Loading
Loading…
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
New: tenders and results on WhatsApp
New: Find tenders, results and companies on WhatsApp, by text or voice note
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹67.6 L
EMD Value
₹68,000
Closing Date
11 Dec 2024, 10:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Krishna Bhagya Jala Nigam Limited
R S NAGASHETTI
Maintenance of Lawn beds, Flower beds, Shrubs, Ground covers Hedges,Murram path, including sweeping, protection, and water supply system etc, at Double road, Parking, Almatti circle, Almatti Camp, IB, Office, Nidagundi and Other gardens during 2024-25.(Reserved for ST Category)
KBJNL/2024-25/OW/WORK_INDENT1320
KBJNL/2024-25/OW/WORK_INDENT1320
Reserved
Other Works
Two Tender Document System(Two Cover)
KBJNL Division Forest Division Almatti
1.A valid copy of the Registration Certificate of Forest Division in any Forest Division or KPWD or CPWD Class-I and above Contractor Registration Certification or (Firm Registration Certificate with experience of Development and Maintenance of Soft landscape works of Gardens)
To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. 2019-2020 to 2023-2024)achieved in at least one financial years a minimum financial turnover (in all classes of civilengineering construction/Plantations works only)ofRs.67.59X1equal toRs. 67.59 Lakhs(APT (usually not less than one times the estimated annual payments under this contract) The Turnover certificate issued by registered chartered Accountants along with UDIN
2.Contractor should upload a valid copy of the S.T caste Certificate and domicile certificate. Conditions to ST reserved category works:a)ST Category contractors should upload a scanned copy of valid Caste Certificate issued from competent authority and should submit the hard copy of the Original /ST caste certificate for verification at the time opening of Cover-1b)ST Category contractors should be Domicile of State of Karnataka for more than 10 years and should upload a copy of Valid Domicile Certificate issued from competent authority and should submit the hard copy of the Original Domicile certificate for verification at the time opening of Cover-1c)If the bidder haves firm then all partners/members of the firm shall belongs to the, ST Category
3.The valid copy of the Labor license issued by Competent Authority. Note:-The work consists of providing man power for maintenance and hence minimum wages Act as per notification of labor department shall be strictly followed
4.The requisite Earnest Money Deposit through E-cash Only
5.The valid copy of Employment Provident Fund (EPF) registration certificate and recent remittance challans.
6.The valid copy of ESI Registration Certificate is mandatory.
The valid copy of G.S.T. Registration certificateNote: 1 (a) The Successful bidder shall furnish within 20 days from issue of Letter of Intent before entering into agreement (i) Copy of Income Tax returns filed mentioning PAN and TAN for the financial year 2023-24 (Assessment year 2024-25 and (ii) copy of the Adhaar/Voters ID with mobile no and address before entering into agreement, failing which the tender will be rejected and the bidder shall be liable for subsequent penal action including black listing. b) The amount put to tender is exclusive of GST and the tenderer should quote without GST. However GST will be paid at prevailing rate during billing. c) The increase in GST shall not be paid in extended period of contract for which the contractor alone is responsible for delay as determined by the authority while granting the extension of time.
To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. 2019-2020 to 2023-2024) B)Satisfactorily completed (at least 90% of the contract value), as prime contractor, at least any construction work such any work involving. of value not less than Rs. 16.89 Lakhs (25% of APT equal to 25% X 67.59 Lakhs) (usually not less than 50% estimated value of contract) The work done certificate should be issued by an officer CF/Executive Engineer of the concerned Division / Equivalent officer. The cost will be updated to the present value by giving weightage of 10% each year.
