GE/863/EWS-T-75 OF 2025-26 COMPREHENSIVE BR REPAIR IN DIFFERENT BLDGS OF OTM ACCN, ROOF SHEET,

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M & L for rendering 15mm thick in cement plaster 1:4 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finishing even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified

M &L for 25 mm thick PCC 1:4:8 type D2 (Using 12.5 mm graded stone aggregate) as in sub base in floors complete all as specified and directed by Engr-in-charge

M&L screed bed or bedding layer of morter 15 mm thick cement plaster 1:6 for laying floor finished to receive floor tiles/granite.

M & L for Virified Ceramic tiles Light shed 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L Glazed ceramic tiles in vertical surfaces 350 x 250 x7 mm/ 450 x 350 x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles complete all as specified and directed by Engr-in-charge.

Dismantling of stone slab and tiles of any description or thikness in floors ,apron etc complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed bed 20 mm thick cement plaster 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-charge. .

M&L for 50 mm thick cement concrete type D-2 (1:4:8) using 40 mm graded stone aggregate as in sub base under Chequered tiles.

M&L for chequered cement concrete tiles 20 cm by 20 cm by 25 mm thick including screed bed 20mm thick in (CM 1:6) , with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors.

Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate) in , rounded or chamfered on edges coping.

M&L for Cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) 75 mm thick as in plinth protections, surface finished even and smooth w/o using extra cement including 3 mm thick glass dividing strip of figured glass , pin headed type, 73 mm wide inserted in position complete all as specified and as directed.

S & F in repairs Vitreous China Half stall type urinals, white, with geating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe, complete, all as specified and directed.

S & F in repairs PVC valveless, syphonic action type, flushing cistern(twin type) of 10 ltrs capacity, high or low level, white, with inlet, ball valve, float and handle including brackets, and connections to flush pipes of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.

S&F in repair brass CP Stop cock/ Angle cock 15mm fancy type choromium platedetc, complete all as specified and as directed.

S&Fin repairs pillar taps cast copper alloy capstan heads, chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed shank and fly nuts screwed for iron pipe and fixed bore of pipe 15mm complete all as specified and direrected.

S&F in repairs bib taps cast copper alloy , choromium plated ,with crutch or butter fly handle screwed down screwed for iron pipe etc complete 15mm dia complete all as specified and as directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repair towel rail 600mm long of PTMT fixed with and including chromium plated brass screw and wooden/plastic cleats of weight minimum 190grm complete all as specified and as directed.

S&F in repair brass CP mixer, 15mm bore ,for mixing hot & cold water screw down for iron pipe , complete all as specified and as directed.

S&F in repairs Stainless steel sink with draining board made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mmx330mmx160mm

S&F in repairs 15mm dia pillar tap of CP any colour high pressure screwed for iron pipes of make-Prayag ( min wt 110grms)

S & F in repairs 20 mm dia Aluminium anodised tubular towel rail, D type, 60cm long between flanges complete all as specified and directed.

S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed.

S&F in repair CP jet with 15mm bore flexible connecting pipe complete with all assembly as directed.

S & F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws embedded in the wall, complete, all as specified and directed.

S & F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Refixing of Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets.

M&L for 4 mm thick decorative veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces fixed with screws to timber frame work as in wall pannelling/ceiling/cup board shutters complete all as specified & directed.

M&L for 9mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on only one face has decorative veneer fixed to timber frame work

Dismantling Unframed timber scantlings 40 Sq. cm and over in section and in any position complete all as specified.

M&L 2nd class hard wood in scantling timber framed work fixed clean sawn directed complete all as specified and directed by Engr-in-charge.

Dismantling Unframed timber scantlings under 40 sq. cm in fillets, rails, posts, rafters, purlins, etc. in any position complete all as specified.

S&F Second class hard wood plain fillets,wrought,square, rectangular or triangular in section,secured with screws,cross sectional area exc 3 sq cm and not exc 6 Sq. cm

S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

S & F oil putty

Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified & directed.

M&L for 4 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified & directed.

Schedule of Credit

M/S PYARE LAL (BID ID -3510797)