SPL REPAIR TO BLDG NO P 27 TYPE II MD ACCN INCLUDING PROVISION OF SHED AND ROOF FOR 01 SILENT DIESEL GENERATOR SET OF 20 KVA AND TWO WHEELER PARKING FOR JCOS OR AT BLDG NO P 49 OFFICE COMPLEX INCLUDING CERTAIN LBW WORKS UNDER GE I GOS

Amount

Taking down chowkhats with shutters not exc. 1.5 sqm each complete all as specified and directed.

Taking down chowkhats with shutters exc. 1.5sqm but.not exc. 4 sqm each complete all as specified and directed

S&F 2nd class Hard wood in plain, solid, straight chowkats and frames wrought framed, rebated on the solid, rounded or chamfered put together with glue pinned joints complete all as specified and directed

S&F Bands, straps, clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and directed

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate for fixing of hold fast and making good complete all as specified and directed

S & F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides to match complete all as specified and directed

S&F 30 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete all as specified and directed

S&FFactory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing shown in section 8 of SSR part -II complete all as specified and directed

S&F 100mm size butt hinges medium weight (ISI Marked), rolled mild steel complete all as specified and directed

S&F 150mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and directed

S&F 150mm size Aluminium anodized barrel Tower bolts of extruded section and fixed complete all as specified and directed

S&F Aluminium alloy, anodized, sliding door bolt (ISI Marked) of 300mm with hasp & staple (Bolt type) and fixing clips of sheets, coat or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required cessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) (A) Area not exceeding 2.00 sqm each complete all as specified and directed.

M&L two coat of synthetic enamel paint over one coat of pink primer including preparation of wooden surface of any description complete all as specified and directed.

M&L 18/19 mm thickness Block boards, grade 2 quality, i n t e r i o r grade, commercial type, fixed with screws to timber frame-work as in cup board shutters etc complete all as specified and directed.

M&L 0.9 mm thickness Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F 40mm dia cub board knob brass polished fixed with nut screw and washer of mild steel bright finished complete all as specified and directed.

S&F stainless steel heavy duty magnetic door catcher for cupboard door, size 54mm x 26mm x 16 mm incl latting in and fixed complete all as specified and directed.

Taking down existing water proofing membrane and cleaning roof, 15mm thick plastered surface etc preparing the surface to receive plaster by brushing with wire brush and fanning the surface to remove all loose dirt etc and brushing neat cement slurry @ 3.00 Kg/Sqm including 15 mm thick plastered in cement morter 1:4 with water proofing comound complete all as specified and directed.

M&L for water proofing treatment for roof slabs by applying bitumen primer @ 0.3 ltr/sqm then applying hot blown bitumen 85/25 @ 1.20kg/sqm and laying 3 mm thickwater proofing membrance modified with glass mat reinforcement weight not less than 3 kg /sqm with overlap of 100 mm and end lap 150 mm and finally applying aluminium based pain on top complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) rubbish off the premises complete all as specified and directed.

M&L for non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No 25 above but on skirting/dado incl 10mm thick rendering of backing layer in CM 1:4 complete all as specified and directed.

M&L coloured Glazed ceramic tiles in vertical surface 450X 350X 7mm thick in dado set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles incl 10mm thick rendering of backing layer in CM 1:4 complete all as specified and directed.

M&L Cement concrete tiles 20 cm x 20cm x 20mm thick with grey cement and no pigment to fixed at roof above waterproofing treatment, set and jointed in neat cement slurry and pointed in coloured cement incl 15 mm thick screed bed in CM 1:6 complete all as specified and as directed

M&L 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, pillars, arches etc complete all as specified and directed.

M&L Brick work with modular fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface of wall and finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface of ceiling/chajjas etc and finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5 mm thick in cement and sand mortar 1:3 on concrete surfaces of ceiling including finishing the surface even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of oil bound distemper over one coat of primer with 3 mm thick wall care putty complete all as specified and directed.

M&L complete removal of existing treatment on walls and applying two coats of oil bound distemper over one coat primer with 3 mm thick wall care putty to walls complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of oil bound distemper over one coat of primer with 3 mm thick wall care putty to ceiling complete all as specified and directed.

M&L complete removal of existing treatment on walls and applying two coats of oil bound distemper over one caot of primer with 3 mm thick wall care putty to ceiling complete all as specified and directed.

M&L for preparaion of newly plastered or unplasetered surfaces and applying finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)® walls complete all as specified and directed.

M&L complete removal of existing treatment on wall including removal of vegetation and applying finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)® walls complete all as specified and directed.

M&L Preparation of new or previously untreated steel surfaces of any description not exc 10 cm width or girth and priming with red oxide zinc chrome and painting with two coats of synthetic enamel paint complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and pavings n. exc 15 cm thick (above or below ground level) complete all as specified and directed.

M & L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate)as in sub base, Paving, plinth protection, finished even and fair without using extra cement complete all as specified and directed.

M&L PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) 100 mm thick as a sub base of floor complete all as specified and directed.

M&L for 20mm thick screed bed in cement mortar(1:6) as in bedding of chequered tiles. complete all as specified and directed.

M&L for chequered cement concrete tiles 20 cmx20cmx25mm thick set, jointed and painted with grey cement and no pigment in neat cement slurry in floors complete all as specified and directed.

S&F in repair vitreous china wash basin, white flat back 580mmx450mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with internal footrest (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair PVC low level flushing cistern (white) 10 Ltrs capacity with internal fitting, push button operated type with and including bracket, PVC flush pipe etc complete all as specified and directed.

S&F in repair sink with draining board made out of stainless steel 1.00 mm thick sheet for kitchen with plugs, washers and wastes including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm with bowl size 410 mm x 330mm x 160mm complete all as specified and directed.

S&F in repair 1 mm thick stainless steel plate rack of size 900x600x200mm including fixing with rawal plug and screws complete all as specified and directed Make Blue Star cat No kpr - 313/ kpr- 314 or equivalent of nirali/ parryware complete all as specified and directed.

S&F in repair Tubular towel rail brass chromium plated 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls complete all as specified and directed.

S & F in repair Chromium plated shower roses with or without swivel joints, of size 125 mm, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair Angle valve 15mm bore brass chromium plated with capstan head screwed for iron/CPVC pipe complete all as specified and directed.

S & F in repairs grating doom 125mm dia with waste hole of PTMT fixed on floor/nahani trap with cement (Minimum weight 40 gms) complete all as specified and directed.

S & F in repairs PVC waste pipe 32mm dia, 60 cm long for WHB with cup complete all as specified and directed.

All as per Item No 56 above but 40mm dia for sink complete all as specified and directed.

S & F in repairs stainless steel waste coupling for S.S Sink 75mm to 100mm dia set with rubber washer plug etc complete all as specified and directed.

S&F in repair PVC connection 15 mm size, of length 450 mm, with PTMT nuts complete all as specified and directed.

Taking up or down steel water tubing and connections of following descriptions :- (a) 15 mm bore

(b) 20 mm bore

Supply and laying CPVC pipes SDR 11 & Plain CPVC 11 fitting on walls/ceiling or laying in floor complete all as specified of following descriptions :- (a) 16 mm outer dia

(b) 20 mm outer dia

S&F CPVC Brass Elbow (a) 16 mm outer dia

(b) 20 mm outer dia

S&F CPVC Brass Elbow (3/4 x1/2) 20 mm outer dia

S&F CPVC Brass Tee (a) 16 mm outer dia

(b) 20 mm outer dia

S&F CPVC Male Brass Threaded Adaptor (MTA/MBTA) (a) 16 mm outer dia

(b) 20 mm outer dia

S&F CPVC Female Brass Threaded Adaptor (FTA/FBTA) (a) 16 mm outer dia

(b) 20 mm outer dia

S&F CPVC Tank adaptor 20 mm outer dia

S&F CPVC Union (a) 16 mm outer dia

(b) 20 mm outer dia

S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms) complete all as specified and directed.

S&F in repairs gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm bore complete all as specified and directed.

S&F in repair 15 mm fancy type pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts complete all as specified and directed.

S&F in repair 15 mm fancy type stop valve cast copper alloy chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm bore GI tube complete all as specified and directed.

S&F in repair 15mm bore bib tap cast copper alloy chromium plated with crutch or butterfly handle fixed to 15 mm bore GI tube complete all as specified and directed.

S&F in repair sheet glass shelf assembly consinsting of 5.5 mm thick sheet glass shelf 12 CM wide with CP bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repair 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed.

Supply only 32mm dia flush pipe of polythelene of low or high density, for low or high level flushing cistern complete all as specified and directed.

S&F in repair CI 'P' or 'S' trap of 100mm size complete all as specified and directed.

Dismantling PVC water storage tanks exc 1000 ltr but n. exc 2000 ltr capacity and removing to store complete all as specified and directed.

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

S&F in repair 25/32 mm dia decorative/drapery curtain rod with bub & Bracket & internal tunnels complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair soap dish,chromium plated, 100X100X60mm, fixed to wall with plugs with chromium plated screws complete all as specified and directed.

S&F rounded solid metal Stainless steel wall hanger hat and coat hook rail 6 pin set wall mount with screws to fixed with wall for hanging of clothes, towel, hats etc complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

S&F Framed work such as grill grating, doors or gates with ends of bars shouldered and / or rivetted, or forged into spikes, framed gurad bars, barred iron doors, ladders, framed balusters, walk ways railings and similar work confirming to Fe 290 Gde E-165 of any section and sizes complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws incl ridge complete all as specified and directed.

S&F steel work in tubular poles & trusses (framed) including purlins,rafters and special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS-1161-1979 grade St-240 complete all as specified and directed.

S&F ball catches with 8mm dia steel ball and brass body and striking palte incl latting in and fixed complete all as specified and directed.

Excavation in post holes (or similar holes) each n.exc 0.5 Cum getting out in, any types of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed.

M&L PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate as in foundations filling and mass concrete complete all as specified and directed.

M&L Plain, galvanised, mild steel sheeting 0.63 mm thickness, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L Brick work with modular fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

Hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 100 mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) in sub base of floor complete all as specified and directed.

M& L for Sand filling under floors or in foundations etc incl watering and consolidation, complete all as specified and directed.

M&L for machine pressed precast concrete inter locking paver block of any shape and size confirming to IS 15658-2006 of thickness 60mm, M-35 grade set and jointed with neat grey cement and pigment etc complete all as specified and directed..

M&L for cement concrete Type B0 1:2:4 (using 12.5mm graded stone aggregate) as in copings, band, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Excavation over areas n exc 1.5 m deep and getting out in hard / dense soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n exc 25 cm thick complete all as specified and directed.

Removing excavated materials n exc 50 m and deposited where directed at level n exc 1.5 m above the starting point complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L Brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:3 Complete all as specified and directed.

M & L for rendering 15 mm thick in CM (1:4)on fair faces of brickwork or concrete surface, finished even and smooth using extra cement including mixing of water proofing compound @ 3 % by wt of cement or as per manufacturer's instructions (supply only WPC shall be measured & paid separately) for internal surfaces of manholes.

M&L for cement concrete 1:3:6, type C-1 (using 20 mm graded stone aggregate) as in copings, band, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

M&L for Reinforced cement concrete pipes, 450mm bore, class NP2, laid and jointed complete with collars laid in trenches at any depth including jointing and testing complete all as specified and directed.

M&L for filling the road / hard stansding cut for laying 450 mm bore NP-2 pipe with PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) and finishing the surface even and smooth without using extra cement complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light, fan/exhaust fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders, brackets, bulk head fittings etc removing material to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately ) and also making good disturbed surfaces of wall, floors etc complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm copper conductor (Multi-stranded) PVC insulated and unsheating FRLS electric cable 1100 volts cable and including concealed in PVC conduit 20 mm dia ISI marked or suitable size (as per conductor run) with all fittings/ accessories and including PVC insulated electric cable 1100 volts 1.5 Sqmm ( multi-stranded) copper conductor single core( Green colour) cable as continuous earth wire connected to common earth dolly by providing lugs including sunk in pressed steel terminal boxes of 1.6 mm thick concealed in wall (duly painted with two coats of black bituminous paint over a coat of red oxide primer in and out sides) with and including cutting holes for switches, sockets, regulators etc as per requirement including fixing with machine screw, washer etc for one light point/bell point etc controlled by one, one way switch complete and making good the disturbed surfaces with cement work/putty as per existing including colour/white wash/distemper to match with existing same complete all as specified and directed. (a) One light point controlled by one, one way switch

(b) One fan/exhaust fan point controlled by one, one way switch

(c) One 5 Amp socket point controlled by one way switch on same board.

All as per item No 126 above, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and directed.

M&L for socket outlet 2 in 1, 3 pin, 5A flush type complete all as specified and directed.

M&L for socket outlet 2 in 1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and directed.

M&L for Switch piano flush type single pole one way 15 Amp complete all as specified and directed.

M&L for Switch piano flush button 5 Amps complete all as specified and directed.

M&L for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all as specified and directed.

S&F for sub main wiring two single core PVC insulated and unsheathed cable with 4 Sqmm multi -strand copper conductor drawing in PVC casing caping with 2.5 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiring complete all as specified and directed.

S&F Sheet metal enclosure for DB’s suitable for MCBs of single pole and neutral 8 way (Double door) with 200 amp rated bus bar complete all as specified and directed.

S&F Isolator DP 40A, 240 volts complete all as specified and directed.

S&F MCB SP up to 40 Amp, 240 volt complete all as specified and directed.

S&F Ceiling Fan regulator electronic step type complete all as specified and directed.

M&L for PVC rectangular block of size 25 cmx20cmx5cm depth, closed recessed 3mm thick plastic laminated sheet complete all as specified and directed.

S&F Energy efficient LED integrated batten suitable for indoor applications tube light fitting 1x20 Watt 4 FT complete all as specified and directed.

S&F LED Bulk Head fitting complete all as specified and directed.

S & F LED light fitting 1 x 10 Watt T5 Alumnium batten type, indoor decorative PC housing extruded T5 Al LED battens with extruded aluminium housing and integrated LED driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size incl taking down the old USNV complete all as specified and directed

S&F LED Lamp pin type 9 watt all as per C&S Cat Part No LTHPLEDLAMP9W22 BULB or equivalent in Surya/Wipro.

S&F Ceiling Fan 1200 mm sweep with blade, down rod complete all as specified and directed.

S&F exhaust fan 300 mm sweep, 1400 RPM with louver complete all as specified and directed.

Supply and laying for 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheating of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire one twin core cable flat or circular single stranded conductor size 10 Sqmm , including taking down old cable complete all as specified and directed.

M&L earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 Metres below normal ground level, connecting to the Galvanised iron earth lead wire 4mm dia, by means of bolts, nuts, check nuts and washers of galvanised iron and 4mm earth lead protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of 75x50x6mm phosphorous bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR-2009 Part-I and connecting to earth test point including testing on complete all as specified and directed.

S&F replacent GI pipe light grade with all fittings laid in trenches/walls of size 20 mm bore complete all as specified and directed.

M& L for 16 meter high galvanised mast suitable for 9 nos 400W LED flood light symmetrically fitted along with their control box and having two point suspension system with steel wire rope of 6 mm dia and double drum winch, power tools with folowing complete all as specified and directed. Make: JINDAL/BAJAJ/CROMPTON GREAVES (a) High mast is fabricated from steel plates conforming to BS-EN 10025, cut and folded to from a polygonal section. Masts are in three sections for 16 mtr heights having only longitudinal weld conforming to BS 5135/AWS. The mast is provided with a fully penetrated flange which is free from any laminations or incursions. The welded connection of the base flange is fully developed to the strength of the entire structure. The base flange is provided bolt holes to ensure elimination of helical stress concentration. For enviornmental protection of the mast, the entire fabricated mast is Hot Dip Galvanised (Single Dip) internally and externally, having uniform coating thickness of 85/ 65 microns for bottom/top sections respectively. (b) Mast structure is designated to sustain an assumed maximum reaction arising from wind speed as per IS 875 (Part 3) 1987 (three seconds) which is measured at a height of 10 mtrs above ground level. (c) The high mast is provided with accessories which include a raising and lowering system (R&L), trailing cable, power tool, feeder pillar for automatic switching operation of luminaires, lighting finial and aviation obstruction warning light. (d) The R&L system will comprise of a double drum winch, SS wire ropes, head frame and lantern carriage. The winch is self lubricating and self sustaining type. It does not require any brake or cluth and has a lifting capacity of SWL 750 Kgs. (e) The wire ropes are of stainless steel grade AISI316 with minimum 6mm diameter and 7/19 construction. Its central cores is also SS and have a minimum breaking strength of 2350 Kgs. The power tool is integral type suitable for handling the total head load. It has a mechanical torque limiter to ensure safety and also a manual handle shall be provided. (f) Foundation of the high mast structure shall be as per manufacture design and as per site soil condition. (g) Outdoor type feeder piller for high mast made out of 2 mm thick CRCA sheet of approx - 800 x 600 x 300 mm including painting with two coats of synthetic enamelled paint over a coat of red oxide primer with 40 x 40 x 5mm angle iron frame at bottom and legs not less than 0.60 m and considt of the following:- (i) Aluminum bus bar suitable for 200 Amps mounted on insulator - 04 Nos (ii) MCCB 4 pole 63 Amps 415 volts bearing capacity 25 KA - 01 (iii) MCB 4 pole 32 Amps 415 volts - 02 Nos (iv) Time switch (Astro mini) 110-240V AC 1 Phase- 2 W I C/O, BASE/DIN - 01 No (v) Toggle switch to by pass supply - 01 No (vii) Voltmeter digital type with slector switch Note: (i) Incoming cable to be provided with suitable lugs & glands. (ii) All out going MCB, timer to be connected with proper size copper cable. Note for high mast (i) Work to be carried out as per standard specification of manufacturer. (ii) 5 core copper cable to be connected from feeder piller to top of high mast as per manufactuer specification. (iii) Single spike lightning final to be provided on the head frame of the top most point. (iv) Individual light control with cut out fuse to be provided at top terminal point. (v) Aviation light to be connected separately from feeder piller (i.e from incoming connection). (vi) Motor to be connected with incoming MCCB. (vii) The rate for 1(i) to (VI) including note for high mast are deemed to be included in the quoted rate.

Supply and fixing LED flood light 400 watt Lumos II new generation LED with high luminous efficacy of 120 lm/w protected to IP-66 with front toughened glass complte with 2 run of suitable flexible copper conductor of size 2.5 sq mm complete all as specified and directed. Make: C&S/SURYA/CROMPTON GREAVES

Supply and laying cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 Core Make: POLYCAB/HAVELLS/GLOSTER

Excavation in trenches in hard/dense soil n.exc 1.5 mtr wide and n.exc 1.5 mtr depth and getting out pole foundation/cable trench complete all as specified and directed.

Supply and laying sub class 'B' bricks well burnt locally available best quality for laying of cable protection in trenches including taking out old unserviceable bricks complete all as specified and directed.

Supply and providing sand cushioning with dry clean sand 8 cm below cable and 15 cm above the cable complete all as specified and directed. Note : Punned thickness shall be measured for the purpose of payments.

Supply and laying Tubes ' light grade' 40mm galvanized, with all fitting laid in trenches for cable protection.

Supply and fix Thermal Magnetic release, MCCB 63 Amps 415 Volts, 4 pole 25 KA, Ics=100% Icu, adjustable overload 80-100% and adjustable short circuit 5-10In complete with all required items complete all as specified and directed. Make: C&S/L&T/SCHINEDER

M/s Ats Electricals

M/s MAA BHAIRABI ENTERPRISES

M/S SIWALIK AND CO

HARAGOURI SUPPLIERS

G.KRISHNA MURTHY AND PARTNERS

ABC CONSTRUCTION COMPANY

R K Traders

DHABALESWAR ENGINEERING WORKS