CERTAIN REPAIR TO TILES, INTERLOCKING TILES, PLINTH AND SANITARY FITTINGS AT ZONE-II UNDER GE (A) JAISALMER

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified & directed by Engineer-in-Charge.

M&L for 25mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in subbase of floors & finishing the surface even & fair without using extra cement complete all as specified & directed by Engineer-in-Charge.

S&F glazed ceramic coloured tiles of size 450mmx300mmx 7mm thick joint free on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick backing coat in CM (1:4) complete all as specified and directed by Engineer-in-charge.

M&L light shade, vitrified tiles, 10mm thick (minimum), (square/ rectangular polished, area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm in flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding in CM (1:4) complete all as specified & directed by Engineer-in-charge.

S&F in repair vitreous china squatting pan orissa pattern complete of size 580 x 445 mm white with intagral foot rest and making good to the floor complete all as specified & directed by Engineer-in-charge. (Make :- Jaquar Cat part No-CNS-WHT-451 or equivalent in Appx 'C'list of make)

S & F in repair Vitreous china wash down water closet pan (Pedestal pattern), white (EWC) with necessary P/S Trap and fixed in repairs including jet spray and seat cover complete all as specified & directed by Engineer-in-charge. (Make :-Cera Cat Part No-S1050104, hindware cat Part No-20011 or equivalent in Appx 'C'list of make)

S&F in repair bib taps 15 mm dia of cast, copper alloy chromium plated with crutch or butter fly handle screwed down screwed for brass ferrule or iron pipe complete all as specified & directed by Engineer-in-charge. (Make :-Prayag Cat Part No.- 8306, Cera Cat Part no. -F 2006151/ Hindware Cat Part No. -F 330003/ Silver shine model No:-1001) or equivalent in Appx 'C'list of make)

S & F in repair hand shower for bathroom with Hook & 1.5 Meter Flexible Chain etc complete all as specified & directed by Engineer-in-charge.

S&F in repair pillar taps 15 mm bore cast copper alloy with capstan head chromium plated screwed down high pressure with or without 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed complete all as specified & directed by Engineer-in-charge. (Make :- Prayag Cat Part No.- 8304/ Cera Cat Part no. -F 2006101/ Hindware Cat Part No. -F 33002 or equivalent in Appx 'C'list of make)

S & F in repair 20mm stop cock fancy type cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends or for unions etc complete all as specified & directed by Engineer-in-charge.

S&F in repair PVC low level white flushing cistern syphonic action type 10 ltrs capacity incl flush pipe 32 mm dia incl PVC connection 450 mm long complete all as specified & directed by Engineer-in-charge. (Make Cera Cat Part No-B1010102 or equivalent in Appx 'C'list of make)

S & F in repair for pressure jet for western type water closet with PVC connection 600 t0 900 mm long including brass head screw and suitable washer complete all as specified & directed by Engineer-in-charge.

S & F in repair 600 mm long PVC connection pipe of 15mm bore with PTMT nut at both ends complete all as specified & directed by Engineer-in-charge.

Demolition of cement concrete unreinforced in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m all as specified & directed.

M&L for 75 mm thick plain cement concrete (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in sub base of flooring/ hard standing path & finishing the surface even & fair without using extra cement all as specified & directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 25mm thick sand cushioning complete all as specified & directed by Engineer-in-charge. Note :- (i) Pattern of interlocking tile to be rubber moulded or equivalent as approved by GE. (ii) Rate quoted by the contractor shall deemed inclusive of PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) packing and finished even and fair to the sides of pavement.

M&L plain cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates etc complete all as directed and specified.

Dismantling structure steel works including door gates but excluding framed trusses etc complete all as specified & directed.

S&F rolled mild steel joist, channel, angle or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated) conform to Fe 410-W (Gde E-250 quality-A) complete all as specified & directed by Engineer-in-charge.

S&F, rolled mild steel framed work as in doors or gates of angle or other section confirming to Fe 410-W (Gde E-250 quality-A) with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door, fittings and hanging, also fastering and fixing complete all as specified & directed.

Dismantling plain or corrugated steel sheeting , any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified & directed by Engineer-in-charge.

M&L, pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge.

Taking down Chowkhats or frames with shutter (without taking off shutters from the frames) not exc. 1.5 sq. m each and removing to store complete all as specified & directed by Engineer-in-charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with single piece extruded PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of single piece extruded PVC profile for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified & directed by Engineer-in-charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified & directed by Engineer-in-charge.

S&F, 75mm size, butt hinges, medium weight, cold rolled mild steel including necessary welding if required all as specified & directed by Engineer-in-charge.

Supply and fixed aluminium handles, cast type, anodised 125 mm size complete all as specified & directed by Engineer-in-charge.

S&F 150 mm aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified & directed by Engineer-in-charge.

Dismantling Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) complete all as specified & directed by Engineer-in-charge.

M&L for 35mm thick precast cement concrete louvers and jallies type C-0 (1:3:6) using 12.50mm graded aggregate (measured solid), including all mouldings but excluding frame, set in cement mortar 1:4 complete all as specified & directed by Engineer-in-charge.

M& L plain cement concrete (1:2:4) type B-1 (using 20mm graded stone agregate) cast in situ kerb stone, copings, bed plates, water through and the like including wethering, slightly rounded or chamfered angles and throating including use of form work (straight or curved ) set in CM 1:4 complete all as specified & directed by Engineer-in-charge.

S&F in repair aluminum power coated partition wall of aluminum section 100mm x 44mm x 2mm thick frame rectangular section and panel 12mm thick prelaminated board in bottom panel and 5.5mm thick sheet glass in top panel with rubber lining and aluminum beading around length including necessary fixing arrangement for bottom and top member of aluminum frame in floor/PCC/Brick work as per site requirement with rawl plug etc, including chromium plated steel screws 60cm centre to centre complete all as specified & directed by Engineer-in-charge. (Note :- Rate quoted by the Contactor shall deemed to inclusive of 12mm thick prelaminated board and 5.5mm thick sheet glass).

Supply fabricating and fixing in repair of aluminium door powder coated of extrusion aluminium section including frame work complete, consisting of frame vertical and horizontal members, of size 104mmx44.45mmx 1.8mm thick. Vertical style of door shutter of size 85mmx44.45mmx 1.8mm thick. Top, middle and bottom rial of size 85mmx44.45x1.8mm thick and partially 5 mm thick plain/tinted sheet glass of partially prelaminated particle board 9 to 10mm thick with aluminium bedding and rubber gasket/beading including frosted film as desired fixing of hydraulic floor spring one in single leaf or two nos in double leaf door. One mortice lock for aluminium door (each) and two aluminium tower bolts for each door. Fixed with rawl plug including rectification of floor/wall to match the existing surfaces all as specified and as directed by Engineer-in-Charge at site. Note :- Rate quoted shall deemed to inclusive of partially 5 mm thick sheet glass with sun control film and partially 12mm thick prelaminated particle board.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty approved by Engr-in-Charge

Dismantling boarding, any description, fixed in any position with nails complete all as specified & directed by Engineer-in-charge.

Supply & fixing of false ceiling in step (s) comprising of 12 mm thick Gypsum board including GI frame work for seamless ceiling made of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 M length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including two coats of plastic emulsion paint complete all as directed. (Note : The measurement shall be made from wall to wall without considering step(s)/overlap at steps)

S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on and including 5mm thick PVC sheet fillets of width 50mm for wall paneling inclusive of fixing on wall to make frame including taking down old wall panelling including frames complete all as specified & directed by Engineer-in-charge.

S & F Table top Wash hand basin white, including cutting for and pinning ends of brackets or erecting stand complete all as specified & directed by Engineer-in-charge. (Make :-Jaquar Model Cat No: JDS-WHT- 25909 or equivalent in Appx 'C' list of make)

S&F in repair single piece wash down water closet pan (Pedestal), white (EWC)including fixing bolts, flushing cistern and flushing pipes etc complete all as specified & directed by Engineer-in-charge. (Make :-Jaquar Model Cat No: SLS- WHT -6201 or equivalent in Appx 'C' list of make)

S&F in repair of wall mixer with connector for Hand shower arrangement with connecting Legs, wall flanges & wall bracket for hand shower, made of cast copper alloy, chromium plated fancy type complete all as specified & directed by Engineer-in-charge. (Make: Jaquar cat part No FLR-5267N or equivalent in Appx 'C' list of make)

S&F in repair shower arm of 20mm dia & 300mm long Square shape with 90° bend for wall mounted showers with wall flange made of cast copper alloy, chromium plated fancy type complete all as specified & directed by Engineer-in-charge.

M/S SHRINARAYAN MEENA

AMBEY MAA CONSTRUCTION COMPANY

M/s Shri Inder Construction Company

M/S MAYA CONSTRUCTION COMPANY

BHAGWATI CONSTRUCTION

Bhawani Constructions

S AND S Constructions

S K TRADER