Balance work including finishing items for Indoor Stadium at Budgam.

Amount

Earth work in excavation in trenches by mechanical/ manual means for foundation drains pipes etc. not exceeding 1.5 Mtr in width upto desired depth (as per design) in all kinds of strata incl. disposal of excavated earth beyond 100 Mtrs lead or as directed by EIC including loading/ unloading / dosing etc Surplus excavated earth is to be disposed beyond the municipal limits by mechanical means including all equipments and machinery including to prevent sliding of sides of foundation, effective and sufficient protection, providing staging, timbering and shuttering etc including dewatering of trenches during execution of all items of work upto NSL. (All kinds of soil).

Supply and laying of stone soling (size 150mm - 230mm) (hand packed ) in trenches of foundation incl. consolidation, levelling, watering and ramming including all consequential and incidental costs like all leads, lifts , carriages etc Complete job.

P/L in position Cement Concrete of specified grade excluding the cost of centering and shuttering. But Incl. consequential and incidental costs like all leads, lifts and carriages complete job.a) 1:4:8 mix ( 1 cement: 4 coarse sand: 8 graded stone crushed aggregate 40 mm nominal size)

b) 1:2:4 mix ( 1 cement: 2 coarse sand: 4 graded stone crushed aggregate 20 mm nominal size)

CONTROLLED CEMENT CONCRETE Cast in situ Design mix of M-20 grade and high workability (compacting factor over 0.92), water cement ratio as per design cement content not less than 300 Kg/cum, nominal max size of stone aggregate 20mm, weigh batching, including curing but excluding the cost of centering, shuttering, finishing and reinforcement in beams, plinth beams, columns, girders, bressumers and cantilevers, suspended floors, lintels, roof bands, stair cases and shelves etc. All work from foundation upto roof level, Incl. consequential and incidental costs like all leads, lifts and carriages complete job.

Reinforcement for RCC work incl. straightening, cutting, placing in position and binding all complete. Fe.500 Grade (conforming to IS:1786-1985) upto floor 5 level. incld. all consequential and incidental costs like all leads, lifts, carriages and scaffolding etc complete job.

FORMWORK Form work of steel plates not less than 3.0mm thick M.S. sheets of specified size/ water proofing ply sheets stiffened with suitable structural frame work up to desired height in foundation, foundation beams, plinth beams, lintel beams, all types of suspended floors, soffits of slabs, sloping areas, soffits of beams ribs, stepped/ spiral staircases etc up to desired heights and thickness incld. all consequential and incidental costs like all leads, lifts and carriages Complete job.

40mm thick cement concrete flooring in 1:2:4 ( 1 cement ; 2 coarse sand : 4 graded stone crushed agg. 20mm nominal size) finished with a floating coat of neat cement slurry incl. all cost and complete.

Providing granite marble stone flooring with 18mm thick marble stone (sample of marble shall be approved by Engineer Incharge) over 20mm thick base of cement mortar 1:4 (1 cement : 4 course Sand) laid and jointed with cement slurry including rubbing and polishing complete. (granite of approved colour and shade) finished work is to be measured.

Providing and fixing of stainless steel handrail of section as approved by the consultant of standard make including all fittings and fixtures Handrail, wall rail and Guardrail assemblies and attachments shall withstand a minimum concentrated load of 200 pounds applied horizontally or vertically down atany point on the top rail. Infill area of guardrail system capable of withstanding a horizontal concentrated load of 200 pounds applied to one square foot at any point in the system. Load not to act concurrently with loads on top rail of system in determining stress on guardrail. Handrail assemblies and guards shall be designed to resist a load of 50 pounds per linear foot (pound per foot) (0.73 kN/m) applied in any direction at the top and to transfer this load through the supports to the structure, Make exposed joints butt tight and flush. Interior sleeves shall be used for typical splices. Fasteners are allowed at splice connection. Verify dimensions on site prior to shop fabrication. Using epoxy glue for joiners and elbows. Complete Job

Providing and fixing vitrified floor tiles 60x60 cm in size (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make colours and shades laid on 20mm thick cement mortar 1:4 (1 cement: 4 course sand) incl. grouting the joints with white cement and matching pigments etc complete.

