8892 PROVN OF CERTAIN SPECIAL REPAIRS, REVENUE WORK, MINOR WORK IN THE AREA OF MHCTC AREA UNDER AGE BR I SOUTH PUNE

Amount

Dismentling AC corrugated/ semicorrugated sheets in roofing complete all as specified and as directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating 150gms GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified incl dismantling of old sheet complete all as specified and as directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified incl dismantling of old sheet complete all as specified and as directed.

Dismantling of wrought iron of any description not otherwise provided for

M&L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plate, gusset plate and also erecting in true position complete all as specified and as directed.

M&L PCC 1:2:4 type B1 using 20mm graded stone agg as in roof kerbs or mud stops, rounded or chamfered on edges incl necessary form work required complete all as specified and as directed.

Dismantling ceiling/boarding of any description, fixed in any position like partition etc with nails including frame work of timber complete all as specified and as directed.

S&F POP false ceiling with 12 mm thick glass fibre reinforced Gypsum ceiling tiles of, prima fine fissured micro look white/any type coloured laid over including grid work 600 x 600mm using GI powder coated “T:” section grid (Silhaute type) as Main 'T' 38 X25 mm, Cross 'T" 25x25mm and wall angle 25x25mm grid and 6 mm dia GI suspension wire etc incl over a coat of 1-2 mm thick POP finish of any design complete all as specified and directed by Engr-in-Charge. [Make :- Saint-Gobain, Armstrong, Diamond or Equivalent.]

Preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Complete removal of existing treatment and applying two coats of laster paint white or tinted on walls with internal 1mm thick wall care putty complete all as specified and as directed.

M&L for two coats of OBD on walls over a coat alkaliresistance primer including preparation of old plaster surfaces of wall surfacese with 1 mm thick wall care putty complete all as specified and as directed.

Demolition of brick work or stone/boulders masonry built in Cement Mortar complete all as specified and as directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified & directed by Engr-in-Charge.

M&L for dubbing out average 15mm thick on irregular face of walling in CM 1 :6 by using ready mix plaster etc all as specified. [Make : Godrej / Build Well / Ascolite]

M&L for preparation of old painted wooden surfaces exe 10 cm width or girth all as specified in SSR Pt I 1991 and applying one coat of synthetic enamel paint complete all as specified and as directed. (Make : Asian paint/Nerolac/Berger)

Dismantling of single layer mangalore pattern or similar tiles in roofing laid dry complete all as specified and as directed.

Dismantling battens for tiles, shingles etc of any size including tilting fillets spaced exc. 15 cm complete all as specified and as directed.

Dismantling timber scantling, unframed in post, rafters, purlines etc under 40 sqcm in section where necessary complete all as specified and as directed.

Taking down /cutting steel windows shutter by means of gas cutter w/o disturbing of sofit/jambs/cills etc of any description n exc 1.5 sqm (without taking off guard bar) complete all as specified and as directed.

S&F three track sliding window with two or more shutter with 4mm thick tinted glass one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S & F ventilators/louvers using 4mm thick x 10cm wide froasted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed :- (a) SP 20048 (b) Glazing clips 19352

S&F false ceiling with 9 to 9.5mm thick glass fibre reinforced Gypsum ceiling tiles of size 595 X 595 mm, prima fine fissured micro look white coloured laid over including grid work 600x600mm using GI powder coated “T:” section grid as Main 'T' 38 X25 mm , cross 'T" 25x25mm and wall angle 25x25mm grid and 6 mm dia GI suspension wire etc complete all as specified and directed. [Make-Saint-Gobain, Armstrong, Diamond or Equivalent.]

M&L for complete removal of existing treatment of old wall surface and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer over 1mm thick wall care putty complete all as directed by Engr-in-charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete as specified and directed.

S & F 3.0mm thick sheet glass ordinary quality in squares or rectingular exc 0.5 sqm each pane

M&L for Granite slab, 18 to 20 mm thick of approved colour, laying in design pattern using approved colour granite slab strips all as directed by Engr-in-Charge, laid bedded & jointed in neat cement slurry and pointed in white/coloured cement to match the shade of slab, laid over and including 20 mm thick, screed bed in CM 1:6 including rubbing and polishing complete as in floors.

M & L for excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth , for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and as directed.

M & L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in hard/dense soil complete all as specified and as directed.

M & L for removing excavated material nexc 50 m and depositing where directed at a level n exc 1.5 m above the starting point in soils complete all as specified and as directed.

M&L moorum/ red bajri filling in floors or pavings, laid in layers n exc 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M & L for cement concrete Type- B2 1:2:4 (using 20 mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

M & L for hardcore of broken stone or boulder not exc. 63mm, deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 100 mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and as directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified & directed by Engr-in-Charge.

M&L for coloured ceramic tiles 7 to 8 mm thick 600 x 600mm size of approved colour, set, jointed in cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 20 mm thick screed bed in CM 1:6 etc complete as in flooring all as specified and directed.

M&L for glazed coloured digital printed ceramic tiles of size 300mm x 450mm x 7mm thick in vertical surfaceses etc set qnd jointed in neat cement slurry and pointed in coloured cement to match with colour tiles including 10mm thick backing coat in CM (1:4) and filleting at top etc complete all as specified and as directed.

