Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹2.0 Cr
EMD Value
₹3.1 L
Closing Date
19 Oct 2026, 5:30 pmDue tomorrow
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Karnataka State Police Housing and Infrastructure Development Corporation Limited
S Lokesha
CONSTRUCTION OF POLICE STATION (GRADE-4) AT KATKOL IN BELAGAVI DISTRICT
KSPHIDCL/2026-27/BD/WORK_INDENT504
KSPHIDCL/2026-27/BD/WORK_INDENT504
Open
Buildings
Two Tender Document System(Two Cover)
KSPHIDCL Contracts Section Bengaluru
15 documents required · 15 mandatory
1.3 of Section-3 Qualification Information: Work performed as Prime Contractor (in the same name) on works of similar nature over during the five years (2021-22 to 2025-26)
1.4 of Section-3 : Quantities of work executed as prime contractor (in the same name) during the last five years (2021-22 to 2025-26)
3.2- To qualify for award of this contract, each Tender in his/her/their name should have in the last five years i.e. 2021-22 to 2025-26): (b) Satisfactorily completed as prime contractor (at least 90% of the contract value), at least one simila nature of work of value not less than Rs. 101.82 Lakhs
ITT - 3.2 d) The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works totalling Rs. 7.12 Lakhs in any one year
3.2 (e) The Tenderer or his identified subcontractor should possess valid license for executing water supply/sanitary engineering works and should have executed similar water supply/sanitary engineering works totaling Rs.2.02 Lakhs in any one year
1.5 of Section-3 Qualification Information : Information on works for which Tenders have been submitted and works which are yet to be completed as on the date of this Tender : (A) Existing commitments and ongoing works & (B) Works for which Tenders already submitted
1.7 of Section-3: Qualification Information: Reports on the financial standing of the tenderer, such as profit and Loss statements and auditors reports for the last five years. (2021-22 to 2025-26)
Be a Class-II & above Civil registered contractor of State PWDs / Central/MES/ Govt. Undertakings
Be Registered with KSPH & IDCL
Be Registered with GST
Income Tax returns & PAN
Be Registered with EPF Authorities
ITT 3.3 (c)- Each Tenderer should further demonstrate Liquid assets and /or availability of credit facilities of no less than Rs.55.60 Lakhs (Credit lines/ letter of credit/ certificates from Nationalized / Scheduled banks for meeting the fund requirement etc (Unconditional)
ITT 3.2 - To qualify for award of this contract, each Tenderer / company in his / its name should have in the last five years i.e. 2021-22 to 2025-26 (c) Executed in any one year the minimum quantities of work executed (Please refer Tender Document)
ITT 3.2 - To qualify for award of this contract, each Tenderer in his/her/their name should have in the last five years i.e. 2021-22 to 2025-26: (a) Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.407.30 Lakhs
1.8 of Section-3 Qualification Information: Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are Proposed to be deployed on this contract, if awarded.
₹5,000
₹3.1 L
9 Oct 2026
9 Oct 2026
21 Oct 2026
15 Oct 2026
15 Oct 2026
Construction of Police Station (Grade-4) at Katkol in Belagavi District
Mechanical Means -
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...
Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse ...
Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse ...
Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement ...
Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement ...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removi...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removi...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including co...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including co...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 ...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 ...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement conc...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup ...
Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic...
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...
Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...
Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including apply...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including apply...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall...
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinar...
Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :New work (two coats) including a coat of approved steel primer b...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and r...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and r...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
polyurethane based single Component for Existing surface - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acry...
Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete.
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...
Printing New Letter and Figures of any Shade - Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade. Ref...
Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of ...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, incl...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, tr...
Providing and fixing ISI marked M.S. pressed butt hinges bright finished
with necessary screws etc. - 125x65x2.12mm
Providing and fixing ISI marked M.S. pressed butt hinges bright finished
with necessary screws etc. - 100x58x1.9mm
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Bar- rel type) with necessary screws etc. complete :
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992
with necessary screws etc. complete : 125mm
Providing and fixing bright finished brass hanging type floor door stopper
with necessary screws, etc. complete.
Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge - sS Aldrop 16mm dia, 200mm
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, ...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting Each deposited layer by ramming after watering with a lea...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jo...
Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...
Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...
Providing and fixing PTMT pillar cock of approved quality and colour: 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 g
Providing and fixing C.P. brass bib cock of approved quality conforming
Providing and fixing C.P. brass long body bib cock of approved quality
conforming to IS standards and weighing not less than 690 g.
Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing
not less than 85 g
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...
Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...
Providing and fixing brass full way valve gate with C.I. wheel of
approved quality (screwed end) : 32 mm nominal bore
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fitting...
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pip...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...
Providing and fixing mirror of superior Glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...
Providing and fixing PTMT grating of approved quality and colour.- Circular type - 125 mm nominal dia
Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...
Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/ stone masonry including rounding off corners where...
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includ...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Making soak pit 2.5 m diameter 3.0 m deep with 45 x 45 cm dry brick honey comb shaft with bricks and PVC S.W.R drain pipe 100 mm diameter, 1.8 m long complete as per standard d...
Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including PVC (S.W.R) drain pipe 100 mm diameter and 1.20 m long complete as per standard design.
Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and ...
Mechanical Means -
Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all mater...
Preparation and Surface Treatment of Formation. - Preparation and surface treatment of formation by removing mud and slurry, watering to the extent needed to maintain the desired moisture content, t...
Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...
Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...
Granular Sub-Base - Plant Mix Method - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material...
Plain Cement Pavement Quality M30 grade Concrete (RMC) with OPC & GGBS laid without Paver - Construction of un-reinforced plain cement concrete pavement using RMC M-30 grade with OPC @ 270 ...
Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in...
Kerb Stones - Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer i...
Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...
Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...
Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel ...
Electrical to Concealed Conduit System Supplying heavy gauge PVC conduit pipe 19 or 20 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, metal or PVC junction boxes, adhesive pas...
Concealed Conduit System to Supplying heavy gauge PVC conduit pipe 25 mm dia 2 mm thick confirming to IS 2509 with suitable size bends, metal or PVC junction boxes, adhesive paste etc , and r...
Supplying and Fixing Metal Fan Box with Round Hook and as per the directions of Engineer in charge of the work
Groove cutting Supplying heavy gauge PVC Conduit Pipe 19 or 20 dia 2 mm thick with suitable size bends, metal junction boxes adhesive paste etc , by groove cutting in the wall and fixing by br...
Groove cutting Supplying heavy gauge PVC Conduit Pipe 25 dia 2 mm thick with suitable size bends, metal junction boxes adhesive
paste etc , by groove cutting in the wall and fixing by bracing U or J ...
Wiring for lighting or power circuit using one of FRLSH PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specifi...
Wiring for lighting or power circuit using one of FRLSH PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specifi...
Wiring for lighting or power circuit using one of FRLSH PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specifi...
Point wiring using copper wire with out switch Supplying and wiring adopting loop system in existing PVC Conduit or casing capping casing capping using 2x1 5Sqmm (Phase and Neutral and 1x1 0 sqmm (Ea...
Point wiring using copper wire with out switch Supplying and wiring adopting loop system in existing PVC Conduit or casing capping casing capping using 2x1 5Sqmm (Phase and Neutral and 1x1 0 sqmm (Ea...
Point wiring using copper wire with out switch Supplying and wiring adopting loop system in existing PVC Conduit or casing capping casing capping using 2x1 5Sqmm (Phase and Neutral and 1x1 0 sqmm (Ea...
Supplying And fixing or replacing of 6 or 16 or 32A electrical accessories on existing switch board 6A Batten Holder
Suppying and fixing cast Aluminium round or ablong type LED 10 watts bulk head fitting suitable for operation of 220 to 240 Volts with burning hours 25 to 50,000 ,as per the directions of Engineer i...
