1) Proposed Beautification of chowk and informative Digital Boards in MBMC Area. 2) Supply, Installation, Testing and Commissioning of Solar Street light at Different Location in Mira Bhayander Area. (Basic Facility Development Fund)

Amount

Description

ITEM NO.01 Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete. SSR 46.29/370

ITEM NO.02 Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete SSR 46.19/370

ITEM NO 03 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means SSR 21.02 / 189

ITEM NO 04 Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means SSR 21.04 / 189

ITEM NO 05 TRANSPORTING OF EXCAVATED MATERIALS lead 20.00 k.m. SSR in Statement C 1 (Page 717)

ITEM NO 06 Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. SSR 21.36/194

ITEM NO 07 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. SSR 21.37 / 194

ITEM NO 08 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. SSR 21.38 / 194

ITEM NO 09 Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/ quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade ) (PCC) SSR 24.10 / 216

ITEM NO 10 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C columns and steel stanchion etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) SSR 25.15/220

ITEM NO 11 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal fo R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade ) SSR 25.35/222

ITEM NO 12 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/ pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade ) SSR 25.54 /224

ITEM NO 13 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade ) SSR 25.74 / 225

ITEM NO 14 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. SSR 26.33 / 233

ITEM NO 15 Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. SSR 23.01/212

ITEM NO 16 Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. SSR 23.04 /212

ITEM NO 17 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete SSR 27.05 / 242

ITEM NO 18 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete SSR 32.11 / 257

ITEM NO 19 Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC‘s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist SSR 50.79/ 441

ITEM NO 20 Providing and applying one coat of aluminium paint of approved make to new structural steel work in building and workshop including scaffolding if necessary, cleaning and preparing surface (excluding primer coat) etc. complete. SSR 35.05/275

ITEM NO.21 Providing and laying stamp concrete with base coat in situ /ready mix CC M25 Grade having thickness 60-75 mm ,above base coat,colour hardner @3.5-4kg/SQMT sealer material 0.2KG/SQMT with lacquer finishing etc,paving with approved colour and stamping shapes with all necessary compaction finishing etc,completed as per standard specification MR

ITEM NO 22 Providing and casting in situ or precast tapering R.C.C. M-20 Semi Barrier type Kerb with gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering Incharge. Using Concrete Batching and Mixing Plant SSR 7.05/83

ITEM NO.23 Providing and fixing 0.90m x0 60m internal size rectangular air tight composite resin manhole cover and frame of approved brand with grade designation C250 as per EN-124 standard with bolt and lever type locking arrangement. Covers & trame shall have top abrasion resistant layer conforming to 1S-15658.2006 and pemissible permanent set value of 2 mm after the application of 2/3 test load in five continuous applications as per EN-124 the testing shall be performed in fully equipped and NABL certified test lab with random (batch test (2% of it size) as per testing procedure stated in EN-124 standard, including testing inspection of material sample and finished product in presence of MBMC (Engineers (3 nos) at Manufacturer's work etc complete as specified and as directed by Engineer-in-Charge (Inspection shall be as per guidelines of IS and EN 124 standard (specifications Light Duty Withrame (10Ton Capacity) Rectangular 600 x 900 MR

ITEM NO.24 Supplying and installation testing and commissioning of LED Display screen for on frame of approved size with necessary fittings etc.Having resolution ,pixel density,contrast ratio refresh rate ,colour processing viewing angles power consumptions including electric connection and programming ,IP grade and as per specification provided by engineer incharge and drawings complete. P8 OUTDOOR LED SCREEN Pixel Pitch: P8 Outdoor , Resolution : 40x20,Module Size: 320x160, Brightness :4500cd/m2, IP Grade : IP65, Refresh Rate :>3840, Lamp Defective Rate : <0.0003, LEDEncapsulation : SMD3535, Scan 1/5, Life :100000 hours, Cabinet Material : MS, PixelDensity: 15625 Controller connectivity WiFi , USB , LAN Fabrication & Installation For LED vIdeo screen canopy Canopy for covering led screen from top end Transportation Charge MR

ITEM NO. 25 Providing & fixing of 1200mm high Glass Fibre Reinforced Composite railing for footpath made of 80x80x8mm inverted profile for fencing column, 50x50x6mm profiles slotted as horizontal members, 25x15mm rods for vertical members, SMC moulded square ring & cap including cover ring for 50x50mm tube. The column shall be fixed on M.S Base plate with 2 coats of red oxide and the same shall be rested on 100mm PCC in 400x400x500mm deep pit. 60 micron thk polyurethane paint All the components should have fibreglass content, Isopthalic grade resin, absorption, tensile strength, etc. as per specifications. M40 grade concrete should be used for embedment of fencing column. directed by the Engineer In-charge as per site condition. The above rate is inclusive of excavation, resurfacing & removal of excavated soil from the site. MCGM-R2-RT-16-84

ITEM NO 26 Providing & fixing of 900mm high Glass Fibre Reinforced Composite Bollard made of 100mm dia decorative serrated tube of 8mm thick with SMC/BMC moulded cap on bollard. SMC/BMC moulded reflector tape ring pasted with 3 Nos. of Micro Prismatic Grade retro reflective base tape yellow colour confirming to type XI standards. All the components should have fibreglass content, Isopthalic grade resin, Water absorption, tensile strength, etc. as per specifications. 60 micron thk polyurethane paint with half mat semi gloss finish should be used. The Bollard shall be fixed on M.S. Base plate with 2 coats of red oxide & the same shall be rested on 100mm PCC in 400x400x500mm deep pit. M40 grade oncrete should be used for embedment of bollard. as directed by the Engineer In-charge as per site condition. The above rate is inclusive of excavation, resurfacing & removal of excavated soil from the site. MCGM-R2-RT-16-87

ELECTRICAL

ITEM NO.27 Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW CSR 1-3-1

ITEM NO.28 Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW CSR 1-3-2

ITEM NO.29 Supplying and laying HMS PVC conduit FRLS grade 20 mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. CSR 1-1-8

ITEM NO.30 Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. CSR 1-1-9

Supply, Installation, Testing & Commissioning of 1100V grade, Aluminum/copper conductor, PVC/XLPE Insulated & galvanized steel tape armouring. The cable shall be heavy duty type conforming to IS-1554 & 7098. The cable shall be suitable to lay directly underground in Existing trenches/RCC Ducts/Sleeves/Cable trays. Rate shall be excluding of cabling laying related civil work.

ITEM NO.31 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 7-1-29

ITEM NO.32 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL CSR 7-1-28

ITEM NO. 33 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU CSR 7-2-11

ITEM NO. 34 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU CSR 7-2-12

ITEM NO.35 Supplying & erecting single compression type brass cable glands for 3 to 4 core 16 sq mm /3 to 4 core 25 sq mm /3 core 35 sq mm for XLPE armoured cable as per specification No. CB-GL CSR 7-7-3

ITEM NO.36 Supplying & erecting crimping type copper lugs for cable up to 16 sq mm complete as per specification No. CB-CL/CU CSR 7-9-1

ITEM NO.37 Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP CSR 9-1-4

ITEM NO.38 Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. CSR 9-2-3

ITEM NO 39 Supply and erecting 9m (clear height) Fixed type high-mast (Top-100mm, Bottom- 200mm) with hexagonal /round bracket and foundation bolts suitable for max. 4 nos. flood light fixtures on provided foundation as per specification no. OH-PL/OPL (excluding luminaires). CSR 8-2-8

ITEM NO 40 Supplying and erecting outdoor stand mounted feeder pillar for high-mast of the same manufacturer with 63A TPN MCB incomer, 24hr astronomical time switch with minimum 5 Years battery backup, , IP 54 and IK10 protection, 45 A TP contactor for automatic switching of luminaires, 2 no 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables complete erected in min. 14 SWG CRCA sheet box powder coated with supporting angles, self lock, gasket and slanting top erected on CC foundation complete. . CSR 8-2-24

ITEM NO 41 Supplying and erecting flood light luminaries suitable for 200 W H.P.S.V. lamp complete with accessories on high mast on provided bracket MR

LANDSCAPING

ITEM NO.42 Preparing Lawn (30 cm. depth):- Excavating the ground to a required depth of 30cms, removing & conveying unwanted stuff to a required distance as directed. Filling fresh garden soil/silt & manure in excavated area in 3:1 proportion to a height of 30cms. Mixing garden soil and manure thoroughly well, leveling, and watering on previous night. Planting required variety of lawn grass as directed and maintaining till well established by watering, weeding, elinning rolling etc complete PARK AND GARDEN DSR 15-16

ITEM TO.43 Preparingflower Bed:-Excavating the ground to the required depth of 30cms, Removing and conveying unwanted stuff to a required distance as directed, Filling fresh garden soil & manure in excavated area in 3:1 proportion to a required height of 30cms Mixing garden soil and manure thoroughly well, leveling, watering, on previous night. Planting seedlings of required annuals 25cms apart Maintaining till well established by watering. weeding, Stirring replacing of casualties etc, Complete. PARK AND GARDEN DSR 15-16

ITEM NO.44 GARDEN SOILSupplying on site garden soil well sieved 90% to pass through IS. sieve of 10 mm size free from stones rubbish like dried grass roots and other such materials. The soil should be fresh from quarry. The color of the soil generally is red. The soil will be measured by measuring box. (Farma) Item includes royalty charges, octroi, corporation Tax Transporting loading -unloading etc (Lead charges per 90 km. considered) PARK AND GARDEN DSR 15-16

ITEM NO.45 Sapling of small & medium Ornamental flowering plants, Ornamental ficus, Mussanda etc. Thuja, Cupresus, Common Ornamental Shrubs for Shrubbery PARK AND GARDEN DSR 15-16

ITEM NO. 46 Preparing Shrubbery - Excavating the ground to required depth of 30cms, removing and conveying unwanted stuff to a required distance as directed. Filling fresh garden soil & Manure in excavated area in 3:1 proporation to a height of 30cms. Mixing garden soil & manure thoroughly well, leveling, and watering on previous night, planting well developed shrubs plant 0.5 Mtrs. apart as directed and maintaining till well established by watering, weeding, stirring, replacing casualties etc. complete. PARK AND GARDEN DSR 15-16

ITEM NO. 47 Common Ornamental Shrubs for Shrubbery (1ft grown in poly bag PARK AND GARDEN DSR 15-16

Solar Street Light

ITEM NO. 48 Supplying, installing, testing and commissioning of Lithium Ion battery with capacity of 12 V- 18 Ah with duty cycle 10-12 hrs suitable to charge on PV cell with necessary wiring connections erected in powder coated protection box with stand and nut bolts complete. Specification no. ESD-SOL/BAT. CSR No. 4-3-8

ITEM NO. 49 Supplying, installing, testing and commissioning of solar panel comprising high efficiency poly-crystalline / multi crystalline photovoltaic cell 60 Wp, 12V with necessary clamps and module frame on existing structure complete. Specification no. ESD-SOL/CELL CSR No. 4-3-5

ITEM NO. 50 Supplying & Erecting LED solar street light of appropriate size suitable for lumen efficacy 90 lumen/watt at ground level with mounting height of fitting 5-7 m height from ground with IP 65 ingress protection with 12/14 W, lux level at ground min 50 lux, with p.f. > 0.95 with transparent lens as per specification no ESD-LED /ODF

ITEM NO. 51 Making cement concrete foundation including excavation ( 45 x 45 x 120 ) cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal, (45 x 45 x 45) cm / 45 cm dia. x 45 cm height plinth duly plastered, with necessary curing andfinishing complete. (for 6 m pole) CSR No. 16-3-2

ITEM NO. 52 Providing & erecting 4 m high galvanised conical pole withfoundation bolts having bottom dia. from 115 to 130 mm, top dia. from 65 to 75 mm on provided foundation as per specification no. OH PL/CPL. CSR No. 8-3-21

ITEM NO. 53 Charge Controller Auto On Off 10Amps,24V

ITEM NO. 54 Supplying and erecting PVC insulated PVC round sheathed 1sq.mm (32 no. x 0.20mm dia.) 3 core flexible multi strandedcopper Industrial cable for voltage grade up to 1.1 kV. CSR No. 1-3-26

ITEM NO. 55 Lugs

ITEM NO. 56 Nut Bolt

ITEM NO. 57 Screw

ITEM NO. 58 Solar Panel Frame with other accessories

Bitcon India Infrastructure Developers Pvt Ltd