M&L for 15 mm thick rendering on pcc/concreteblock wall surfaces in CM 1:6 finished with sagol finish to plastered surface etc. complete all as specified and as directed.

M&L for providing and fixing CP toilet fitting in repairs as specified and as directed by the Engr -in-Charge for the following:-.

Bib Cock CAT No. CON- 037KN

Soap dish CAT No. ACN-1131 N

Towel ring square CAT No. ACN 1121 N

Coat hook CAT No. ACN 1191 N

Single Towel rail 600mm long CAT No. ACN 1111 NM

Angular stop cock conforming to CAT No. 053 KN of "Jaquar" or of equivalent make specified here-in-after.

CP 15mm bore concealed stop cock regular body conforming to CAT No. CON-083KN of "Jaquar" or of Equivalent make specified here in after

M&L for gun metal globe valve with iron wheel fixed for 20mm bore pipe complete all as specified and as directed.

M&L for ball valve brass with polythelene float and fly nut fixed complete for 20 mm bore of pipe complete all as specified and as directed.

S&F oval shaped coloured vitreous china WHB of overall 600mm size including 32mm CP waste coupling, PVC waste pipe etc complete including Pillar cock long neck with aerator CAT No CON -021KN (Make - Jquar) directed by Engr-in-Charge.

M&L for PVC connection 15 mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S & F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, 'P' or 'S' type, inc. 10 litres, PVC flushing cistern, L L, white, with inlet,ball valve, float & brackets, inc. flush pipe, PVC tube 32mm dia. & inc. plastic water closet seat, black, closed pattern with flat bottem, & cover & M S CP or aluminium hinging device, complete.

M&L for PVC floor trap 100mm including jointing with CM 1:4 75mm dia complete all as specified and as directed.

M&L for Grating doom 100mm dia PTMT complete all as specified and as directed.

S&F PVC door frame of size 50 x 47mm made out of 5mm thick pre-laminated PVC sheet reinforced with mild steel sq tube complete all as specified and as directed.

S & F factory solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplying & fixing in frame at site as per specification & drawing complete given on Sl Page No. 161 of SSR Part-II 2010 as specified and directed by Engr-in-Charge.

M&L for mild steel electroplated butt hinges 100mm medium weight complete all as specified and as directed.

M&L for mild steel tower bolts 150mm long complete all as specified and as directed.

M&L for mild steel powder coated handles 150mm complete all as specified and as directed.

M&L for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with all fittings and fixture all as specified in SSR Part 1 capacity 1000 litres incl PTMT float valve with PVC ball 20mm bore of pipe complete all as specified and as directed.

S & F fixed glass ventilators using 5mm thick plain glass and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed :- (a) SP 20048 (b) Glazing clips 19352

S&F GI tubing tubes "medium grade" galvanized with all fittings and fixed concealed complete to walls and ceiling or laid in floors etc. including cutting chases and making sufaces good for following size :-

15 mm bore

20 mm bore

M & L for PVC (SWR) pipes single socketed in any length 110 mm dia complete all as specified and as directed.

M&L for PVC (SWR) pipes single socketed in any length 75mm dia complete all as specified and as directed.

M&L for PVC (SWR) bend/ elbow 110 mm dia complete all as specified and as directed.

M&L for PVC (SWR) bend/ elbow 75mm dia complete all as specified and as directed.

M&L for PVC (SWR) vent cowl 75 mm dia complete all as specified and as directed.

S&F Vitreous China urinals, half stall type, white Complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:3:6, type C2 75mm thick fair finished surfaces as in plinth protection/ foot path complete all as specified and as directed.

S&F MS framed work such as grills with ends of bars shouldered or riveted, or forged into spikes, framed guard bars or similar work using steel section conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed.

M&L for Two coats of cement based paint over a coat of cement based primer including preparation of surfaces complete all as specified and as directed.

M&L for preparation of wall/ ceiling surfaces and applying two coats of oil bound distemper over a coat of alkali resistance primer incl preparation of surface complete all as specified and as directed.

M&L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete all as specified and as directed.

S&F aluminium powder coated double leaf door on pivots alongwith hydraulic door closer, door lock, handles, 10mm thick glass fixed with rubber beading and glazing clips and using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved all as directed by Engineer-in-Charge

S&F aluminium powder coated partition using following sections of `Jindal Aluminum Ltd ' or equivalent specified herein after as approved with 12 mm thick both side prelaminated particle board interior grade of approved colour in bottom panel and 5mm thick plain glass in top panel fixed with aluminium clips, beads, rubber gaskets etc., centre to centre distance of vertical member shall not exceeding 1mtr and horizontal member shall not exceeding 1.10 mtr using following aluminum section as specified in Jindal Catalogue complete as directed fixing to stone masonary walls with & including 1st class teak wood plugs of size 20mmX20mm at an interval of 0.5m around the track including drilling holes complete all as specified and as directed.

Supply and fixing anodised aluminium grills, having mesh size 100 mm x 100 mm, made out of 6 mm wide, 3 mm thick aluminium flat section complete all as directed by the Engineer-in-Charge. (Make : Indalco, Jindal or equivalent).

Taking down carefully aluminium point wiring (light, fan, socket or power), complete, (fitting such as switches, ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor to match with existing surface etc.

M&L for point wiring any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed stranded cable 1100 volts grade, (FRLS) ISI-694 marked in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with mild steel sunken boxes with earth dolly duly concealed in wall, painted with two coats of anti corrosive paint over a coat of red oxide primer, internally, covered with plastic laminated sheet suitable for switches, including PVC insulated stranded copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly, complete all as specified for the following:-

One light/fan point controlled by one switch and regulator

Socket outlet, three pin, 5 Amp, independent

Socket outlet, three pin 5 Amps on the same board

Bell/Buzzer points controlled by one bell push.

All as per Item No. 69.00 above but, with stranded copper conductor 2.5 Sq.mm (nominal area), including PVC insulated stranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed.

S&F Ceiling rose, surface Bakelite suitable for 3 pin 230volt 50 Hz AC supply complete all as specified and as directed.

S&F Switch piano; flush type, single pole, one way, and 6Amp, 230 volt complete all as specified and as directed.

S&F Switch piano; flush type, single pole, one way and 15Amp, 230 volt complete all as specified and as directed.

S&F Bell push 6 amp 230 volt 50 HZ AC supply complete all as specified and as directed.

S&F Socket outlet multipurpose having provision for 3 pin, 6 Amp and 2 pin, 6 Amp, piano flush type complete all as specified and as directed.

S&F Socket outlet multipurpose having provision for 3 pin, 15 Amp and 3 pin, 5 Amp, piano flush type complete all as specified and as directed.

Taking down ceiling fan of any size/sweep after disconnecting the wire from existing ceiling rose and refixing the same after cleaning dust, oiling greasing etc including providing flexible three core from ceiling rose to connector of fan complete all as specified and as directed.

Supply and fix step fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

M&L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated cable with stranded copper conductor of size 04 Sq. mm nominal area and drawing, in PVC conduit including PVC insulated 2.5 Sqmm (nominal area) stranded copper conductor earth wire complete all as specified and as directed. [Note : - Two runs of 4 sqmm cable, one run of 2.5 sqmm cable and one run of PVC conduit will be measured as one unit]

Supply and fix bell electric Ding dong suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

M&L for taking down existing FTL rod 36/40 watt and supply and fix surface wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver for LED tube complete with retrofit LED energy saving recess/surface mounted luminaries, high efficiency diffuser for soft glare fee light of capacity 20 watt suitabe of operation on 230 volt 50 Hz AC supply complete all as specified and as directed by Engineer-in-charge. [Make Cat Part No ENDURALINEARNEOBS20WLED865SPCWH of Havells or equivalent model in Wipro/HPL/Philips as approved by GE

S&F in replacement of recess mounting LED 2x2 luminaries with white acrylic drop light dissipator white powder CRCA housing with LEDs plane front frame with white acrylic drop light dissipator fixed to housing concave acrylic diffuser enables lighting as per LG3 guidelines conforming to Cat part No. SM365C LED33-6500 PSU-OD GR of Phillips or of equivalent make in Wipro / Havells

Supply and fix lamp holder PVC insulated body with back plate suitable for batten complete for 230 volt 50 Hz AC supply complete all as specified and as directed.

S & F Sheet metal, 20 amp Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps,10 KA breaking capacity,'C' series,240 V complete all as specified and as directed.

S&F vertical 4 way TPN double door,recess mounted/wall mounted,MCCBs as incomer is 3 pole V-Tec of 100A rating & 16KA breaking capacity,MCCB is pre-fitted at factory & including price of MCCB complete all as directed and specified by Engineer in charge.

Supply and fixing DB 12 way SPN with 200 amps rated bus bar, double door complete all as specified and as directed.

Supply and fixing of MCB Single pole and neutral rated capacity 32 A, 240 V breaking capacity 9KA C series complete all as specified and as directed.

Supply and fixing of MCB Single pole rated capacity 5 to 32 A, 240 V breaking capacity 9KA C series complete all as specified and as directed.

M&L for Earthing complete with galvanized steel plate electrode 60 cm x 60 cm x 6 mm surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25 meter below ground level with top edge of the earth plate at a depth of not less than 1.50 meter below ground level connected to galvanized iron or steel earth wire, 4 mm dia (No. 8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron, earth wire protected by galvanized steel pipe 15 mm dia (Light grade) & connected to main switch or main control board all as shown in electrical plate No.3 of SSR-2009 Part I & including necessary excavation and earth work. The rate also include charcoal and salt in alternate layers 20 mm dia pipe (Light grade) for watering, protection pipe, funnel, wire mesh, PCC chamber in cement concrete (1:3:6) type C-I, 40 mm thick RCC (1:2:4) type B-1 cover and CI frame etc.

Anand Trading Co

M/S Sandeep Enterprises

REKHA ELECTRICALS

Agarwal Agencies

M/s.BAJRANG CONSTRUCTION

Mona Associates

Vijay Construction and Company