COMPREHENSIVE REPAIR/ REPLACEMENT OF MISC B/R WORKS ALONGWITH CERTAIN ALLIED WORKS IN BDE HQ AND OTHER UNITS UNDER AGE (I) AYODHYA CANTT.

Amount

S&F powder coated anodised aluminium snap grid 600x600mm frame work with hanger 6mm dia GI (upto 1200mm length) ajusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold and for false ceiling and S&F 4mm thick high pressure steam cured Non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws including dismantling complete all as specified and as directed.

S&F 5mm thick PVC Wall lining wood grain printed PVC Sheet inclusive of solvent cement and fixing at site on PVC frame/fillet of 5 mm thick including dismantling complete all as specified and directed.

S&F in repair 4mm thick high pressure steam cured Non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa of 150 gsm as in roof covering/cladding to wall and rain water gutter fixed with self tapping screws, including dismantling complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa of 150 gsm as in roof covering/cladding to wall , fixed with self tapping screws, including dismantling complete all as specified and directed.

Dismantling of framed work timber scantling 40 sqcm and over in section and in any position complete all as specified and directed.

M&L steel work in tubular trusses/column, railing, grills etc incl special shaped washer etc complete using ERW or induction butt welded tube confirming to IS 1161:1979 grade 240 complete all as specified and directed.

M&L for Double charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished including 15 thick screed bed in CM 1:6 for laying of floor finishes of tiles area of each tiles exceeding 0.36 sqm but n exc 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including dismantling of floor tiles including cement mortar bedding but not backing removing unserviciable tiles to stores complete all as specified and directed.

M&L for Double charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished on vertical surface of wall, area of each tiles exceeding 0.42 sqm but n exc 1 sqm , in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 10 mm thick rendering in cement mortar 1:4 including dismantling of floor tiles including cement mortar bedding but not backing removing unserviciable tiles to store complete all as specified and directed.

Material & labour for non skid ceramic coloured tiles 7mm to 8mm thick (Square/rectangular) area of each tile exc 0.18 Sqm and n.exc 0.38 sqm coloured in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement in & including 15 mm thick screed bed in CM 1:6 for floor tiles including dismantling of floor tiles incl cement mortar bedding but not backing removing serviciable tiles to store complete all as specified and directed.

M&L for glazed ceremic coloured tiled in vertical surfaces 450mmx350mmx7 mm thick(as approved by Engr-in-Charge) set and jointed in neat cement slurry and pointed in white or colour cement in including 10 mm thick rendering in CM 1:4 for wall tiles to match includiing dismantling of wall tiles incl cement mortar bedding but not backing removing serviciable tiles to stores complete all as specified all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for machine cut kota stone slab flooring 15-18 mm thick over & including 15 mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for machine cut kota stone slab in riser of steps, skirting, dado and pillar laid over & including cement screed 10mm thick in CM 1:4 & jointed with grey cement slurry mixed with pigment to match the smooth of the slab incl rubbing & polishing complete all as specified and directed.

Taking down cement plaster from brick or stone walls any description including raking out joints, hacking for key, scrubbing down with water to receive plaster removal of rubbish off the premises etc and M&L for rendering 15mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:4) finishing the surface even and fair without using extra cement complete all as specified and directed.

Taking down cement plaster from brick or stone walls any description including raking out joints, hacking for key, scrubbing down with water to receive plaster removal of rubbish off the premises etc and M&L 10mm thick rendering on fair faces of brick work or concrete surface in CM 1:6 as in internal walls to be finished even and smooth without using extra cement complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n exc 4.00 Sqm each complete all as specified and directed.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete of size 125mm X 60 mm complete all as specified and directed.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete of size 105mm X 60 mm complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm n exc 2.00 Sqm each complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area not exc 1.5 Sqm each complete all as specified and directed.

S&F 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamferd or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.24(a), etc complete all as specified and directed.

S&F 35 mm thick flush shutters, factory moulded designed door on both side complete all as specified and directed. Note:- Designed/Colour shall be approved by Engineer -in-Charge.

M&L for PCC (1:2:4) type B-1, using 20mm graded crushed stone aggregate as in bed block and filling in door frames complete all as specified and directed.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair 18 mm thick PVC sheet minimum 600 Kg Density grade 1 quality one side decorative lamination and other side plain white color to make kitchen cabinet/drawer/cupboard shutters fixed with epoxy coated screws solvent cement adhesive as per manufacturer instructions to make kitchen cabinet sides, top and bottom shelves inside complete all as specified and directed .

S&F in repair 18 mm thick PVC sheet minimum 600 Kg Density grade 1 quality both side plain white color to make kitchen cabinet/drawer/cupboard shutters fixed with epoxy coated screws solvent cement adhesive as per manufacturer instructions to make kitchen cabinet sides, top and bottom shelves inside complete all as specified and directed .

S&F 75 mm dia oval shape brass handle fancy type polished bright finish complete all as specified and directed

S&F 40 mm width continuous (piano) hinges mild steel bright finish or electrogalvanised complete all as specified and directed.

S&F magnetic catcher of size 20 mm X 50 mm suitable for cupboard shutter complete all as specified and directed

S&F in repairs Drawer side channel of std size and incl of roller for moving drawer, mild steel bright finish, or electrogalvanised, width of flap 30mm fixed in repair for modular kitchen complete all as specified and directed.

S&F in repair 19/20 mm thick Prelaminated particle board one side laminated cut to size as required and fixed in position for cabinets,cupboard etc complete all as specified and directed.

S&F factory made single extruded WPC (WOOD POLYMER COMPOSITE) solid door/window/ceosetory window and other frame/chowkhat of size 50x100mm comprising of virgin PVC polymer of K value 58 to 60 (suspension grade calcium carbonate and natural fibre (wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grms complete all as specified and directed.

Providing and fixing factory made single extruded WPC wood polymer composite and decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 suspension grade calcium carbonate and natural fibre (wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grms complete all as specified and directed.

S&F powder coated anodised aluminium window/ventilator shutter sliding type with styles, rails size 40mm x 20mm, frame for chowkat size 30mm x 90mm, fixed glazing, all are made from aluminium anodised section including necessary jointing cleat, glazing clips, rubber packing, anodised aluminium snap beading, screws of suitable size with and including 4mm thick frosted glass /tinned glass etc complete all as specified and directed. Note:- (i) Three Nos of track to be provided. (ii) In three tracks, shutter with frosted glass / tinned glass, wire gauge 0.56mm dia. (iii) Thickness of aluminium section shall not be less than 1.00 mm)

S&F 140mm Floor door stopper of aluminium alloy body and tongue, with hard drawn steel spring complete all as specified and directed.

S&F 100mm long stainless steel hinge pin complete all as specified as directed.

S&F steel tower bolts 200 mm complete all as specified as directed.

S&F 125 mm long steel handles complete all as specified as directed .

S&F steel sliding door bolt 250mm long with hasp, staple (bolt type) and fixing with four numbers nut and bolts complete all as specified and directed.

M&L for preparation of new wood surface and applying two coat of synthetic enamel paint over a coat of pink primer on wood/plywood based surface of over 10cm width or girth complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks exc 250 ltr and n.exc 500 ltr capacity and from mouths of circulating pipe date of cleaning to mentioned complete all as specified and directed.

S&F in repair stainless steel kitchen sink with drainage board of over all size 915 mm X 460 mm and bowl size 410 mm X 330 mm X 160 mm, 1 mm thick with plug washers and wastes ; including bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and directed.

S&F 1 mm thick stainless steel kitchen plate rack 750 x 900 mm of fixed in repair complete all as specified and directed.

Repair to steel window/door such as box type hinge ,handles,(welding where required) make functional complete all as specified and directed

S&F in repair chromium plated shower roses with or without swivel joints, size 125 mm dia incl fixing to steel pipe or union complete all as specified and directed by Engr-in-charge.

S&F in repair 15 mm bore dia bib cock fancy type chromium plated cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe, complete all as specified and directed by Engr-in-charge.

S&F in repair 40 mm bore of discharge pipeBottle trap for WHB of brass chromium plated having minimum water seal of 25mm complete all as specified and directed.

M&L for fixed in repairs existing wall mixer 3 in 1/center hole mixture like as Leg, extension nipple etc complete all as specified and directed.

S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type ,screwed down high pressure, with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe of dia 15 mm. complete all as specified and directed.

S&F in repair 15 mm bore brass CP wall mixer with provision of overhead shower with 115 mm long bend pipe on upper side, connecting legs and wall flanges for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm bore dia Angle valve/ stop valves with wall flange cast copper alloy fancy type cromium plated screwed down both ends for iron pipe complete all as specified and directed

S&F in repair 32mm bore PVC waste pipe for WHB, complete all as specified and directed by Engr-in-charge. Make : Prayag and as equivalent

S&F in repair PVC low level flushing cistern 10 Ltr capacity syphonic action type , white with inlet ball valve float and handle including brackets complete and including PVC flush pipe 32mm dia low or high density for low level cistern complete all as specified and directed by Engr-in-charge.

S&F in repair of 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge.(Minmum weight 210 gms).

S&F in repair of 25 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge.

S&F toilet paper holder with flap complete all as specified and directed. Make- Jaguar cat part No. CAN-1153S and equivalent Cat Part of make as specified in list of make.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F towel ring square complete all as specified and directed. Make- Jaquar cat Part No. ACN 1121N and equivalent Cat Part of make as specified in list of make.

S & F corner glass shelf with bracket complete all as specified and directed. Make- Jaquar cat part No.ACN-1173 and equivalent Cat Part of make as specified in list of make.

S&F in repair looking mirror 5 to 6 mm thick fixed on 8mm thick commercial decorative water proofing ply wood with coloured PVC frame all around and hook (shade as approved by AGE (I)) complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back size 550mm x 400 mm excluding taps waste chain and plug but including bracket, waste coupling of 32 mm size fixed in repair complete all as specified and directed by Engineer-in-Charge.

S&F in repair Vitreous china wash down water closet pedestral pan white, including 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of polythylene of low or high density or PVC 32mm dia, Plastic water closet seat, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed.

S&F in repair vitreous china squatting pan, Orissa pattern size 580mm x 440mm with integral foot rest including connection to trap and to flush pipe, anti-syphonage pipe etc complete all as specified and directed.

Taking up or down steel tubing and connection 15 mm bore and removing the same from site/keeping aside for reuse with & including S&F water tubing 15 mm bore, medium weight, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed.

Taking up or down steel tubing and connection 20 mm bore and removing the same from site/keeping aside for reuse with & including S&F water tubing 20 mm bore, medium weight, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) and S&F 75mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) and S&F 110mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F in repair 75mm PVC floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

S&F interior vertical vanishing blinds for windows including all accessories and fittings of superior quality as approved complete all as specified and directed.

Demolition of Brickwork/Stone masonary built in cement mortar including all quoins,arches,pillars etc but excluding ashlar facings,dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius in CM 1:6 complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on brick masonry surfaces to be finished fair and even complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection, finishing cement concrete surface even and smooth without using extra cement. Note-Plinth protection will be laid in outward slope of 1 in 12 and in alternative bays/panel.L ength of panel shall not exceed 2.5 m and joint between two panel shall be filled with mastic filling comrimising mixture of one part of hot blown bitumen 85/25 penetration and two part of heated sand complete all as specified and directed.

M&L for 4.8 mm thick sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for 4.8 mm thick frosted sheet glass ordinary quality and glazing with beading n exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for 10 mm thick toughned glass as in hinge doors,partition automatic doors and similar work including cutting to shape,drilling complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips and S&F 3.0 mm thick plain acrylic sheet in square n exc .5 sqm each pane with rivet/nut bolt up to three storey hight complete all as specified and directed by Engr-in-charge

M&L for preparing new plastered or unplastered surfaces of wall and applying two coats of exterior emulsion paint over a coat exterior wall primer with & including of not less than 01 mm thick wall care putty primer complete all as specified and directed.

M&L for applying two coats of exterior emulsion paint with primer on wall including prepartion of wall complete all as specified and directed.

M&L for applying one coats of exterior emulsion paint over roof sheet incl complete removal of existing surface complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered or unplastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of not less than 01 mm thick wall care putty and including a coat of exterior wall primer & complete removal of existing surface complete all as specified and directed. 1-Note-Exterior primer & acrylic emulsion paint to be applied on wall surface by using Airless spray technology with working pressure of 3300 PSI and capable of operating single spray gun with max material hose length of 30 mtr.The spray machine shouild be of reputed manufacturer with pro gaurd technology and capability of tracking pressure.2-Allow 6-8 hrs to dry the surface for painting of subsequent coat complete all as specified and directed.

S&F stainless steel curtain rod of 20 mm dia with fixing brackets, incl side brackets, finals complete all as specified and directed.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. area not exceeding 2.00 Sqm Each complete all as specified and directed.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47mm x 50 mm mullion 47mm x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid seprately).

M&L for repairs to aluminium doors/ windows, re-arrange / replacement of damaged rubber beading and tightening etc and refixing in the same opening, area of each door / window shutter exc 1.0 Sqm but n.exc. 2.0 Sqm each including replacement of unserviceable fittings and fixtures complete all as directed .

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and directed .

S&F anodised aluminium door shutters, using aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc complete all as specified and directed.

S&F brass chromium plated 2 way bib cock with wall flange 15 mm dia including fixing to pipe complete all as specified and directed. Make : Jaquar Cat No. F-2008161 or equivalent Cat Part of make as specified in list of make.

S&F Health faucet brass body with 8 mm dia 1.00 m long flexible tube and wall hook including fixing complete all as specified and directed.

M&L of jet spray with complete set including pipe complete all as specified as directed by Engineer-in-Charge

M&L for preparation of new plastered surface and applying two coat of oil bound distemper on walls over a coat of primer incl 1mm thick wall care putty complete all as specified and directed.

