REPAIRS TO COMMON AREA WINDOW VENTILATORS FLOORING PLINTH PROTECTION AND CONNECTED WORKS AT RS COLABA UNDER AGE BRII OF GE NW NAVY NAGAR COLABA MUMBAI

Amount

Dismantling stone slabs and tiles of any description or thickness in floors, aprons and paving laid dry or laid bedded and pointed in any mortar etc.complete all as specified and directed. Note : Work shall be carried out upto G+14 storey bldg. Rate incl scaffolding & Safety Net Cloth at places.

M&L hand cut Kota stone ( greenish colour, mirror polished) slab as in flooring and common area 20 to 25 mm thick over 20mm thick screed bed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and mirror polishing, complete all as specified.

all as per item No 2.00 above but as in skirting over & incl backing layer of 10mm thick in CM 1:4 complete all as specified..

M&L hand cut single one piece Kota stone ( greenish colour, mirror polished) slab as in riser of steps, skirting, dado 20 to 25 mm thick over 15 mm thick rendering in cement mortat 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and mirror polishing,complete all as specified directed. Note:-The riser of steps should be in one single numbers of piece.

M&L hand cut single one piece Kota stone ( greenish colour, mirror polished) slab as in treads, 20 to 25 mm thick over 20 mm thick screed bed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and mirror polishing, complete all as specified directed. Note:-The treads of steps should be in one single numbers of piece.

Taking down chowkats with shutter (without taking shutter from the frame) not exc 1.5 sqm each all complete.

S&F for machine cut kota stone slab single piece length as in jambs/cills of windows 18-20mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing (Note : kota stone single pice of Cill will be fixed in two steps) all complete as directed by Engr-in-Charge.

M&L for Screed bed or bedding layer of mortar 20 mm thick in CM 1:4 for laying kota stone in jams/ cills all complete as directed by Engr-in-Charge.

Rounding to edges of stone slabs one edge,such as in steps, windows frame, cooking plateform,and other similar situations.

M&L for extra two Nos grooves 2x2mm over stair case treads all as specified and directed by Engr-in-Charge.

Taking down shutters of any description n exc 1 sqm each.

All as per Item No 11.00 above but exc 1 sqm and n exc 2 sqm each.

S&F Second class hard wood factory made glazed and skeleton shutters 30-35 mm thick, open rebatede and prepared to receive glass, gauze etc (without sash bars), edge of framing plain chamfered of rounded, fitted with cut and mitred beads for securing glass etc. size of members of shutters shall be as specified in SSR Part I, section 8.20 (a).

S&F 35mm thick second class hard wood factory made plain framed panelled shutters (two panes) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board medium density with commercial veneering both face. The size of rail shall be as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated all as specified and directed.

All as per Item No 14.00 above but 30mm thick shutters for cupboards.

S & F 100mm size stainless steel butt hinges (ISI Marked).

S & F 75 mm size stainless steel butt hinges (ISI Marked).

S & F extruded aluminium alloy handles 150mm size, fabricated type, anodised.

S&F Aluminium, anodised, barrel tower bolts 150mm size of extruded section and fixed.

S&F in repairs Aluminium, anodised, hasp and staple 150 mm size, safety type with MS hinge pin including bolt to hinge plate and fixed with screws all complete.

S&F Aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast alumimnium alloy and fixed.

M&L for Preparation of new or previously untreated surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying one coat of pink primer and two coat of synthetic enamel paint, complete all as specified and as directed by EIC.

S & F powder coated aluminium frame/track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc.fixed or sliding type/louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified Complete all as specified.

M&L aluminium anodised grill with suitable aluminium anodised frame section manufactured by M/S Deco grill pattern DG-102 (10mm dia and aparture 75mm)

S&F 3mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square not exc 0.5 sqm in each pane.

S & F Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to doors,windows shutter, with wooden beading (any size) with aluminium wire staples and removing old beading, complete all as specified and directed.

