8136/2022-23/E8 PROVN OF HARDSTANDING WITH PAVER BLOCK FOR VEH PARKING NEAR HELIPAD AND CSD, MAIN GATE WITH ARCH AND PILLARS , THREE 400 KVA GEN SHED AND COVERED SHELTER WITH HARDSTANDING FOR MT SEC AT HQ UNIFORM FORCE AT KIARI UNDER GE 860 EWS

Amount

Surface dressing n. exc 15cm deep in hard/dense soil complete all as specified.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified & directed.

M & L plinth protection 75 mm thick in PCC 1:3:6 type C-1 ( using 20 mm graded crushed stone aggregate ) laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site.

M& L for cement concrete 100mm thick 1:4:8 type D-2 using 40mm graded crushed stone aggregate over rammed earth as in sub base to receive floor finish etc complete all as specified.

M& L for cement concrete 150mm thick 1:4:8 type D-2 using 40mm graded crushed stone aggregate over rammed earth as in sub base to receive floor finish etc complete all as specified.

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified.

M&L for Machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment complete all as specified.

M & L for Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges type B1 1:2:4 (20mm graded crushed stone aggregate) complete all as specified.

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m depth and n.exc 10 Sqm on plan and getting out in any kind of soil complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (Nominal mix) using 40mm graded crushed stone aggregate as in foundation filling and similar work complete all as specified.

M&L Precast cement concrete block masonry type C1 1:3:6 (20mm graded crushed stone aggregate) with solid blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified.

Returning filling in incl spreading, watering and well ramming in layer n.exc 25 cm in layers complete all as specified.

Removing excavated material to a distance n.exc 50m and depositing where directed at a level n.exc 1.50 m above the starting point complete all as specified.

M&L for rendering 15mm thick, in cement mortar 1:4 on PCC block walling or concrete surfaces and finished even and fair without using extra cement complete.

M&L for two coats of cement base paint over a coat of white wash on walls after preparation of new-plastered surface complete, all as specified and directed.

M&L for reinforced cement concrete M-30 (Design Mix) using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for reinforced cement concrete M-30 (Design Mix) using 20mm graded crushed stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and as directed.

M&L form work to sides of concrete foundations, footings, bases of columns raft and beams sides and soffits(if any) of foundations and plinth,beams and similar work,vertical or to batter,for rough finished flat surfaces of concrete complete all as specified and as directed.

M&L form work to sides of pillars, posts, struts, piers, columns and stanchions, for square, rectangular or poygonal, rough finished surfaces of concrete complete all as specified and as directed.

M &L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

M&L mild steel TMT bars 5mm and over upto 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

M&L for coloured Glazed ceramic tiles in vertical surface 450X350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface including screed bed 10 mm thick in cement mortar 1:6 all as specified and directed .

S & F Mild steel flat iron of size 25 x 3mm as in hold fast conforming to Fe 410-O or Fe -310-O all as specified and directed .

M&L for rendering 10 mm thick, in cement mortar 1:6 on PCC block walling or concrete surfaces and finished even and smooth without using extra cement complete all as specified.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces

S & F Steel gate ornamental with cladding Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work (conforming to Fe.290.Gde-E-165) complete all as specified and as directed by Engr-in-charge.

S & F stainless steel letters of grade 304 bright polished , 450 mm height, 32 mm width and 32mm depth made out of 0.63 mm thick stainless steel sheet with seamless welding , rubbed , polished and edges made smooth including necessary fixing arrangement complete all as specified and as directed by Engr-in-charge.

Excavation in post holes (or similar holes) each not exceeding 0.5 cum in hard/dense soil getting out, returning filling and ramming earth or broken rubbles mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to distance not exceeding 50 metre and making good surface complete all as specified and directed.

M&L for rendering 15 mm thick, in cement mortar 1:6 on PCC block walling or concrete surfaces and finished even and smooth without using extra cement complete all as specified.

M&L for PCC (1:3:6) type C1 using 20 mm graded crushed stone aggregate as in coping including necessary form work complete all as specified and directed.

M&L for cement concrete 75mm thick 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) over rammed earth as in sub base to receive floor finish etc complete all as specified.