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc , for operation on 230 volts, 50 cycles Single phase AC supply conforming to ISS to 374 to 1979 and with dou...
Fixing a ceiling or Wall mounting fan of all capacities and all types to the existing FeetS Feet hook with fan regulator to the existing board together with supplying and fixing 5 amps ceiling r...
Supplying exhaust fan of 1440 RPM of 300 mm(12 Feet size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply, ,as per directions of engineer incharge of the work
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps Ceiling rose wisth sufficient length of 23 or 0 0076 inch PVC insulated twincore wire ,as per directions of...
Supplying of feet to Aluminium Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours and 70persentage lumen maintenance with CRI greater than 80 P...
Fixing all types and all capacities of LED light fittings indoor on the wall or ceiling or rafters or girders using 23 or 0 0076” twin twisted PVC insulated wires, required Nos of round blocks ...
Supplying, fixing, wiring, earth electrode for grounding conduits, I C cutouts and other equipment Feets on the meter board using 40mm dia 2 90mm thick GI pipe 2 5 mtr long buried in a pit The pit...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2 9mm thick 2 5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
Supplying and running of GI or Copper strips for grounding connections, using necessary fixing materials as required ,as per directions of engineer incharge of the work GI strip 25x3mm
Supplying and running of GI or Copper strips for grounding connections, using necessary fixing materials as required copper strip 25x3mm
Supplying and running of Copper strips for grounding connections, using necessary fixing materials as required Copper strip f 600 x 600 x 3mm copper plate as per the directions of Engineer in charge...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick or Stone or C...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick or Stone or ...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick or Stone or ...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick or Stone or ...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick or Stone or ...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws, bolts nuts etc , complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws, bolts nuts etc , complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws, bolts nuts etc , complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws, bolts nuts etc , complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws, bolts nuts etc , complete on the existing m...
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 and as per the directions of Engineer in charge of the work i 6 Amps on...
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 and as per the directions of Engineer in charge of the work iv b 16 Amp...
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 and as per the directions of Engineer in charge of the work ii 6 Amps 3...
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 and as per the directions of Engineer in charge of the work iv d 6 or...
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 and as per the directions of Engineer in charge of the work l RJ45 or...
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 and as per the directions of Engineer in charge of the work v Stepped F...
Supplying and fixing of modular switch or Socket or stepped electronic fan regulator or dimmer or telephone socket etc on existing modular switch plate and as per the directions of Engineer in cha...
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 and as per the directions of Engineer in charge of the work 32Amps DP sw...
Supplyingandfixingoneof230VDingdongbellandaflushtypebellpushwithgangboxfixedonnecessarywoodenorrawlplugsusingNFscrews with Remote
Supplying of 1 1 kV, XLPE or Heat resistant PVC
insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS to 1554 (Part1 or IS to 7098 Part to 1, Armouring strip thickness and resistivity as ...
Supplying of 1 1 kV, XLPE or Heat resistant PVC
insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS to 1554 (Part1 or IS to 7098 Part to 1, Armouring strip thickness and resistivity as ...
Labour charges for laying of 1 1 KV class UG cable when supplied agency stoneware pipe or on wall or on pole as required In exixting trench or duct 2 5 sqmm to 25 sqmm as per the directions ...
Supplying and fixing L T cast Iron pot heads suitable for 1 1 KV class UG cable filled with necessary bitumen or insulating compound complete with terminals, clamps, bolts, nuts and washers etc 1...
Digging of trench of 0 6m deep x 0 50 mtr wide refilling the trench to the required ground level and consolidating etc , complete (As per Civil SR KSRB I to 2, P to 7 as per the directions of Enginee...
Supplying and fixing of class A (medium duty GI pipe of wall thickness not less than 3 25mm on pole or wall or drain crossing with necessary clamping arrangements for UG cable of 1 1 KV class and as...
Supplying and Laying double walled corrugatted HDPE Pipe in cluding alll accessories
Fabricating supplying and mounting MS box made out SWG suitable for floor or wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipp...
Supplying and fixing angle iron frame work fabricated out of M S angle iron and M S flat with bolts, washers etc , and painted with 2 coats of red oxide and then two coats of approved paint ,as ...
Supplying 250 amps rated 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic or FRP or DMC insu...
Supplying of on load change over switches 4 poles, AC to 23A Duty, 415V, 50Hz, AC Supply With all accessories (SMEnclosure Sheet Metal Execution 63 A
Supplying and fixing Moulded Case Circuit Breaker (MCCB over the existing wood or panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete Protect...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A C 50Hz 12 or 24v D C ,as per the directions of Engineer in charge of the work
Supplying, fixing and wiring 3 phase Digital Ammeter or Voltmeter ,as per directions of engineer incharge of the work
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and FeetC Feet Type curve, indicator ON or OFF, energy cross to 3 with Short cir...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and FeetC Feet Type curve, indicator ON or OFF, energy cross to 3 with Short cir...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and FeetC Feet Type curve, indicator ON or OFF, energy cross to 3 with Short cir...
Supplying and fixing regular Double Door 12 Way SP andN MCB distribution boards on wall or wood board or flush mounting using required clamps, bolts, nuts etc , with provision for fixing suitable...
Supplying, fixing and wiring Residual current circuit breaker (RCCB240 or 450V upto 300mA sensitivity on existing wood or panel board 16 to 25 Amps 2 pole and as per the directions of Engineer in ch...
Supply of LED Streetlight 70w luminaire with pressure die cast aluminium housing body for optimal thermal dissipation Lamp compartment comprising of anti glare clear diffuser with Injection moulded p...
Supplying and Fixing of mm dia class A GI pipe bracket up to 2 mtrs long bent at suitable angle and fixing to this bracket 1 x40 or 2x40 watts fluorescent tube street light fitting of all capaci...
Supplying of recess mounting non integral type 2 Feetx2 Feet 36watt luminaire comprising of pressure decast or extruded aluminium housing, with spring loaded fase ceiling clamps, Power LEDs with CC...
Supplying and fixing of retrofit type to LED bulb 15 W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRIgreater than 70persentage efficacy greater than 80 lumen per w...
Supplyand Laying of UTP cat to 6E LAN cable and as per the directions of Engineer in charge of the work
Supplying and drawing PVC flexible one pair telepone unarmoured tinned copper cable 2 pair and as per the directions of Engineer in charge of the work
Supplying and Fixing of switch mounting rack with power manager and Cable manager 6U with 450mm depth
Supplying fixing of Network Switches 16 port Switch and as per the directions of Engineer in charge of the work
Supplying fixing of Network Switches port24 Port Gigabyte (manageable and as per the directions of Engineer in charge of the work
Supplying and Fixing of Patch panel for LAN cabling 24 port 10 or 100 patch panel and as per the directions of Engineer in charge of the work
Supplying and Fixing of Patch panel for LAN cabling 16 Port 10 or 100 patch panel and as per the directions of Engineer in charge of the work
Supplying and fixing of I or O socket with back box, Double I or o
Supplying and fixing of 1 mtrs Cat 6Patch Cable 2Mtr
Supplying and fixing of 2 mtrs Cat 6Patch Cable 2Mtr
Supply and installation of 9kg Stored ressureType,Pressure Guage, Gross Weight14 9Kg, empty weight 3 4Kg,Can Height 480MM, Diameter160MM, Discharge Time lessthan13Sees,Controll able discharge mechanis...
Supplying of 1 HP Open well Mono sub pump set suitable for operation on 230 volts 2880 RPM single phase AC supply And as per the directions of engineer incharge of the work
Supplying of 50 mm kirloskar or other approved make CI screwed foot valve, as per the directions of engineer incharge of the work
Supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic thermal overload relay help in anticorros...
Providing Submersible Pump Set 5 HP of 150mm dia suitable for bore well and confirming to IS 8034 to 2000;3Phase, SS Bowl and Impeller with Low volt Motor as per specifications, to work site as per ne...
Erection, Electrification and commissioning Work of Pump Sets eraction of pumpset including aligning and balancing with all necessary erection materials and labour including supply and erection of ...
Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to13 8130 to 1984 and vi...
Providing and fixing GI in existing GI pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete ...
Supply and delivery at site of brand new best make gate valve as per IS 778 or 1984 with ISI Mark and as per its latest amendments ,as per the directions of Engineer in charge of the work
Preparation of electrical internal external and panel bord etc drwaings as per the direction of engineer in charge of the work
Supply and delivery at site of brand new best make non to return valve as per IS 778 or 1984 with ISI Mark and as per its latest amendments ,as per the directions of Engineer in charge of the work
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING 1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...
Supplying and fixing of Porcelain fuse channel with cut out on existing wooden or panel using necessary nuts, bolts and washers 63Amps and as per the directions of Engineer in charge of the work
Supplying 9 Mtr RCC Pole 145Kg WL including earth work etc, Complete as per the standard technical specification , 9 Mtr 145Kg WL (Dwg No BESCOM or GM or QSandS or 02 Dtd 24 11 2018 as per IS to ...
Supplying of L T 4 Pin cross arms, with pole clamps, bolts, nuts and washers (for RCC poles
Supplying of Rabbit ACSR Conductor with 1 5persentage sag and as per the directions of Engineer in charge of the work
Fixing of guy set with guy wire, guyrod and break insulators etc complete set and as per the directions of Engineer in charge of the work
Erection of RCC or PSC poles 9 to 10 mtr long but in a pit of 1 8 mtr depth with consoldation etc, complete ,as per the directions of Engineer in charge of the work
Fixing of 4 Pin cross arm with insulator and Braces fixing and as per the directions of Engineer in charge of the work
Stringing of No 1 ACSR Rabbit conductor with 1 5persentage sag and as per the directions of Engineer in charge of the work
Supplying, erecting, testing and commissioning of 5 KVA ON to LINE UPS system suitable for operation on 230V, 50Hz, A or C supply, with isolation transformer all accessories one hour ...
Supplying, installation, testing and commissioning of 12V DC, AH batteries in poly propylene container for U P S Sealed maintenance free batteries 60 to 65 AH capacity
Extra for Fabrication supply and fixing of Stand fabricated using slotted angle or L angle of size 6mm x 50mm for mounting outdoor or indoor A C unit or Batteries
Supply of LED pole mounting type LED Post Top Lantern with 25 watts with pressure die cast aluminium housing body for optimal thermal dissipation Lamp compartment comprising of anti glare clear diffu...
Fixing charges of post top or Gate or Garden fitting or LED on the existing CI or GI or any other pipe using required size of reducer, wiring using suitable wires
Supply, erection, testing and commissioning of 50 ltrs RO water purifier water filter and connected accessoriers etc
Supply of erection testing and commissioning of water level controller and connected accessoriers etc
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130 to 1984 and (Virgin PVC insulation sheathed suitable for wo...
Supply of LED floodlight 70 Watts luminaire with pressure die cast aluminium housing body for optimal thermal dissipation Lamp compartment comprising of anti glare clear diffuser with Injection mould...
Preparation of electrical internal external and panel bord etc drwaings as per the direction of engineer in charge of the work
Supplying and installation of Solar Streetlight 24 watt including pole ,as per directions of engineer incharge of the work
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
katkol PS Encumbrance.pdf
Others - Encumbrance • 0.50 MB
Make List Civil and Electrical.pdf
Others - Make List • 1.02 MB
KW-4 Bid Doc PS WI-504.pdf
Tender Document • 1.04 MB
Drawing Katkol.pdf
Others - Drawings • 2.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .