Airconditioning work

Supply & Delivery of minimum 10.55KW nominal cooling capacity 3 TR celling suspended non -inverter / inverter (To be approved By EIC) concealed type Split Air Conditioner having EER not less than 3.49 and CFM not less than 1500, at ISI condition suitable for operation on 415V .. 5% - 50 Hz. - 3Ph AC supply Rated Air FLow not less than 2,580 m³/hr with precharged R-410A/R-32 refrigerant, Inbuilt Drain-Pump for easy drainage and max refrigerant piping length supported upto 30 Mtrs., Wired/ Wireless remote & all other accessories, The Condensing Unit should be capable for outside ambient 52˚C. Each unit consist of two nos scroll compressor. (Machine Make- O-General ARG36FUAN OR ARGA36BLWA-B/AOGA36BLWA-B / Mitsubishi Electric / Mitsubishi Heavy / Daikin - Make and model to be approved By EIC)

Supply & Delivery of minimum 7.1KW nominal cooling capacity 2 TR celling suspended non -inverter / inverter (To be approved By EIC) concealed type Split Air Conditioner having EER not less than 3.43 and CFM not less than 1000, at ISI condition suitable for operation on 415V / 230V .. 5% - 50 Hz. - 3Ph/1Ph AC supply. Rated Air FLow not less than 1400 m³/hr with precharged R-410A/R-32 refrigerant, Inbuilt Drain-Pump for easy drainage and max refrigerant piping length supported upto 25 Mtrs., Wired/ Wireless remote & all other accessories, The Condensing Unit should be capable for outside ambient 52˚C.Each unit consist of two nos scroll compressor (Machine Make- O-General ARG25FUAN/AOG25 OR ARGA25BLWA-B/AOGA25BLWA-B /Mitsubishi Electric / Mitsubishi Heavy / Daikin - Make and model to be approved By EIC

Supply & Delivery of minimum 5.28 KW nominal cooling capacity 1.5 TR celling suspended non -inverter / inverter (To be approved By EIC) concealed type Split Air Conditioner having EER not less than 3.57 and CFM not less than 618, at ISI condition suitable for operation on 415V / 230V .. 5% - 50 Hz. - 3Ph/1Ph AC supply. Rated Air Flow not less than 1030 m³/hr with precharged R-410A/R-32 refrigerant, Inbuilt Drain-Pump for easy drainage and max refrigerant piping length supported upto 20 Mtrs., Wired/ Wireless remote & all other accessories, The Condensing Unit should be capable for outside ambient 52˚C. Each unit consist of two nos scroll compressor. (Machine Make- O-General ARG25FUAN/AOG25 OR ARGA18BLWA-B/AOGA18BLWA-B / Mitsubishi Electric / Mitsubishi Heavy / Daikin - Make and model to be approved By EIC

Installation testing & commissioning of above 3/2/1.5 Ton AC machines by fixing the indoor with L shaped 50x50x6mm MS angle structure of required size approved by EIC, duly fixed to the wall by fastener and nut bolts etc and also edge of the structure to be fixed from the ceilling with 12mm full threaded suspender bolt with double nut & spring washer and painting of the entire structure complete as directed by the EIC.

Supply and Erection of M.S. Grill Guard made by 20 mm x 5 mm M.S. Flat duly flat welded and fabricated by 6" gap in the side 25 x 25 x 5 mm M.S. angle four side and made base stucture support by 75x40x8mm U Channel grouting in wall with cantilever support of 65x65x6 mm ms angle by the instruction of E.I.C. and of the grill side duly welded by Co's own tools & tackles, hing 2-Palla door in upper and lower portion incl S&F of 7 lever Godrej Lock & Key and cutting by gas cutter including S&F of MS wire Net (8 SWG ) with 1"x1" gap to be fixed on grill guard incl painting the holl structure after preparation by two coat of synthetic enamel paint over one coat of R.O. Primer as per direction of the E.I.C. [Size - 48'-6" (L) x 4' (D) x 4' (H) ]

Dismantling all the existing old AC machines with outdoor unit and other accessories like copper pipe, wires, etc after disconnection and mending good the damages to original finish and also stacking the usable materials in store as per direction of EIC.

Supply, installation & commissioning Copper Refrigeration pipe line for liquid (1/4" OD SD mini 1.15 mm thick) line with 9 mm thick nilrlle rubber insulation supports & brackets (Make : Mandev/Ryoku/Nippon)

Supply, Installation & commissioning Copper Refrigeration pipe line for suction (1/2" OD HD mini.1.15 mm thick) line with 9mm thick Nltrile rubber Insulation,supports & brackets (Make : Mandev/Ryoku/Nippon)

S&L of 1.1 KV grade 7 core 2.5 Sq.mm unarmoured copper power Cable from IDU to ODU (Make:- Havells/ Gloster/Polycab) through PVC pipe on wall by suitable saddle as per direction.

S&L of 1.1 KV Grade 3 core 2.5 Sq.mm unarmoured copper communication Cable from IDU to ODU (Make:- Havells/Gloster/Polycab) on wall by suitable saddle as per direction.