Dismantling floor, hearth, or wall tiling incl cement mortar & bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.

M&L coloured glazed ceramic tiles 300x450x7mm on verticalsurfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment including Rendering 10mm thick in CM 1:4 backing coat to tiles all as specified.

M&L for Granite of 20 mm thick (any type or shade) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete as specified and directed by Engr-in-Charge.

Dismantling of MS grill of any description complete all as specified and directed.

S&F framed work as MS grills. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars barred iron doors, ladders framed balusters, walk ways, railings, framework of water tanks and similar work conform to Fe 290 Gde-E-165

S&F PVC covers to MS railings of stair case hand rail all as specified and directed by Engr-in-Charge.

M&L anodised aluminium sheeting 22 gauge thick fixed in repairs as in crumple section.

M&L for Preparation of New steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of antirush paint/Red oxide primer complete all as specified and directed.

Demolition of brick or strone / boulder work built in cement mortar including all quoins, arches, pillars etc .

M&L brick work with subclass B brick straight or curved on plan exc. 6m mean radius , built in cement mortar 1:4 all as specified .

Taking down cement plaster, any description on brick or stone walls, etc including racking out joints hacking for key scrubbing down with water etc.

M&L for Rendering 15mm thick in cement mortar 1:6 on other than of concrete surface complete all as specified and directed.

M&L for rendering 20mm thick in CM 1:4 in two coats (15mm thick backing coat and 5mm thick setting coat ) mixed with water proofing compound on fair faces of brick work or concrete surfaces , finished with sand faced plaster complete all as specified ( WPC shall be measured and paid separately ).

M&L for 10 mm thick plastering in CM 1:3 on concrete surface on ceiling finished even and smooth all specified & as directed.

Supply only integral water proofing compound.

M&L for preparing newly plastered or unplastered surfaces and applying two coats of oil emulsion distemper on wall over a coat of alkali resistant primer and applying 1.5 mm thick white cement putty all over the surface on new plasterd surfaces of wall all as specified.

M&L for Complete removal of existing treatment, Preparing surfaces, plastered or unplastered old surfaces priming plastered and other surfaces with alkali-resistant priming paint and applying 1.5 mm thick white cement putty all over the surface two coats of distemper oil emulsion, white or tinted on walls all as specified.

M & L for two coats of acrylic emulsion ext grade (100%Acrylic) one coat of acrylic primer including Preparation of new plastered surfaces of walls etc all as specified.

M&L for preparation of newly plastered surfaces on ceiling and applying three coats of white wash complete all as specified.

M&L for preparation of old surfaces on ceiling and applying two coat of white wash all as specified.

M&L for applying one coat of synthetic enamel paint including preparation of old wooden surfaces over 10cm width/girth all as specified and directed.

M&L preparation of old painted surfaces over 10cm width or girth and applying one coat of synthetic enamel paint on steel surfaces all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors & paving not exceeding 15 cm thick below & above Ground level complete all as specified & directed by Engineer in charge

M & L plain Cement concrete type C-1, 1:3:6 (using 20mm graded stone aggregate) in sub base , plinth protection, mass concrete , Pavings,hardstanding etc,complete all as specified.

M&L for Machine pressed precast concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand and cushing complete (Note : Sand cushing shall be measured and paid separetely).

M&L for Sand filling under floors or in foundation including watering and consolidation all complete.

S & F Precast plain cement concrete prepolished coloured chequerd floor tiles 300 x 300 x25 mm thick machine pressed set jointed and pointed in neat cement slurry mixed with pigment to match the colour of tiles in floors complete all as specified and directed.) Colour, size and pattern shall be approved by GE. (Cement Mortar screed bed shall be measured and paid separately).

M & L screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying tiles all as specified.

M&L for polishing of old / existing kota stone flooring as per specified and directed.

Removal of debries outside of MD land exc. 5 Km but n.exc. 10km.

sri ram construction

Unitech Enterprises

Diamond Construction