48/2020-21/EUDC-I/GZB

Amount

Carriage of ST Pole 11 Mtr. Long from Central store GZB/Sahibabad/JE store store (Dist.) to site of work including loading unloading of both ends.

Carriage of other line material (Other than pole) as conductor, pin & Disc insulator, MS Channel, angle, Iron stay Rod & Wire etc. from Central store GZB/Sahibabd/JE store (Dist.) to site of work including loading unloading of both ends

Excavation of foundation pit in mix soil/Normal Soil/Soft and Hard Rock and its back filling and leveling etc. erection of sigle support and constrction of Double Pole with ST Pole 11 Mtr. Long Including fixing of all accessories and fabrication as required after digging of a suitable size pit for each pole. Work shall be done as per RESPO specification.

Grouting about ST Pole 11 Mtr. Long of support up to ground level including back filling and proper dressing shall be done as per RESPO specification.

Fabrication of M S Top Channel, M S Dropper Channel, T-off Channel & M S angle etc. including cutting & holes as per RESPO drawing and norms.

Earthing of supports with M. S. Earth Rod 20x2500 mm long including excavation of pit and driving of M.S. Rod 1 Mtr. Apart from support 0.5m Mtr. Below ground level and connectiong with support with the help G.I wire No.6 SWG.

Binding, Sagging and Jumpring etc. of ACSR Weasel conductor on the pole as per RESPO specification and as per direction of engineer in charge it includes cost of labor, T&P carrier etc. prepared for proper completion of work.

Construction of plinth of around pole of size 45 mm dia 300mm high above ground level in cc 1:3:6 Complete with all material & shuttering etc. shall be done as per RESPO specification.

Dismantling & Shifting of 11KV 63 & 250 KVA Transformer from Existing TF Plinth inclusding all related work as per instruction of Engineer In charge.

Providing, Testing and commissioning of Mantenance free multifaceted proactive and corrosion free chemical earthing electrode complete with backfill compound with all required GI Strip as per instruction of Engineer In charge.

Making of Plinth (Chair) 11/0.433 KV Transformers with providing all Channels, Angle, Nutt-Bolts & other required materials. Its included the cost of all Channels, Angle, Nutt-Bolts & othere required materials etc./Construction of T/F Plinth with cement, concrete, sand and bricks dully plaster around the plinth. Complete work in all respect as per RESPO norms.

Erection of guarding angle cross arm and other requisite material with guarding by GI wire and providing loops at suitable distance as per RESPO drawing and norms.

Removal of old and used ST Pole off Size with complete accessories as per instruction of Engineer In charge.

Removal of old and damaged conductor after opening from insulator and bundling the same.

Carriage & loading unloading of both ends old and used ST Pole off Size from work site to JE (Dist.) store.

Carriage & loading unloading of both ends scrap conductor & other scrap material from work site to JE (Dist.) store.

Providing & Fixing of MS holding clamps for ST Pole made form 50 x 6mm MS flat.

Providing & Fixing of MS LT pin clamps for ST Pole made form 50 x 6mm MS Flat.

Providing & Fixing of Shackle insulators of best quality.

OM SAI ELECTRICALS CO.

Vashu Enterprises