Construction of brick masonary inspection Chamber (450x450)mm inside depth 600mm in brick work in cement mortar 1:4 mix, RCC top slab with 1:2:4 mix, foundation concrete in 1:4:8 mix, inside plastering 12mm thick in cement mortar 1:3 mix with floating coat of neat cement and making channels complete, including cost of manhole frame and Cover of required size of stanard quality and carriage of all materials involved complete.

P/F of water closet squarting pan (W.C) Indian Type Orrisa pattern white vitereous china with 100mm pvc "B type" P or S trap, 10 litre capacity low level flushing cistern of approved make with flush pipe, manually controlled device (handle Lever) with all fittings and fixtures complete, incl. cutting and making good the walls and floors whenever required (580x440mm with intergal type foot rest)

Providing and fixing white vitreous china pedestal type water closet of approved quality (European lype W.C Pan) with seat and lid, 10 litres low level white PVC flushing cistern, including flush pipe with manually controlled device (handle ever) with all fittings and fistures complete including cutting and making good the walls and floors whenever required (W.C Pan ISI makred white solid plastic seat and cover)

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm size respectively with automatic flushing cistern with C.I/M.S brackets standard size of G.I. Clamps complete, including painting of fittings and brackets cutting and making good the walls and floors wherever required. (one urinal basin with 5 litres PVC white automatic flushing cistern of approved quality)

Providing and fixing white vitreous china wash basin size 630x 450 mm with pedestal of approved make C.P brass basin mixer (Jaquar/Parkoo or equivalent make), including painting of fittings and brackets, cutting and making good the wall.whenever required.

Providing and fixing white vitrious counter basin 450x450mm with CP Brass waste 32mm dia and waste pipe to be fixed on the granite counter (excluding cost of granite which shall be paid seperately)

P/F C.P brass fittings of standard quality and make (Jaquar or equivalent) Bib Cock with base cups (long nose)

Angle Valve

Basin mixer

Shower Rose

Health Faucit with holder

Soap dish

Floor Grating (100mm)

Toilet Paper holder

Towel rail of required size

(15mm nominal bore) PVC connection of approved quality and required length

P/F of looking mirror of superior glass (of approved quality), rectangular size ( 450x350)mm with plastic moulded frame of approved make and shade with 6mm thick hard board backing.

Providing and fixing 600x120x5 mm glass shelf with edges round supported on anodised aluminium angle frame with C.P brass brackets and gaurd rail complete fixed with 40mm long screws, rawl plugs etc complete

P/F of approved quality and make 50 litres capacity gyser (Venus or equivalent) including all necessary fittings nuts bolts and C.P tubes complete.

Providing and fixing in position polythylene septic tank type-B (Comfort or equivalent) having capacity for 20 users, 47"x51"x119" inches in size, including excavation of put as per the size, providing and laying of 150mm thick bed concrete in 1:4:8 mix (1: cement :4 Course Sand : 8 graded stone agg. 20mm nominal size) filling the septic tank with fresh water, connecting the inlet and outlet with the septic lank and filling the dry course of sand and bajre arround the septic tank complete job including carriage of all materials involved.

Dry random rubble masonry with hard stone in foundation and plinth using quarry stone with bond stones incl. carriage of stones.

P/F of water pump 2.0 HP (mono black type) kirloskar/cromption greaves or equivalent make incl. cost of fittings & electrical cabling etc.

Construction of underground water storage sump 3Mx3Mx1.6M size including earth work excavation dewatering of trench during execution laying of mud mad 100mm thick in 1:4:8 mix concrete over a bed of soiling 9" thick ,laying of RCC in 1:2:4 mix in foundation 4" thick, 9" thick walls, reinforcement not less than 1.20 qtls/cum including 12mm thick cement sand plaster in 1:4mix finished with a floating coat of neat cement slurry 5" thick RCC slab in 1:1.5:3 mix including M.S frame with cover 2'x2" size complete job, incl. all cost and carriage of material .

Supply, installation, testing and commissioning of branded pre-fibricated L.T distribution boards of LEGRANDS or equivallent make for 1 No. 100 Amp DP MCB, 10 No. 32-40 MCB's 24 No. 10-12 MCB;s, 24 Hour programmable digital meter including cost of inter company fabricated bushar system complete.

supply, installation, testing and commissioing of ChANGE OVER switch on load 200 AMP 4 pole. The cost includes cable termination box for both ends fitted of M.S pedestals.

Supply installation, testing & commissioning of the following accessories/equipments to be fitted in LT panel & distribution borad 200 Amp MCB TPN (Havells/SSK/Legrand or make)

63 Amp MCB TP (Havells/SSK/Legrand or make)

100 Amp MCB DP (Havells/SSK/Legrand or make)

32-40 MCB DP (Havells/SSK/Legrand or make)

10-25 MCB SP (Havells/SSK/Legrand or make)

CAPLING supply, laying, testing and commissioning insulated armoured cable in ground, walls, ceiling, trenches etc. complete with clamps, saddle, cable tags, markers, sand tile/brick etc for refilling of trenches 3.5 core 95mm. Of approved quality and make.

supply, laying, testing and commissioning insulated multistrand copper wire 16mm thick of approved quality and make in ground, walls, ceiling, trenchs, inconduitsetc complete with clamps, saddle, cable tags, markers, sand and brick fill etc. for refiling of trenches and cost of necessary PVC conduit wherever needed incl. making wire termination.

supply, laying, testing and commissioning insulated multistrand copper wire 6mm thick of approved quality and make in ground, walls, ceiling, trenchs, inconduits etc complete with clamps, saddle, cable tags, markers, sand and brick fill etc. for refiling of trenches and cost of necessary PVC conduit wherever needed incl. making wire termination.

EARTHING STATION supply and prviding earthing station conforming to IS 3043 as specified incl. excavating the earthing not less than 3 m deep and back filling with soil to treated soil components of alternate layers of charcoal and common salt incl. 600mm x 600mm x 3 mm copper electrode with earth conductor incl. masonry chamber with C.I cover, watering pipe (40mm dia G.I Pipe) and test links etc.complete

EARTHING CONDUCTOR supply, laying of earthing conductor in ground, built up trenches, cable trags, incl. clamps and fixing accessories incl. excavaton and back filling wherever needed (25mm x 3mm copper strip)

WIRING INSTALLATION Wiring, lightening points/bell points/fan points concealed type in stage wise i.e., the time of casting slab, plastering, flooring, finishing items with 3x1.5 Sqm copper wire + 1 No. earthing wire in 20/25 mm dia SFT PVC conducts with JB pull boxes, clamps, saddles and other accessories incl. fixing necessary out lets and connecting terminals switch boxes M.S type having earth point incl. testing and commissioning.

Wiring, heating points concealed type in stage wise i.e., the time of casting slab, plastering, flooring, finishing items upto first heating outlet with 3x2.5 mm2 copper wire + 1 No. 1.5 mm2 continous earthing wire in 20/25 mm dia PVC conduits with JB pull boxes, clamps, saddles and other accessories incl. fixing necessary out lets and connecting terminals switch boxes M.S type having earth point incl. testing and commissioning. complete

supply, laying testing of circuit wiring for lightening point using 2.5mm2 + 1.5 mm2 for continous earthing wire incl. commissioning.

Supply, laying, testing of circuit wiring for heating point using 4 mm2 for contineous earthing complet.

TELEPHONE/CABLE NETWORKING supply, laying commissioning of telephone copper wire 5 pair 0.7 mm laid in separate PVC conduits in walls, ceiling, floors trenches complete of approved quality.

Supply, layng, commissioning of insulated telephone copper wire 2 pair 0.7mm laid in separate Sft PVC conduits in walls, ceiling, floor trenches complete of approved quality/ make.

supply, layng, commissioning of Co-Axial cable RG 59/60 gasfilled in separate PVC conduits in walls ceiling, floors terences complete approved quality/make

FITTINGS AND FIXTURES Supply, laying, commissioning of a) 5Amp Switch Havells/SSK/Legrands

b) 5 Amp Bell Push

c) 6 Amp 2 Pin Socket

d) 6 Amp 3 Pin Sockets

e) 30 Amp Socket

f) 30 Amp Switch

h) telephone jack RJ-11

i) TV Socket

j) Dummy plug small

Supply and insallation of gang plates modular type with covr and plate white a) Module 2

c) Module 6

d) Module 8

e) Module 12

f) Module 18

supply, Installation, testing and commissioning of wall brackets mirror lights etc. of approved make.

supply, installation testing and commissioning of Canopy High Power led light IP66 with lamp type 80W Led 600K lumanaire code LHEMACP7PN 6S080 (Havells or equivalent make)

supply, testing, installation and commissioning of JETA 30 NEN LED IP 65 30 W LED 5000K Lamp type lumanaire code LHEPCZUEIN 6W030(Havells or equivalent make)

Supply , installation testing and commissioning of LED clean room IP 54 lamp type 42 W Led 6000K lumanaire code LHECCWL7PW W042 (Havells or equivalent make)

Sypply installation testing and commissioning of BOLT Square led light a) Lamp type 6W Led 6000K Lumanaire codeLHEAASP7ULIW006 (Havells or equivalent make)

b) lamp type 12 W Led 6000K Lumanaire code LHEAASP7ULIWO12 (Havells or equivalent make)

Supply, installation testing and commissioning of industrial type exhaust fan single phase 300 mm sweep.(Havells or equivalent make)

P/F 5mm thick float glass in fixed panes with budloo wooden beadings of required sections including cost of necessary nailscomplete

Supply anf fixing of asbestos free FIBRE Cement board made from homegenous mixture of protaland cement, treated cellulose fibre, finely grounded silca quartz and other materials (Everest or equivalent) sample to be approved by the engineer incharge, including necessary frame work of alluminium extruded built up standard tubular sections (40mm x 65mm section), frame mesh not less than 600mm x 1200mm, fixed with dash fasterners of required dia and size including necessary filling of gaps at junctions/top bottom and sides including all consequential and incidental cost like all leads lifts carriages and scaffolding.

Brick work with common burnt clay F.P.S (non-modular) bricks of class designation 75 in superstructure above plinth level upto floor V level in 1:6 mix ( 1 cement : 6 course sand) mortar incld. all consequential and incidental costs like all leads, lifts, carriages , scaffolding and curing complete job.

12 mm cement plaster in 1:4 ( 1 cement : 4 fine sand) on ceiling/beams etc incl. (upto floor V level)incld. all consequential and incidental costs like all leads, lifts, carriages scaffolding and curring etc complete job.

Wall Painting with plastic emulsion paint of approved of standard brand and manufacture to give an even shade. Two or more coats on new work

Finishing with epoxy paint (two or more coats ) at all locations prepared and applied as per manufacturers specifications incl. approprate priming coat including preparation of surface, etc (upto floor V level)incld. all consequential and incidental costs like all leads, lifts, carriages and scaffolding etc complete job.

Providing and fixing factory made UPVC door frame made of UPVC extruded, section having an overall dimension, as below (tnlerance+/-1 mm with wall thickness 2.0mm +/-0.2mm, corners of the door frame to be joined with galvanized brackets and stainless steel screws, joint metered and plastic welded. The hinges side vertical of the frames reinforced by galvanized MS tube of size 19x19mm and 1 mm +/-0.1 mm wall thickness and three numbers stainless steel hinges fixed to the frame complete as per manufacturers' specifications and irection of engineer-in-charge)

Providing and Fixing of Flex Boards incl. framework of M.S steel with printing of sports acheivements / activities or as directed by Engineer Incharge at Site.

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete

M/S MD INFRACON BUILDERS

M/S Ghulam Mohamd Bandroo

MANSOOR UL SALEEM DAR

HASHMI INFRASTRUCTURE PRIVATE LIMITED

KHURSHID AHMAD NAZKI