M&L for 40mm thick Cement concrete type B-1, 1:2:4 (using 20mm graded crushed stone aggregate) as top layer finishing cement concrete surface even and smooth using extra cement as specified and directed.

M &L Cement Concrete Type-B1 (1:2:4) (using 20mm graded crushed stone aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or indication but welded tubes conforming to IS 116-1979 grade St -240 and including steel is painted one shop coat of zinc chromate primer paint complete all as specified and as directed by Engr-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in ridge of roof covering/cladding to wall fixed with self-tapping screws complete all as specified.

S&F FI 40 x 6 mm thick as in fixing of Roof sheet as wind tie including securing bolts all as specified and directed.

M&L for two coat of synthetic enamel paint over a coat of priming with red oxide, zinc chrome of new or previously untreated surfaces of steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described complete all as specified and directed by Engr in Charge.

Supply and laying XLPE insulated armoured heavy duty electric cable with aluminium conductor (Stranded) 1100V grade cross-sectional area 10 Sqmm 2 core laid in trenches or passing through pipe or fixed on pole etc complete all as specified and directed by Engr-in-Charge

M&L for un-reinforced pre-cast concrete cable covers, class LV type-1, flat size 250mm x 150mm x 40 mm thick complete all as specified and directed by Engineer-in-Charge

M&L for sand cushioning to under ground electric cable complete all as specified and directed by Engineer-in-Charge

M&L point wiring complete for one light / bell / fan point controlled by one no, 1-way, 5 Amps switch. with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through & PVC casing and capping of 25 mm and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings / junction boxes / inspection covers etc, with and incl concealed MS sunken box of suitable size flush with wall surface, covered with & incl 3 mm thick bakelite, laminated hylem sheet / Gang box for top cover suitable for fixing of piano type switches / sockets etc, complete all as specified and directed for the following :- (Note : The cost of MS sunken box with 3 mm thick bakelite, laminated hylem sheet top cover is deemed to be included in quoted rate.)

All as per Srl item no. 42 here-in-before but one 3 Pin socket outlet, 5 Amp on independent board

All as per Srl item no. 42 here-in-before but one 3 Pin socket outlet, 5 Amp on same board.

All as per serial item No. 42 here-in-before, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm FRLS PVC copper conductor (Multi-stranded) insulated and unsheathed electric cable 1100 volts (ISI Marked) including FRLS PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common dolly.

S&F switch piano flush button single pole one way 5 Amps complete all as specified and directed by Engineer-in-Charge

S&F in replacement of socket, two-in-one, 5 pin, 5 Amp, universal type, 230 volts, complete all as specified and directed by Engineer-in-Charge

Supply and fixing switch socket combination multi purpose 2 in 1, 3 pin 5 Amp and 15 Amp, flush type complete all as specified and as directed by Engr-in-charge.

Supply and fixing LED lights with complete fitting 1x 20/22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.

S&F lamp holder, PVC/Polycaronate type with back plate complete all as specified and directed by Engineer-in-Charge

S&F LED bulb 10 Watt complete all as specified and directed by Engineer-in-Charge

S&F LED bulb 12 Watt complete all as specified and directed by Engineer-in-Charge

Supply and fixing ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and as directed by the Engineer-in-Charge.

S&F in replacement of Distribution Board, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.

S&F MCB single pole and neutral 35 to 60 Amps, 240 Volt, C curve 10 KA complete all as specified and directed by Engineer-in-Charge

S&F MCB single pole 5 to 30 Amps, 240 Volt, C curve 10 KA complete all as specified and directed by Engineer-in-Charge

S & F new energy saving bulk head fitting 12 watt made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 as required to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washer of suitable size including making connection complete all as specified and directed by Engineer-in-Charge

Supply and fixing CUB LED Flood light luminaire with high presure dia cast housing acting as heat sink complete with all accessories incl two run of 1.5 Sqmm Copper conductor cable from street light to junction box/OH conductor/Switch board/MCB fitting complete of 90W LED including required modification for fixing the same in existing bracket/GI light grade pipe etc all as specified and directed by Engineer in charge.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 of SSR 2009 Part-I and connecting to MCBDB’s earth test point all as specified or indicated including testing on completion .

M/S LIBE & CO

M/s Koul & Sons