To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. 2019-2020 to 2023-2024) Executed in any one year, the following minimum quantities of work For unit no. work (i)0.5X984158 Equal to 492079 Sqm Quantity of Development/Maintenance of Gardens/Parks/Soft Landscaping works Or 49.20 Ha Raising and maintenance of Plantations works for the minimum period of 1 year period.
liquid assets and /or availability of credit facilities of no less than Rs.20.27 Lakhs (Loc equal to 67.59x30% (APT) (Credit lines/letter of credit/ certificates from banks for meeting the fund requirement etc.(usually the equivalent of the estimated cash flow for three months in the peak construction period)(Bankers certificate should be furnished in prescribed format enclosed to Govt Circular No.FD CMM/16/2022(P-2) Dtd.22.8.2022
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as underassessed available tender capacity ( AXNX5.0 - B )Where, A Maximum value of civil engineering works executed in any one year during the last five years (updated to 2024-25 price level) taking into account the completed as well as works in progressing Number of years prescribed for completion of the works for which tenders are invited Value, at 2024-25 price level, of existing commitments and on-going works to be completed during the next 0.58 years (period of completion of the works for which Tenders are invited)Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an DEPUTY CONSERVATOR FORESTS or equivalent
₹1,690
₹68,000
3 Dec 2024
3 Dec 2024
13 Dec 2024
7 Dec 2024
Maintenance of Lawn beds, Flower beds, Shrubs, Ground covers Hedges,Murram path, including sweeping, protection, and water supply system etc, at Double road, Parking, Almatti circle, Almatti Camp, IB, Office, Nidagundi and Other gardens during 2024-25.
Work to be Under Taken During Maintenance of garden (i)Watering: the plants and lawns in the garden should be watered frequently as required looking to the climate, soil and plant conditions. If Spri...
Supplying of Experienced Man Power of Watchman with uniform and with necessary tools (Torches, Whistles etc) and equipments for watch and ward and protection of the gardens. (2 Nos X 365 Days) etc. ...
Maintenance of Pumps:-Rewinding of submergible pumpset with copper winding wires of appropriate guage, as per specifications and / or directions of the departmental officials, including all materials,...
Maintenance of Pump. Rewinding of monoblock motor with copper insulaton wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with guarantee period...
Rewinding of monoblock motor with copper insulation wire suitable gauge as per ISI specification with all necessary materials and labour,tools and equipments with uarantee period of not less than 12 ...
Maintenance of Pump. The Transportation of pumping machinerie etc,complete with all lead and lift as directed by officer in charge.
Maintenance of Pump. The lifting of submergible pumpset from well etc,complete with all lead and lift as directed by officer in charge.
Maintenance of Pump. The Re-errection charges of pumping machineries including overhauling
and painting etc,complete with all lead and lift as directed by officer in charge.
Maintenance of Pumps:- For 25 HP/ 4 stage submersible pumps. a) Replacement of Neck ring. etc,complete with all lead and lift as directed by officer in charge.
Maintenance of Pumps:- For 25 HP/ 4 stage submersible pumps. b) Replacement of Steel bush. etc,complete with all lead and lift as directed by officer in charge.
Maintenance of Pumps:- For 25 HP/ 4 stage submersible pumps. c) Replacement of Rubber Bush. etc,complete with all lead and lift as directed by officer in charge.
Maintenance of Pumps:- For 25 HP/ 4 stage submersible pumps. d) Welding and turning of Impellers . etc,complete with all lead and lift as directed by officer in charge.
Maintenance of Pumps:-For 25 HP/ 4 stage submersible pumps. e) Pump fitting charges. etc,complete with all lead and lift as directed by officer in charge.
Maintenance of Pumps:- For 10 HP/ 4 stage submersible pumps. a) Replacement of neck ring. etc,complete with all lead and lift as directed by officer in charge.
Maintenance of Pumps:- For 10 HP/ 4 stage submersible pumps. a) Replacement of Steel bush.. etc,complete with all lead and lift as directed by officer in charge.
Maintenance of Pumps:- For 10 HP/ 4 stage submersible pumps. c) Replacement of Rubber Bush. etc,complete with all lead and lift as directed by officer in charge.
Maintenance of Pumps:- For 10 HP/ 4 stage submersible pumps. d) Welding and turning of Impellers . etc,complete with all lead and lift as directed by officer in charge.
Maintenance of Pumps:- For 10 HP/ 4 stage submersible pumps. e) Pump fitting charges. etc,complete with all lead and lift as directed by officer in charge.
Maintenance of Pumps:- For 10 HP Monoblock pumps. a) Replacement of Steel Bush. etc,complete with all lead and lift as directed by officer in charge.
