SPECIAL REPAIR TO 06 NOs TOILET BLOCKS/WASHROOM OF BLDG No. P-986 UNDER GE(A) JAISALMER

Amount

B&R WORK Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete un -reinforced in ground floors and pavings n.exc 15cm thickness complete all as specified and directed by Engineer-in-Charge.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. loaded bedded and pointed in any mortar complete all as specified and directed by Engineer-in-Charge.

M&L for 25mm thk PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in subbase of floors & finishing the surface even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick with gray cement and pigment, rubber moulded,set, jointed and pointed in neat cement slurry in floors and over 20mm th screed bed in CM (1:6) complete all as specified and directed by Engineer-in-Charge.

M&L for Granite of black / green / imperial red (colour as approved by Accepting Officer) of any type machine cut as in shelves/steps/counter tops, 16 to 18 mm thick, set and jointed in cement slurry over & including screed of 15 mm thick / rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab or with suitable adhesive for fixing on unpolished kota stone slabs and including rubbing, cutting and mirror type polishing and bull nose on exposed sides complete all as specified and directed by Engineer-in-Charge. Note : Single piece should be used in steps/cills/jambs/shelves

M&L Granite (of any type) work (table rubbed and polished) 16 to 18mm thick for wall lining / partition b/w urinals and for counter wash basin setting in 12mm thick in cement mortar (1:3) and pointing / fixing with epoxy grouting only using marble dust with admixture of pigment to match with shade of granite including cleaning of damaged granite and fix with epoxy grouting only complete all as specified and directed by Engineer-in-Charge.

M&L for non - skid coloured Ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in epoxy grouing only including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed by Engineer-in-Charge.

M&L for coloured Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in epoxy grouting only including 3mm PVC spacers to match & including 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster of any description, any thickness of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L hardcore of broken bricks filling of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge.

M&L for pain cement concrete type D2, 1:4:8 mix (using 40 mm graded stone aggregate) as filling of sunken floors complete all as specified and directed by Engineer-in-Charge.

M&L for applying Pitch Free PU based Liquid applied single component elastomeric seamless, water and vapor proof membrane system Nitoproof 600PF for concrete @ 2.50 kg/m2 (2 coats). Typical applications will include roofs, podiums, balconies, floor slabs, suspended floors, patios, bathrooms, inspection pits, swimming pools, bridge decks, Conforming Tensile Strength (2N/mm2 ) (ASTM D412) / Tear resistance (15 kN/m) (ASTM D624-00 and Crack bridging (ASTM C836 / ASTM C1305 modified)2mm. After 72 hours of curing, flood test can be carried out to a minimum depth of 50mm of water for 24 hours. Drains shall be plugged and barriers placed to contain the water complete all as specified and directed by Engineer-in-Charge. Make: Fosroc/Sika/Bostik/Choksey or Equivalent make as approved by GE and also All above operations to be done in presence of authorised applicator in order. Documents of applicator as approved by GE.

M&L for applying bond coat cum waterproofing on the prepared old surface of concrete/masonry to receive new readymade plaster/polymer mortar/polymer modified mortar with two coats of Slurry- @ approximately 2- 2.5 m2 / litre depending on substrate porosity as per manufacturer specifications. Laying of reinstatement readymade plaster/polymer mortar shall be completed within the overlay time of bonding coat. This bond coat act as bonding agent between old and new concrete complete all as specified and directed by Engineer-in-Charge. Make :- Fosroc Nitobond SBR300 or equivalent make and model as approved by GE. Note :The rate quoted by contractor shall include cleaning of surface, application as per instruction and scaffolding upto 20mtr height all as specified and directed

M&L for rendering 15 mm thick readymade plaster on inner/outer walls with adding 17-19% of potable water by weight of material. For thickness above 15 mm it is recommended to be applied in multiple layers. Ready-mix plaster shall complies with IS 1661-1972, IS 2250-1965, IS 2402-1963 and confirms the Compressive strength @ 28 Days- 10-12 Mpa/ Bulk density- 1500-1600 Kg/m3 complete all as specified and directed by Engineer-in-Charge. Make :- UltraTech READIPLAST, Birla, ACC JSW as approved by GE. Note :The rate quoted by contractor shall include cleaning of surface, application as per instruction and scaffolding upto 20mtr height all as specified and directed

Supply of SBR based waterproofing compound @ 2% dosage by weight of cement (1kgs) of 50kg cement used to be mixed in cement concrete as water proofing and hardening complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 5 mm thick readymade plaster on inner/outer walls with adding 17-19% of potable water by weight of material. Ready-mix plaster shall complies with IS 1661-1972, IS 2250-1965, IS 2402-1963 and confirms the Compressive strength @ 28 Days- 10-12 Mpa/ Bulk density- 1500-1600 Kg/m3 complete all as specified and directed by Engineer-in-Charge. Make :- UltraTech READIPLAST, Birla, ACC JSW as approved by GE. Note :The rate quoted by contractor shall include cleaning of surface, application as per instruction and scaffolding upto 20mtr height all as specified and directed) Note :- for item No 13 to 17 :- (i) The water proofing treatment shall be applied by the company’s authorized applicator only. (ii) Contractor have to get prior approval of applicator or authorized agency by submitting its authorization letter to this office for approval prior to commencement of work. (iii) Submission of 10 year warranty certificate for waterproofing treatment work for leekage / seepage is mandatory after completion of work. (iv) The cost of Scaffolding work required at certain places is including in the respective items catered for repairs itself. No extra shall be paid for the same.

M&L for preparing of new plaster surface and applying three coat of white wash on newly plaster surface of wall complete all as specified and directed by Engineer-in-Charge.

M&L for preparing of newly plaster surface and applying three coat of white wash on newly plaster surface of ceiling complete all as specified and directed by Engineer-in-Charge.

M&L for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed by Engineer-in-Charge.

M&L applying two coats of cement based paint over a coat of alkali resistant paint complete all as specified and directed by Engineer-in-Charge.

Dismantling of 100 mm dia cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches of any size complete all as specified & directed by Engineer-in-charge.

S&F PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) 75mm bends any radius complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) 110mm bends any radius complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) multi floor trap 75 mm with grating including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) branch piece 75mm, single (single Y) equal or unequal with access door complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) branch piece 110mm, single (single Y) equal or unequal with access door complete all as specified and directed by Engineer-in-Charge.

S&F in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for fixing 75mm dia PVC pipe, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed by Engineer-in-Charge.

S&F in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for fixing 110mm dia PVC pipe, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) vent cowl 75 mm dia complete all as specified and directed by Engineer-in-Charge.

S & F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed by Engineer-in-Charge.

S&F in repair Vitreous china squatting pan of Orissa patten size 580 x 440 white colour including CI S/P trap long size as directed joint run and lead front or back inlet with integral footrest including connection to trap and to flushing pipe, anti-syphonage pipe, etc, fixed in repair complete and making good to floor in PCC 1:2:4 complete all as specified and directed by Engineer-in-Charge.

S&F european type water closet including CI P/S trap as directed including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe PVC 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm P/S trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors G.F.and including taking down existing of any description/size complete all as specified and directed by Engineer-in-Charge.

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including taking down existing of any description/size complete all as specified and directed by Engineer-in-Charge.

S&F vitreous china urinal white colour of Ist quality with push button angle valve along with CP connecting pipe from valve to urinal operated for urinal with complete kit including CP waste with PVC down pipe upto floor level as per urinal required size complete all as specified and directed by Engineer-in-Charge.

S&F for light colour vitreous china WHB Thin Rim Table top of size 600x 400x 160 mm (minimum) including CP waste pipe etc and including making ready to recieve push button pillar tap deck mounted or wall mounted including S&F all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer's instructions and all as specified including all Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge. Note : The items for counter will be measured and paid separately.

S&F CP brass deck mounted (as approved by GE) push button pillar tap fixed to wash hand basin including all fittings and fixtures complete all as specified and directed by Engineer-in-Charge.

S&F in repair angular stop cock, CP, fency type with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete fixed as in repair in all respect complete all as specified and directed by Engineer-in-Charge.

S&F in repairs brass chromium plated Health faucet with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC Flexible waste pipe 32/40 mm dia having length 900mm with socket for steel sink/WHB/urinal upto floor level complete all as specified and directed by Engineer-in-Charge.

S&F in repair CP Cockroch trap(127x127mm) with waste hole one and setting new one in CM 1:3 complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC connection 600mm long and 15 mm dia with brass fly nut at both ends complete all as specified and directed by Engineer-in-Charge.

S&F rotational moulded polyethylene water storage tanks of 2000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank complete all as specified and directed by Engineer-in-Charge..

S&F ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to dia of pipe 20mm as in repairs complete all as specified and directed by Engineer-in-Charge.

S&F in repair bib taps, CP, fency type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete fixed as in repair in all respect complete all as specified and directed by Engineer-in-Charge.

S&F 15mm bore tubes medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections complete all as specified and directed by Engineer-in-Charge.

S&F 20 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge.

Taking down shutters of any description exc 1 sqm but n exc 2 sqm Sqm each complete all as specified and directed by Engineer-in-Charge.

S&F Factory made ISI marked flush door shutters 35mm thick, BWP conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 2nd class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters complete all as specified and including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf

Taking down chowkat (without taking of shutter from the frame) not exc 1.5 sqm each including making good the disturbed surface in PCC 1:2:4 type B0 or CM 1:3 and white wash and cement base paint complete finished complete all as specified and directed by Engineer-in-Charge.

Providing and fixing factory made aluminium ventilators with 80 micron powder coating of frame of 127X38.10X1.74 mm and fixed shutters made of 45X45X1.63mm including 5mm thick frosted glass in lower 65% portion of shutters and stainless steel wire gauge 32 Gauge in upper 35% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed all respect as specified and complete all as specified and directed by Engineer-in-Charge. Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item

S&F solid PVC door frames of size 50x47mm made out of 5mm plain colour PVC sheet supplying and fixing in opening as per specification and drawing shown in SSR complete all as specified and directed by Engineer-in-Charge.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification and including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 125mm - 3 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf

S&F figured glass pin head type 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane and complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old decorated existing surfaces including cornices, plasterd or un plasterd surfaces by brooming down or steel wire brushing moulds, moss efflorescent salt and trading oil and gresy spots and applying one coat of white wash on wall complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old decorated existing surfaces including cornices, plasterd or unplasterd surfaces by brooming down or steel wire brushing moulds, moss efflorescent salt and trading oil and gresy spots and applying one coat of white wash on ceiling complete all as specified and directed by Engineer-in-Charge.

M&L for sand stone slabs 5cm thick in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

M &L for Pre-cast cement concrete block type C-1, 1:3:6 20mm graded masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 including demolition of PCC block masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15 mm thick on brickwork or concrete surfaces or surfaces other than fair faces of brick work or on one side of lathing in cement mortar 1:4 & finished the surface even & fair without using extra complete all as specified and directed by Engineer-in-Charge.

M&L for preparing of newly plaster surfaces of wall and applying two coats of cement based paint over one coat of primer complete all as specified and directed by Engineer-in-Charge.

E&M WORK Taking down carefully surface aluminium or copper point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete all as specified and directed by Engineer-in-Charge.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including MCBs any type and capacity making good the disturbed surfaces to match with the existing finishes complete all as specified and directed by Engineer-in-Charge.

M&L Point wiring used approved colour coding as per IS (Red, Black and Green) for single phase circuits), with multi-stranded copper conductor 1.5 sqmm nominal cross -sectional area, single core, PVC insulated and unsheated FRLS cable 1100 volts grade, ISI 694 marked with valid CML No. in and including medium grade, PVC concealed conduit MMS, ISI marked of dia not less than 20 mm and conduit accessories conceled in wall/roof/floor etc, ISI marked with valid CML No. (IS-9537 - 1983 for condits and IS : 3419 - 1976 for conduit accessories) with terminated to new pressed flush metal boxes readily available cover with outer plates inner plates et, suitable for mounting modular type switches, socket fan regulator etc PVC insulated multistanded copper conductor 1.5 Sqmm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engineer-in-Charge for the following :- Note : Modular switch and socket shall be measured and paid separately.

All as per Item No. 68.00 here-in-before but for one light point controlled by one switch

All as per Item No. 68.00 here-in-before but for one ceiling fan/exhaust fan point controlled by one switch

All as per Item No. 68.00 here-in-before but for one socket outlet 6 amp controlled by one switch on the same board with other switches.

All as per Item No. 68.00 here-in-before but for with copper conductor cable of nominal class area 4.0 sq mm for phase ,neutral & earth for power socket point 15 A .

S&F modular switch one way 6A, 1 module complete all as specified and directed by Engineer-in-Charge.

S&F modular socket 6A-2/3 pin combined 2 module complete all as specified and directed by Engineer-in-Charge.

S&F modular switch socket combined 6A/16A , 6 pin, 3 module complete all as specified and directed by Engineer-in-Charge.

S&F Ceiling rose, three terminals PVC/polycorbonate, isolated body complete all as specified and directed by Engineer-in-Charge.

S&F for MCB DB SPN 4 way double door IP 43 complete prewired including Bus Bar etc suitable for operation on 240 volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed by Engineer-in-Charge.

S&F for MCB DB SPN 8 way double door IP 43 complete prewired including Bus Bar etc suitable for operation on 240 volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed by Engineer-in-Charge.

S&F MCB's single pole and neutral 32 Amps, 240 Volts,10 KA rapturing capacity 'C' curve complete all as specified and directed by Engineer-in-Charge.

S&F MCB's single pole 10 Amps to 32 Amps, 240 Volts,10 KA rapturing capacity 'C' curve complete all as specified and directed by Engineer-in-Charge.

M&L for submain wiring with approved colour code/as per IS (Red,black & green for single phase)concealed conduit circuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 4.00 Sqmm (FRLS) in conduit including one run of PVC insulated multistranded copper conductor nominal cross sectinal area of 4.00 Sqmm (FRLS) of continous earth wire green in colour complete all as specified and directed by Engineer-in-Charge. Note :- Two runs of 4.00 Sqmm cable & one run of 4.00 Sqmm cable shall be paid as one unit length

S&F LED lights fitting 1x 18W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-Charge.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed by Engineer-in-Charge.

S&F Fan condenser, 4 Mfd, 240 volts for exhaust fan including PVC clamp complete all as specified and directed by Engineer-in-Charge. Make: Epcos, Bajaj, Havells, Crompton

S&F Exhaust fan blade plastic type up to 380 mm size complete all as specified and directed by Engineer-in-Charge.

Taking down ceiling fan / Exhaust fan/Wall fan/Air circulator fan of any sweep sealing cable ends dismanting blade and removing fan and blade to store complete all as specified and directed by Engineer-in-Charge.

Fixing only Ceiling fan/ exhaust fan/Wall Mounting/Air circulator and connecting up including provn of cable from ceiling rose or connector to fan complete all as specified and directed by Engineer-in-Charge.

S K TRADER (BID ID -3405552)

M/S R.K. Builders & Developer (BID ID -3413378)

Bhawani Constructions (BID ID -3411942)

M/s Shri Inder Construction Company (BID ID -3404423)

AMBEY MAA CONSTRUCTION COMPANY (BID ID -3413323)

M/S MAYA CONSTRUCTION COMPANY (BID ID -3412930)