Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.7 LAccepted-AOC | L1 | Accepted-AOC REASONABLE | |
| 2 | L2₹23.7 L+₹1.2 L (5.27%)Rejected-Finance | L2 | Rejected-Finance HIGH RATE | |
| 3 | L3₹28.9 L+₹6.4 L (28.7%)Rejected-Finance | L3 | Rejected-Finance HIGH RATE | |
| 4 | L4₹35.3 L+₹12.8 L (57.1%)Rejected-Finance FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L4 | Rejected-Finance HIGH RATE |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
23 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SHRI PRAVEEN KUMAR, IDSE
GE KHADAKWASLA, NDA KHADAKWASLA, PUNE-23
REPAIR AND MAINT AND UPKEEP OF WATER SUPPLY INSTALLATION UNDER ZONE C AREA AT NDA KHADAKWASLA
2023_MES_606875_2
8737/E8
Open Tender
Civil Works
Item Rate
180 days
GE KHADAKWASLA
AS PER TENDER DOCUMENT
9 documents required · 9 mandatory
₹500
GE KHADAKWASLA
₹90,000
Yes
25 Sept 2023
3 Aug 2023
25 Aug 2023
3 Aug 2023
23 Aug 2023
11 Aug 2023
3 Aug 2023 - 10 Aug 2023
Amount
Taking down of existing tarfelt and cement plaster of any description and thickness on roof top including flashing and junction of parapet and cleaning existing roof top surface by brooming , wire brushing including removing the debrish out complete all as specified and directed
Demolition of roofs, any thickness including plastering & leeping (whether full or part) removal of debris at a distance exc 250m but not exc 500m and depositing where directed
Demolition Concrete of any description and in any position not otherwise specifically provided for complete all as directed.
M&L for cement concrete Type B0 (1:2:4) (12.5mm size graded stone aggregate ) as in roof padding complete all as specified and directed.
M&L for 20mm thick rendering on concrete surface on roof in cement plaster 1:4 finished even and fair without using extra cement by using Dr. fixit @ 3% of wt of cement content complete all as specified and directed. Note: Water proofing Compound measured and paid seprately
Supply only water proofing compound all as directed
M&L for cutting grooves in brick / stone wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.
M&L For preparing plastered surfaces,with approved bituminous primer @100 gms/sqm and applying water proofing treatment on wall,roof,chajja's,gabble walls, edges (at any respective height of bldg )etc and stick with non-woven polyster matt modified APP Membrane 3mm thick as reinforcement weighing not less than 3.5 Kg/sqm and applying one coat of aluminium paint on top of the membrane (at any height ) complete all as specified and directed
M&L for providing cement concrete PCC (1:2:4) type B1 (20mm size graded stone aggregate) as in coping to parapet wall/kerbs in roof with projection of 50mm from the outer surface with a groove of 12 mm x 12mm as drip course in bottom side including necessary form work etc complete all as specified and as directed
Dismantling of single layer of manglore/ Similar pattern tiles in roofing complete all as directed.
Dismantling of battens of tiles of any size and description spaced exc 15 cm, including tiling fillets complete all as directed.
Dismantling of unframed wk timber scantlings 40 sq. cm and over in section, in any position complete all as directed.
Ditto as per item No.12 above in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as directed.
S&F Galvanised corrugated mild steel sheeting 0.63mm thick with two corrugations side lap, fixed with 'L' type or 'J' type of cranked hook in lieu of screws and washers in roofs, walls etc with grade of zinc coating 275 complete all as specified and directed.
S&F Galvanised plain mild steel sheeting 0.63mm thick in Ridge, hips, valley gutter, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.
S&F pre painted galvalume aluminium zinc coating GI based corrugatedsteel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering /cladding to wall fixed with L hooks or J types or cranked bolts complete all as specified and as directed Note: Work to be executein any respective height of building and quoted rate shall deemed to be included for the same
M&L for wrought 2nd class hard-wood in scantlings in repairs, to replace old and decayed timber (including piecing, scarfing, etc., of old and new timbers if required) and removing defective portions to store complete all as specified and directed.
M&L for clean sawn ,2nd class H/W tile battens at 30cm centres, exe 5 and n.exe 15 sqcm sectional area complete all as specified and directed.
Ditto all as per item No. 19 above but except battens
M&L for preparing tile battens of any size and spacing and treated all over (measured overall on one side only spaces not deducted) with two coats of cresoting oil etc specified and directed
M&L for providing roof tiles Manglore pattern interlocking at side joints, laid dry (at any height of bldg), complete all as specified and directed.
Ditto all as per item No. 22 above but except tiles
M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in CM (1:6) complete all as specified and directed.
Ditto all as item No. 24 above, but except tiles
S&F in repairs eaves boards clean sawn in roof 20mm thick complete all as specified and directed.
M&L for preparation of new wooden surfaces and painting two coats of Synthetic Enamel paint over a coat of pink primer complete all as specified and directed.
Taking up or down 15 mm steel tubing and connections including cleaning for refixing complete all as directed.
Taking up or down 20 mm steel tubing and connections including cleaning for refixing complete all as directed.
M&L for 15mm bore, medium grade, GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors and cutting holes n exc 100 sqcm superficial area chase,pinning in making good to facings where required in pointing in cement mortar (1:3) for concealed water tubing complete all as specified and directed.
M&L for 20mm bore, medium grade, GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors and cutting holes n exc 100 sqcm superficial area chase,pinning in making good to facings where required in pointing in cement mortar (1:3) for concealed water tubing complete all as specified and directed.
Dismantling of existing water tanks Exc 250 not Exc 500 and removing to store complete all as directed.
Ditto all as per above item No32 above but but exc 500 Ltr n. Exc 1000 Ltr capacity complete all as directed..
S&F Three layered Rotational moulded polyethylene water storage 500 litres tank (cylindrical vertical with closed top) hoisted and fixed in position and Including 20 mm dia stop cock cast copper alloy and 20 mm dia PTMT float valves complete all as specified in SSR part I and as directed
S&F Three layered Rotational moulded polyethylene water storage 1000 litres tank (cylindrical vertical with closed top) hoisted and fixed in position and Including 20 mm dia stop cock cast copper alloy and 20 mm dia PTMT float valves complete all as specified in SSR part I and as directed
S&F in repair Ball valves 15mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) including taking down old one complete all as specified and directed.
Ditto all as per Item No. 36 above but 20mm dia
S&F in repairs Bib taps 15mm dia, chromium plated ,fancy type ,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed including taking down old one complete all as specified and directed.
S&F in repairs Stop valves 15mm dia, chromium plated ,fancy type, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed including dismantling of old one complete all as specified and directed
Dismantling floor or wall tiling of any description and size including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc including cleaning off premises where directed
Taking down cement plaster on brick or stone walls etc including raking out joints,hacking for key ,scrubbing down with water etc complete all as directed.
Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including cleaning off premises where directed
Taking down chowkhats or frame not exc 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as directed.
Taking down chowkhats or frame exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as directed.
M&L for Joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but n exc 0.18 Sqm (400x400x7 to 8 mm thick) as in flooring etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile laid over & including 15 mm thick screed bed cement mortar (1:6) complete all as spcified and directed.
M&L for Joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but n exc 0.18 Sq (400x400x7 to 8 mm thick) as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile laid over 10mm thick rendering in CM (1:4) complete all as spcified and directed.
M&L for coloured Glazed ceramic tiles as in vertical surface of Size 350x 250 x7mm /450x350x7 mm set and jointed in neat cement slurry laid over 10 mm thick cement rendering in cement mortar 1:4. and pointed in white or colour cement to match the tile complete all as specified and directed.
M & L for machine cut superior quality Kota stone slab flooring 20-25 mm thick over cement screed , laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete match including bull nosed to edges complete and incl 20 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed
M&L for removing loose, disturbed or disintegrated old concrete surfaces of RCC beam, column, lintel, pardi, railing etc, cleaning thoroughly exposed reinforcement, by sand blasting using suitable pump as directed by the GE, preparing exposed concrete surfaces to receive guniting, applying one coat of anti corrosive paint to the exposed reinforcement, supply and fix welded wire mesh of size 100 x 100 mm of 3 mm dia wire, weight not less than 1.37 Kg/Sqm & binding with 22 guage mild steel (annealed) binding wire to reinforcement and applying pressure guniting in cement mortar (1:3), average 30mm to 50mm thickness and thereafter rendering 10 mm thick plaster in cement mortar (1:3), mixed with water proofing compound @ 2% by weight of cement and finishing the surfaces even and smooth without using extra cement to match with the existing surfaces, removing the debris outside MD land including material and labour for necessary scaffolding and safety arrangement for guniting work, complete all as specified and directed. (Note :- The finish of the surfaces to be matched with the existing surface. WPC shall be measured & paid separately as supply only).
M & L for cement concrete (1:3:6) type C2 (Using 20mm graded stone aggregate) in plinth protection, 75 mm thick, finished even and smooth without using extra cement, including making joints 12 mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen 85/25 and sand in the proportion of (1:3 ) by weight complete all as specified and directed.
S&F 35 mm thick factory made plain framed, panelled shutters with 2nd class hard wood rails and panel of 9mm BWP commercial ply 12mm thick veneered particle board with commercial veneers on both faces.The size of rail or style shall be as per IS 1003 Part-I Kiln seasoned and chemically pressure treated complete all as specified and directed
S&F 35 mm thick second class hardwood factory made glazed and skelton shutters open rebated and prepare to receive glass/ guage (with sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass/guage etc size of member etc size members of shutters as specified in SSR part I Section-8 clauses 8.24(b) supplied and fited to chowkhat made out of 2nd class hard wood, 35mm thick and styles 75mm wide complete .
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supply and fixing in opening as per the specification and drawing
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with hit moulded plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the tiles and rail with suitable PVC sheet bedding and joined together with solvent cement, supplying and fixing in the frame at site as per specificaton & drawing and as directed.
S&F second class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed incl cutting holes and hold fasts fixing (split at one end) complete all as specified and directed.
S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples , complete all as specified and directed.
S&F butt hinges cold rolled mild steel 100mm long medium weight complete all as specified and directed.
S&F extruded anodised aluminum alloy handle 125mm long fabricated type .complete all as specified and directed.
S&F anodised aluminum barrel tower bolt of extruded section 150mm long. complete all as specified and directed.
S&F aluminum alloy sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheets, cast of exctruded sections and fixing bolts of extruded section and all as specified complete all as specified and directed.
S&F 100mm Aluminium handles, cast type, anodised complete all as specified and directed.
S&F 75mm butt hinges cold rolled mild steel medium weight and fixed complete all as specified and directed.
S&F Aluminium anodised barrel tower bolts of extruded section 75mm long complete all as specified and directed.
S &F 30 mm thick Flush shutters ,solid core construction , with particle board core and plywood face panels , commercial type on both sides complete all as specified and directed.
M&L for second class hard wood glazed and skeleton shutter 30mm thick, factory made, open rebated and prepared to receive glass/gauge etc, sash bars, mitred and rebated, with edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of stiles, rails etc as specified in section 8, clause 8.24 (b) of SSR part-I(2009)complete all as specified and directed.
M&L for preparation of new or previously untreated wooden surfaces of any description ,not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for 15 mm thick cement plaster on brick or concrete surface in cement mortar1:6 included finishing surface even and smooth without using extra cement on walls etccomplete all as specified and directed.
M&L for 10mm thick cement plaster on concrete surface in cement mortar (1:3) included finishing surface even and smooth without using extra cement on ceiling etc complete all as specified and directed
M&L for 15 mm thick cement plaster on brick or concrete surface in cement mortar1:4 included finishing surface even and smooth without using extra cement on walls etc complete all as specified and directed
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of alkali registant priming paint using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.
Ditto all as per item No 71 above here-in-before but in ceiling etc complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint white or tinted including scaffolding arrangement, trestles, ladders etc complete all as specified and directed.
Demolition of brick / block masonry / Stone masonry built in Cement mortar complete all as specified and directed.
M&L for precast cement concrete (1:3:6) type C-1 ( using 20mm size graded stone aggregate ) block masonry with solid blocks exc10 cm thick in width and setting in cement mortar 1:6 complete in wall complete all as specified and directed.
M&L for Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and directed.
M&L for flush pointing to random or polygonal rubble, uncoursed on brought upto courses in cement mortar (1:4) complete all as specified and directed.
Raking out joints/pointing to squared rubble masonry, coursed or uncoursed built in cement mortar complete all as specified and directed.
M & L for 75 mm thick cement concrete (1:4:8) type D-2 (Using 40 mm size graded crushed stone aggregate) as in floor etc complete all as specified and directed.
M&L for glossy finish machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment to match complete, all as specified and directed
M&L for sand layer under floor of interlocking paver tiles incl watering and consolidation complete all as specified and directed.
M&L for glossy finish Chequered cement concrete tiles 30 cm x 30 cm x 25mm thick, set, jointed and pointed in neat cemeant slurry in floors with grey cement and pigment in floor over 20mm screed bed in cement mortar (1:6) complete all as specified and directed.
M&L for 100 mm thick cement concrete (1:2:4), type B-1 (Using 20 mm size graded crushed stone aggregate) as in hard standing complete all as specified and directed.
M&L for forming expansion joints 100 mm deep x 12 mm wide filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, grade A complete all as specified and directed.
M&L for preparation of old painted surfaces of wall by completely removing existing treatment by scrapping , cleaning , washing with water etc , and applying Two coats of oil bond distember including filing the surface with crack filler wherever required complete all as specified and directed. Note :- (i) The coulour scheme of the painting will be as decided by the accepting officer (ii) work tobe execute under occupation conditions.
M&L for preparation of old painted surfaces of ceiling by completely removing existing treatment by scrapping , cleaning , washing with water etc , and applying Two coats of oil bond distember including filing the surface with crack filler wherever required complete all as specified and directed . Note :- work tobe execute under occupation conditions.
M&L for Non-Shrink-Polymeric waterproof grouting compound mixed with neat cement slurry (mixing of ratio as per manufacturers instruction) be injected through the nozzles under pressure not exc 2Kg/Sqcm to ensure that the grouts runs through all pores and cracks in the concrete there by sealing them after injections is over the nozzles be sealed off with CICO Supaplast and applying two coats of a polymer modified cementitious slurry upto 300mm from vertical and horizontal edges of crack (such as Tape-Crete or equivalent) be applied over the surface of walls/floors.Cracks to be cleaned and removing loose old concrete surfaces filled with filler material before epoxy grouting etc all as per manufacturers instructions and specification and as directed. Note :- (i) Work to be excuted in patches at deteriorated portion, The rate quoted inclusive of work in patch manner (ii) Work to be excuted for water retaining structure (i.e.,Water Filtration bed, Underground sump for ground floor and over head tank (OHT) height upto 30.00 mtre etc. (iii) The part of the work to be executed in OHT upto heights 30 mtr and necessary scoffolding and safety equipment for the same shall be deemed to be included in the quote rate by the contractor.
M&L for Preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion by demolation of cement concrete or any type of work complete all as specified and directed.
S & F for angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire etc. including all necessary drilling, bolting or riveting etc. conforming to Fe 290 Gde E-165, complete all as specified and directed
M&L for cement concrete (1:4:8), type D-2 (Using 40mm size graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.
Dismantling security fencing wire any type (babed wire, chain link fencing, GI mesh etc) complete all as specified and directed
Supply only Chain link MS galvanised fencing conforming to IS 2721: 2003 including line wires of 3.15mm dia straining bolts, etc including provision of binding wire complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.
S&F Mild steel screw or bolts (machine made) with hexoganal or square heads at one and screwed the other, or screwed both ends each screwed end to be filled with washers and hexogonal or square nut ,not exceeding 5cm long and diameter of neck 5 to 10mm complete all as specified and directed.
S&F mild steel straps including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 conforming to FE-290 Gde- 165 ,complete all as specified and directed.
M&L for mild steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for columns hooking ends and binding with and including mild steel wire annealed not less tan 0.9 mm dia or securing with clips quality conforming to round barsconfirming Fe-410-W(Gde.E-250), complete all as specified and as directed
S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.
Hacking out old broken glass(any thickness, size, quality or discription) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads complete all as specified and directed.
S&F Sheet glass 3 mm thick ordinary quality and glazing with oil putty incl wooden beads supply & fixing in square n exc 0.5 sqm in each pane complete all as specified and directed.
S &F in repairs Steel rolling shutters, 1.25 mm thickness of lath, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated,complete: push pull or manual type complete all as specified and directed.
M/S JEELANI ELECTRICALS
Pranjal Associates
Sunil Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .