, MCCBs will be measured and paid seperately.
Material and labour for MCB SP LT 230 volt 50 Hz, C Series AC 16-32 Amps 16 KA with thermal magnetic release for OL and SC protection complete all as specified and directed.
Material and labour for MCB TPN LT 415 volt 50 Hz, C Series AC 16-32 Amps 16 KA with thermal magnetic release for OL and SC protection complete all as specified and directed.
Material and labour for MCB TPN LT 415 volt 50 Hz, C Series AC 40-63 Amps 16 KA with thermal magnetic release for OL and SC protection complete all as specified and directed.
Material and labour for MCCB TP NL LT 415 volt 50 Hz, AC 63 amps 25 KA with thermal magnetic release for OL & SC protection complete all as specified and directed.
Material and labour for MCCB TP NL LT 415 volt 50 Hz, AC 125 amps 25 KA with thermal magnetic release for OL & SC protection complete all as specified and directed.
Material and labour for MCCB TP NL LT 415 volt 50 Hz, AC 630 amps 50 KA with thermal magnetic release for OL & SC protection complete all as specified and directed.
Material and labour MCCB TP NL LT 415 volt 50 Hz, AC 250 amps 25 KA with thermal magnetic release for OL & SC protection complete all as specified and directed.
Supply only Thermal Over load relay of rating 10- 40 Amps, 415 Volts, complete all as specified and directed
Supply only Thermal Over load relay of rating 20- 63 Amps, 415 Volts, complete all as specified and directed.
Material and labour for replacement of watering pipe of 1 mtr length 8mm dia PVC threaded pipe both end nuts as per sample.
Supply and fix submersible flat cable of size 6 Sqmm 3 core 1100 volt grade copper conductor conforming to IS 694/1990 with latest ammendments from starter to motor complete all as specified and directed.
Supply and fix Submersible flat cable of size 10 Sqmm 3 core 1100 volt grade copper conductor conforming to IS 694/1990 with latest ammendments from starter to motor.complete all as specified and directed.
Supply and fix in repair single core cable with copper conductor PVC round sheathed (flexible) industrial cable of size 16 Sqmm 1100 volt grade copper conductor conforming to IS 694/1990 with latest ammendments from starter to motor. complete all as specified and directed.
Supply and fix in repair single core cable with copper conductor PVC round sheathed (flexible) industrial cable of size 10 Sqmm 1100 volt grade copper conductor conforming to IS 694/1990 with latest ammendments from starter to motor. complete all as specified and directed.
All as per as item No 111, but 160 KVA
All as per as item No 111, but 100 KVA
Supply and fix in repair Water Level Controller PCB-5 Level. Voltage - 5 V DC Make:- SPLASH/RDS/ICS
Supply and fix in repair Water Level Controller PCB-10 Level. Voltage - 5 V DC Make:- SPLASH/RDS/ICS
Supply and fix in repair Solenoid Valve 10mm/15mm/25mm 230 VAC. Direct acting/Pilot Operated complete all as specified and directed . Make: ROTEX/AVCON/JOHNSON CONTROLS/ DANFOSS
Supply and fix in repair Coil for Solenoid Valve 10mm/20mm 230 V AC.complete all as specified and directed .
Supply and fix in repair electronic Pressure switch 0-10 Kg/sqcm , as existing 230V, 50Hz complete all as specified and directed
Supply and fix in repair Electric motor type Synchronous, Input Voltage - 230 V AC, suitable for actuator of size 100 mm dia. complete all as specified and directed .
Supply and fix in repair Electric motor type Synchronous, Input Voltage - 230 V AC, suitable for actuator of size 150 mm dia complete all as specified and directed
Supply and fix in repair Electric motor type Synchronous, Input Voltage - 230 V AC, suitable for actuator of size 200 mm dia complete all as specified and directed .
Supply and fix Electric motor type Synchronous, Input Voltage - 230 V AC, suitable for actuator of size 300 mm dia complete all as specified and directed .
Supply and fix MS spiral gear for gear box or actuator for Butterfly valve of size 100/150/200/250/300 mm dia complete all as specified and directed .
Supply and fix MS sector gear for gear box or actuator for Butterfly valve of size 100/150/200/250/ 300 mm dia complete all as specified and directed .