M&L for preparing old surface plastered or unplastered and applying one coat of oil bound distemper on walls complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coat of oil bound distemper on walls over a coat of primer and 1 mm thick wall care putty complete all as specified and directed.

M&L preparation of old painted wooden /wood based materials surfaces of any description , not otherwise described ,over 10 cm width or girth and painting one coat with synthetic enamel including cleaning, stopping and rubbing down and removing all dropings etc complete all as specified and directed.

Supply and fix 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete and including dismantling of old tank complete all as specified and directed.

Supply and fix 1000 litres capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete and including dismantling of old tank complete all as specified and directed.

S&F in repair 20 mm dia Gun metal, globe or gate valves,with iron wheel head,screwed both ends for iron pipes and fixed complete all as specified and directed.

Dismantling brick tiles any size laid bedded and pointed in any mortar complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone agg) in roof padding finishing the surface fair & even complete all as specified and directed.

M&L for preparation of newly plastered surface of roof including cleaning the surface by using wire brush/ pressure hose and applying high performance polyurethane liquid membrane roof casting cold applied in two coats @ 1.5 Kg/Sqm applied with spray/brush an elongation of 300% to 700% and tensile strength of not less than 3N/Sqmm as per ASTM D412 and ASTM D2370, crack bridging ability of 3.5 mm as per ASTM C 1305, shore a hardness of not less than 60as ASTM D 2240. The item includes epoxy prime applied @ 0.15 Kg/Sqm and a geotextile of 40 GSM to be applied over first coat while first coat is still wet complete as per manufacturer's instructions and sound engineering practice complete all as specified and directed.

M&L for screed bed 10 mm thick in cement mortar 1:3 over roof slab mixed with mixing of water proofing compound ( WPC to be measured and paid separately) as per manufacturer’s instructions finished even & fair complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for 15-18 mm thick Granite slab work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in & including 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including making hole for gas pipe in pre-cast slab as well as stone slab in cooking platform complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directed.

M&L for green Marble work 15 to 18 mm thick (table rubbed and polished) in steps,riser jambs, pillars, windowcills,cooking platforms and like in & including cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types complete all as specified and directed .

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) incl chequered tiling and Paver blocks complete all as specified and directed.

M&L for 1st quality non skid coloured ceramic ENDURA tiles exc 0.06 Sqm & n exc 0.11 Sqm 10 mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for 75 mm thick cement concrete type-C-2, 1:3:6 using 40mm graded crushed stone aggregate finished cement concrete surface even and smooth without using extra cement in floor complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on concrete surface in ceiling complete all as specified and directed.

M&L for preparation of old/new surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

S&F in repair 110mm PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 75mm PVC (SWR) bends any radius complete all as specified and directed.

Demolition of PCC of any description and in any position not specifically provided for complete all as specified and directed

M&L for Treatment to sunken floor and sides as mentioned here after:- (Step-I)Cleaning of RCC surface to remove existing treatment to sides and base slab by using sand blasting with compressed air. (Step-II)M&L application of a coat to sides and base of sunken with glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal -107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika Fab-I and top coat with Sika Seal-107@ 1.50 Kg/Sqm or equivalent of Forsoc or pidilite. (Step-III) M&L 15 mm thick cement plaster on side and base slab of sunken part in cement mortar 1:3 mixed with appropriate integral water proofing compound with Sika Plastocree plus as specified. (Step-IV)M&L applying evenly a tack coat of industrial bitumen 85/25 @ 1.20 Kg/Sqm on plastered surface of sunken sides & base.Note:All debris obtained from site will be thrown away out side Def Land by contractor at his own expense.

M&L for Cement concrete 1:5:10 type E2 using 40mm graded crushed stone aggregate as in sunken part of slab complete all as specified and directed.

M&L for Providing 25 mm thick, cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate in flooring in sunken slab complete all as specified and directed.

Plain solid straight chowkats and frames of 2nd class hard wood wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete including tarring back of chowkats complete all as specified and directed.

S&F in repair Vitreous china urinal half stall complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass secrews, pointing around urinal in back in cement; fixing automatic cistern with brackts, flush pipe, grating and union for discharge pipe complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 as in Slab supported on wall, beams, column in floor , landings, balconies, canopies, deck slabs and in the shelves, cover slab complete all as specified and directed..

M&L for form work to sides and soffits of slab, beams, columns, shelves etc for rough finished surfaces of concrete complete all as specifed and directed.

Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending, binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specifed and directed.

A K BANDHUS (BID ID -3437413)

WADAIHRA CONSTRUCTION (BID ID -3431139)