Maintenance of Pumps:- For 10 HP Monoblock pumps. b) Replacement of Bearing of Rotor shaft. etc,complete with all lead and lift as directed by officer in charge.
Maintenance of Pumps:- For 10 HP Monoblock pumps. c)Rotor shaft welding and turning. etc,complete with all lead and lift as directed by officer in charge.
Maintenance of Pumps:- For 10 HP Monoblock pumps. d) Fitting charges. etc,complete with all lead and lift as directed by officer in charge.
Maintenance of Pumps:- For 5 HP Monoblock pumps. a) Replacement of Steel Bush. etc,complete with all lead and lift as directed by officer in charge.
Maintenance of Pumps:- For 5 HP Monoblock pumps. b) Replacement of Bearing of Rotor shaft. etc,complete with all lead and lift as directed by officer in charge.
Maintenance of Pumps:- For 5 HP Monoblock pumps. c)Rotor shaft welding and turning. etc,complete with all lead and lift as directed by officer in charge.
Maintenance of Pumps:- For 5 HP Monoblock pumps. d) Fitting charges. etc,complete with all lead and lift as directed by officer in charge.
Repairing of Starters for 25 HP Submersible Motor B)Starter Coil etc,complete with all lead and lift as directed by officer in charge.
Repairing of Starters for 10 HP Submersible / Monoblock Motor A)Starter Timer etc,complete with all lead and lift as directed by officer in charge.
Repairing of Starters for 10 HP Submersible / Monoblock Motor B)Starter Coil etc,complete with all lead and lift as directed by officer in charge.
Repairing of Starters for 5 HP Monoblock Motor A)Starter Timer etc,complete with all lead and lift as directed by officer in charge.
Repairing of Starters for 5 HP Monoblock Motor B)Starter Coil etc,complete with all lead and lift as directed by officer in charge.
Maintenance of Mechanical Irrigation System. Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to li...
Maintenance of Mechanical Irrigation System. Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to li...
Maintenance of Mechanical Irrigation System. Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to lin...
Maintenance of Mechanical Irrigation System. Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to li...
PVC fittings & accessories Supply and delivery at site special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments, 110 mm...
PVC fittings & accessories Supply and delivery at site special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments, 90 mm e...
PVC fittings & accessories Supply and delivery at site special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments, 75 mm ...
PVC fittings & accessories Supply and delivery at site special moulded variety PVC couplers as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark and with its latest amendments 63 mm et...
PVC fittings & accessories Supply and delivery at site special moulded variety PVC Tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendment, 110 mm dia PVC Te...
PVC fittings & accessories Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendment, 90 mm dia PVC Te ...
PVC fittings & accessories Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendment 75 mm dia PVC Tee ...
PVC fittings & accessories Supply and delivery at site special moulded variety PVC tee as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendment 63 mm dia PVC Tee ...
PVC fittings & accessories Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments, 110 mm dia PV...
PVC fittings & accessories Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 90 mm dia PVC ...
PVC fittings & accessories Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 75 mm dia PVC ...
PVC fittings & accessories Supply and delivery at site special moulded variety PVC elbows as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 63 mm dia PVC ...
PVC fittings & accessories Supply and delivery at site special moulded variety PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments, 110 mm dia P...
PVC fittings & accessories Supply and delivery at site special moulded variety PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments, 90 mm dia PV...
PVC fittings & accessories Supply and delivery at site special moulded variety PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments, 75 mm dia PV...
PVC fittings & accessories Supply and delivery at site special moulded variety PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments, 63 mm dia P...
PVC fittings & accessories Supply and delivery at site special moulded variety PVC service saddles as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendment, 110 ...
PVC fittings & accessories Supply and delivery at site special moulded variety PVC service saddles as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendment, 90 m...
PVC fittings & accessories Supply and delivery at site special moulded variety PVC service saddles as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendment, 75 m...
PVC fittings & accessories Supply and delivery at site special moulded variety PVC service saddles as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendment, 63 m...
Supplying and installing 1" GI raiser with tripoid stand (1 mtr Hieght) etc,complete with all lead and lift as directed by officer in charge.
Supplying and installing Jain make or any other equivalent ISI make Impact sprinklers. etc,complete with all lead and lift as directed by officer in charge.
Supplying and installing of ISI make 1" gun metal ball valve etc,complete with all lead and lift as directed by officer in charge.
Supplying and installing of ISI make 3/4" gun metal ball valve. etc,complete with all lead and lift as directed by officer in charge.
Supplying and installing of ISI make Hose pipes ( Garden Pipe) of 30 mtr Length (i)1" Hose pipe etc,complete with all lead and lift as directed by officer in charge.
Supplying and installing of ISI make Hose pipes ( Garden Pipe) of 30 mtr Length (ii) 3/4" Hose pipe etc,complete with all lead and lift as directed by officer in charge.
Supplying and installing of Jain/Supreme make 75mm Ball valve etc,complete with all lead and lift as directed by officer in charge.
Replacement of damaged Hunter make Rotor Pop-up Sprinklers with radius of 12-15 Mtrs etc,complete with all lead and lift as directed by officer in charge.
Supplying and installing of 3/4" ISI make G.I. Groove Bend etc,complete with all lead and lift as directed by officer in charge.
Supplying and installing of 110 mm Jain/Finolex make RR couplers etc,complete with all lead and lift as directed by officer in charge.
Supplying and installing of 75 mm Jain/Finolex make RR couplers etc,complete with all lead and lift as directed by officer in charge.
Supplying of solvent (Solution) etc,complete with all lead and lift as directed by officer in charge.
Supplying and installing of 75 mm Jain/Finolex make End cap etc,complete with all lead and lift as directed by officer in charge.
Supplying and installing of 63 mm Jain/Finolex make End cap etc,complete with all lead and lift as directed by officer in charge.
Supplying and installing of 4" HDPE Connector etc,complete with all lead and lift as directed by officer in charge.
Supplying and installing of 4" HDPE pipe Clamps etc,complete with all lead and lift as directed by officer in charge.
Supplying and installing of 3" Foot valve etc,complete with all lead and lift as directed by officer in charge.
Supply and installing of Jain make or any other equivalent Drippers. etc,complete with all lead and lift as directed by officer in charge.
Supply and installing of 16 mm in line LLDPE pipe of Jain make with necessary fittings etc,complete with all lead and lift as directed by officer in charge.
Providing :laying and jointing HDPE Pipes of Specifed grade and Conformation to IS 4984 -2016 With laset ammendnts and vConveying to work site including loading and unloading at both destinations an...
Supply and installing of 10 Sqmm 3 Core V Guard/CRI/L& T/Finolex Copper cable for 25HP Submersible Motor at ALBC Jackwell for Nidagundi garden. etc,complete with all lead and lift as directed by offic...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
ALMATTI PUMP TO DAM CIRCLE DUBLE ROAD-Model.pdf
Others - D-1 • 2.14 MB
OTHER GARDEN FULL DWG-7-Model.pdf
Others - D-7 • 3.75 MB
OTHER GARDEN Maintenance 2024-25 kw 3 indent no 1320.docx
Tender Document • 17.33 MB
MODIFIED NIDAGUNDI GARDEN NEW 2020-Model.pdf 08-01-2020.pdf
Others - D-13 • 5.23 MB
post office garden-Model.pdf
Others - D-8 • 0.25 MB
Water Tank Garden-Model.pdf
Others - D-12 • 1.44 MB
KBJNL MD HOME TO SE HOME AREA-Model.pdf
Others - D-5 • 0.89 MB
Community Hall Almatti-Model.pdf
Others - D-2 • 0.28 MB
RAMLINGESHWAR TEMPLE GARDEN-Model.pdf
Others - D-10 • 0.42 MB
DAM SLOPE AREA GARDEN-FINAL-Model.pdf
Others - D-3 • 0.62 MB
navodaya f type neww-Model.pdf
Others - D-6 • 0.23 MB
KBJNL IB TO MD HOUSE AREA-Model.pdf
Others - D-4 • 0.86 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .