Loading
Loading…
Loading…
Tender Value
₹1.9 L
EMD Value
₹3,900
Closing Date
2 Oct 2026, 6:00 pm5d left
EXECUTIVE ENGINEER OFFICE REW DIVISION REASI ROOM
EXECUTIVE ENGINEER OFFICE REW DIVISION REASI, BLOCK NO. 2, ROOM NO. 205
Repair and Renovation of Panchayat Ghar kolsar Pyt Kolsar Block Pouni Distt Reasi under capex DDC for the year 2026-27
2026_RDPR_325997_28
e-NIT No. 226 of REW REASl of 2026-27
Open Tender
Civil Works
Percentage
REASl
Please refer Tender documents.
2 documents required · 2 mandatory
₹200
MH 0515
₹3,900
25 Sept 2026
25 Sept 2026
3 Oct 2026
25 Sept 2026
2 Oct 2026
25 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Tile work in skirting, risers of step and dedo upto 2 metre height, over12mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) andjointed with grey cement slurry @ 3.3 kg/sqm, including pointing inwhite cement mixed with pigment of matching shade comple | 47.23 | Sqm | 1,294.8 | ₹61,153.4 |
| 2 | Making plinth protection with common burnt clay bricks of class designation 7.5 laid on edge in cement mortar 1:6 (1 cement : 6 coarse sand) with 12 mm thick bed of cement mortar 1:6 (1 cement : 6 coarse sand) over 75 mm bed of dry brick aggregate 40mm nominal size rammed, consolidated and grouted with fine sand. The top of bricks pointed with cement mortar 1:3 (1cement: 3 fine sand) and curing complete. | 47.4 | Sqm | 1,390.45 | ₹65,907.33 |
| 3 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 10 liter capacity – coloured | 1 | No. | 1,137.1 | ₹1,137.1 |
| 4 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. | 1 | No. | 412.1 | ₹412.1 |
| 5 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 | 3 | No. | 582.35 | ₹1,747.05 |
| 6 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 | 2 | No. | 583.25 | ₹1,166.5 |
| 7 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. | 2 | No. | 2,072.1 | ₹4,144.2 |
| 8 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040mm bowl depth 250mm | 1 | No. | 6,166.9 | ₹6,166.9 |
| 9 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | 1 | No. | 1,595.1 | ₹1,595.1 |
| 10 | Renewing glass panes, with putty and nails wherever necessary including raking out old putty : Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm) | 12 | Sqm | 991 | ₹11,892 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.67 MB
BOQ_1102360.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .