Work of issuing connections as per application under Full Deposit Scheme (Nivesh Mitra/Jhatpat Portal) in the jurisdiction of Electricity Distribution Division, Muradnagar.

Carriage of line material (like LT ABC, 11KV XLPE Cable, ABC and 11KV Cable Jointing Kit indoor/outdoor type etc.) from Electricity Store Center, Modinagar to site of work with loading and unloading at both ends on Kachha Packka road. where each consumer’s material shall be considered as 01 job.

Carriage of ST Pole/Pcc Pole 11 mtrs. Long from Electricity store center, Modinagar/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road.

Carriage of PCC Pole 8.5 mtrs. Long from Electricity store center, Modinagar/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road.

Carriage of 10KVA to 250KVA from Electricity store center, Modinagar to site of work with loading and unloading at both ends on Kachha Packka road.

Carriage of 11KV CT/PT Unit from Electricity store center, Modinagar to site of work with loading and unloading at both ends on Kachha Packka road.

Carriage of Metering Cubical Set Complete, from Electricity store center, Modinagar to site of work with loading and unloading at both ends on Kachha Packka road.

Carriage of 33/11 KV Cable XLPE.

Erection & Fixing of PCC Pole 8.5 mtr long in LT. line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing L.T. Pin Clamps, M.S. Flat of size 50x6 & Schacle Insulator of size 75x90mm, with proper size nuts and bolts.

Erection & Fixing of STP/PCC Pole 11 mtr. long in 11 KV line after digging of suitable pits including fixing of requisite accessories as per RESPO Drawing/Norms by providing F-Bracket made of M.S. Flat of size 50x6 mm, Cross Arm holding Clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts.

Fabrication, erection and fixing of double pole on ST Pole/P.C.C pole 11 mtr. long with fixing of M.S. Top & Dropper Channel, M.S. S/S Angle, E-Bracket, 11 KV Pin insulator with Pin, Disc Insulator with Disc fitting as per RESPO Drawing/Norms by providing top and dropper clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts.

Mounting, Placing and connecting from LT/HT side of 11KV, 10 to 250KVA T/F as per RESPO Norms.

Mounting, Placing and connecting from LT/HT side of 11KV, CT/PT Units as per RESPO Norms.

Laying of 140/160mm O/D PN-4PE-80 PN-4 grade UV stabilized HDPE pipe as per IS of 6meter, for laying of underground Cable as per RESPO/Norms, including cost of above HDPE pipe.

Laying of 11 KV and 33KV XLPE Cable undergound (50x2=100 Double Circuit) into HDPE Pipe, spare cable shall be left in the loop shape at both ends as per RESPO/Norms.

Road restoration charge for pucca road crossing as per RESPO/Drawing Norms.

Laying of 11KV XLPE Cable 3x35/70/120/185sqmm and completion work properly, overhead as per RESPO/Norms.

Laying of LT ABC of various capacity and completion work properly, as per RESPO/Norms.

Erection & Fixing of Distribution Box on pole by provding 02 Nos. D/B Clamps & proper size nut & bolts.

Providing and fixing of Suspension Clamp with Eye Hook as per RESPO/Norms.

Providing and fixing of Dead End Clamp with Eye Hook, as per RESPO/Norms.

Making and filling of 11KV Cable Jointing Kit, Indoor/outdoor type, after duly plumbing and taping of suitable XLPE Cable, providing, fixing and crimping of proper size good quality lugs, including cost of lugs and tape etc., as per RESPO Norms.

Installation of 11KV Metering Cubical Complete work as per RESPO Norms.

Fabrication & Fixing of T-Channel on pole by providing Holding Clamps, F-Clamps & Proper size nuts & bolts, as per RESPO/Norms.

Grouting & fixing of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast as per drg. Including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing as per RESPO Drawing/Norms by providing all grouting material and stay clamp made of M.S. Flat of size 50x6mm with proper size bolts & nuts & loops.

Earthing of supports with MS earth Rod of (20x2500)mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connection below the earth electrodes with the help of G.I. wire & earthing lugs as per RESPO Drawing/Norms by providing proper size nuts & bolts.

Grouting of ST/PCC supports in CC 1:4:8 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials.

Wrapping of barbed wire on 11KV ST/PCC poles as anti-climbing device for a length of 0.9mtrs. Wire pitch/gap 13mm and fixing upper and lower end keeping lower end at a hieght of 2.75 mtr from the ground complete, including providing & fixing of lower end & upper end clamps made of M.S. Flat 40X5mm complete with nuts & bolts and all other required material and T&P.

Fabrication of Guarding Angle X Arm & other requisites material for guarding by drawing 02Nos G.I Wire and making loop at suitable distance as per RESPO drawing/Norms by providing holding clamps, 02Nos. Eye bolts made of M.S. round size 12mm dia-100mm long & Cross Arm clamps made of M.S. Flat of size 50X6mm and bolts as per norms of RESPO Lucknow .

Laying , Stringing and final sagging of ACSR Weasel Conductor after binding from Insulator, as per RESPO/Drawing Norms.

Laying , Stringing and final sagging of ACSR Rabbit Conductor after binding from Insulator, as per RESPO/Drawing Norms.

Laying , Stringing and final sagging of ACSR Dog Conductor after binding from Insulator, as per RESPO/Drawing Norms.

Providing & Fixing of G.I. pipe 6"dia Class-B over 11KV 3X70 and 3x120Sq.mm XLPE cable before mounting the cable at double pole. The work includes fitting of clamps, sealing of top and bottom of pipe and one end of pipe is to be burried under earth about 500mm earch including mounting and clamping the cable on double pole structure and making connection with overhead line at both ends.

Construction of T/F plinth suitable for 250KVA T/F (size of 2 x 2 x 1.5 mt.) as per drawing, cc work in foundation in ratio 1:4:8 (Cement, Sand & Brick ballast). Ist class brick work in side walls cc ratio of 1:4 (cement & fine sand). 12mm thick plaster in ratio 1:4 (cement & fine sand). The RCC work on top of plinth in ratio 1:2:4 after duly filling of brick ballast inside the plinth & ramming the same, including cost of all material & labour.

Erection & Fixing of 11KV. Fuse set on ST Pole 11mtr long, by providing all required materials, including cost of 11KV Fuse set.

Erection & Fixing of 11KV. TPMO set on ST Pole 11mtr long, by providing all required materials, including cost of 11KV TPMO Set.

Providing fixing and fabrication of fencing (MS 5mp 5x6mm fencing, 6 feet hight including civil welt 2x4x3) around the T/F plinth upto 6 fit height on top of T/F plinth, including cost of all material and labour as per RESPO/drawing/Norms.

Providing & Fixing of Danger Board, including fixing of all accessories by providing all required materials (like suitable clamps, nuts & bolts etc.) as per RESPO/Drawing Norms.

Providing & Fixing of Number Plate alongwith all required accessories (like suitable clamps, nuts & bolts etc.) as per RESPO/Drawing Norms.

Dismantling & Removal of old existing STP/PCC pole after digging of pit and opening of all accessories.

Dismantling & Removal of old Existing Meter Cubical/CT PT

Removal of old & used ACSR Conductor and opening form insulator and bundling of the same.

Dismantling & Removal of old & used 25/63KVA T/F and opening of all accessories.

Carriage of old & used STP/PCC from site of work to store center with loading and unloading at both ends.

Removal of old & used ACSR Conductor and opening form insulator and bundling of the same.

Carriage of old & used 25/63/100 KVA T/F from site of work to store center with loading and unloading at both ends.

Carriage of old & used Metereing Cubical/CT PT from site of work to electricity store centre/je store. With loading & unloading both side kaccha pakka Road.

Earthing of neutral & body of T/F By Boring and lowering of G.I. Pipe size 32 mm dia… into the ground up to water level 120 fit. With the lower end of solid copper cone approx. 225mm long and 750 gm. in weight shall be provided and screwed in pipe as well as bringing out a continuous copper wire 6 SWG from the cone up to the ground surface where it will be bolted to the M.S. earth strip for T/F neutral connection, the earth strip will be welded to the G.I. pipe and neutral earthing support.

Providing & Fixing Chemical earthing of Transformers Equipment the ground surface where it will be bolted to the M.S. earth strip for connection the earth strip will be welded to the earthing and neutral support, as per RESPO/Norms.

Jumpering work shall be carried out properly as per RESPO norms. The work shall be measured in number of jobs, where each consumer’s material shall be treated as one complete job, irrespective of the quantity of material involved.

Please Enable Macros to View BoQ information