Supply and fix Butterfly valve for rating 10 kg/sqcm, Disc material, CI with nylon coating, operating angle - 90 degrees of size 100 mm dia complete all as specified and directed .
Supply and fix Butterfly valve for rating 10 kg/sqcm, Disc material, CI with nylon coating, operating angle - 90 degrees of size 150 mm dia complete all as specified and directed .
Supply and fix Butterfly valve for rating 10 kg/sqcm, Disc material, CI with nylon coating, operating angle - 90 degrees of size 200 mm dia complete all as specified and directed .
Supply and fix Butterfly valve for rating 10 kg/sqcm, Disc material, CI with nylon coating, operating angle - 90 degrees of size 250 mm dia complete all as specified and directed .
Supply and fix Motorized actuator without motor suitable for 150 mm/200mm dia size Butterfly valve, Protection - IP 65 with Space Heater, Local Position Indicator, Adjustable mechanical stoppers complete all as specified and directed .
Supply and fix Motorized actuator without motor suitable for 250/300 mm dia size Butterfly valve, Protection - IP 65 with Space Heater, Local Position Indicator, Adjustable mechanical stoppers. complete all as specified and directed .
Supply and fix Capacitor for Actuator suitable for 50/80/100/150/200/250/300 mm dia Butterfly Valve of capacity 3.5 Mfd/6 Mfd/8 Mfd complete all as specified and directed .
Supply and fix Resistor(R C Circuit) for Actuator suitable for 50/80/100/150/200/250/300 mm dia Butterfly Valve with capacity 470 Ohms, 100 Watt/235 Ohms, 200 W/100 Ohms complete all as specified and directed .
Supply and fix Limit switch for Actuator suitable for 100/150/200/250/300 mm dia Butterfly Valve complete all as specified and directed .
Supply and fix SMPS input 230 V/AC, Output 24V DC, rating 5 Amp complete all as specified and directed .
Supply and fix joint kit complete all as specified and directed .
Supply only Inorganic polymerised liquid primary coagulant for drinking water tretment with the following specifications:- (a) Appreance : Clear to slight hazy liquid (b) Odour : odourless (c) Specific gravity : 1.3300-1.3500, (d) pH (30%) : 4.00-4.40 (e) Evaporation rate : 50-75% (Water) (f) Viscosity< 50cps complete all as specified and directed .
Supply only aluminum sulphate (Alum ferric) grade II superior quality suitable for treatment of drinking water in the form of solid lumps of 20 kgs. Complete all as specified and as directed.
Checking of Dosing Pump regurlarly basis for a period of six months installed at different locations for entire period of completion for smooth fucntioning of plants, find out defect and rectify the defect immediately when found in plants all specified as directed for complete contract period. Dosing pump will be any make & model as existing complete Note :- (i) Spare parts shall be ,easured and paid for separately. (ii) In case, payment shall be made in part period, rate shall be worked out on proportional basis
Supply and fix as in repairs 20mm dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches with all fittings fixed to walls complete all as specified and directed .
Taking down / up unserviceable XLPE LT cable of size up to 400 Sqmm 3-1/2 core complete all as specified and directed. (Note: Earth work to be measured and paid under relavent item of this schedule)
Supply, laying and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade corss-sectional area 400 Sq mm 3.5core complete all as specified and directed. (Note: Excavation & Thimbles to be measured and paid under relavent items of this schedule)
Supply and fixing in repair water tight IP-66 swimming pool LED water proof light fittings Metal body LED light fittings 15W, 12V DC complete having CE certification include making connection with water proof wire alongwith driver as existing complete all as specified and directed.
A K ENTERPRISE (BID ID -3510942)
S. R. TRADING (BID ID -3510965)
M/s Dhani Enterprise (BID ID -3510528)
M L TREATMENTS (BID ID -3510800)
VISHWAKARMA ELECTRICAL (BID ID -3510547)
DEEP CONSTRUCTION (BID ID -3510854)
SHANKAR ENTERPRISE (BID ID -3510735)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.42 MB
8150Tender.pdf
Tender Documents • 0.86 MB
BOQ_832842.xls
BOQ • 1.98 MB
Download all tender documents and submit your bid