Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.5 LAccepted-AOC NEAR INDUSTRIAL ESTATE THANDA PADDAR UDHAMPUR J K 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L1 | Accepted-AOC L1 | |
| 2 | L2₹24.3 L+₹3.8 L (18.4%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹24.6 L+₹4.1 L (20.0%)Rejected-Finance JAJJAR KOTLI JAMMU J K 151222 | JAMMU | JAMMU | J K | 151222 | L3 | Rejected-Finance Other than L1 |
Tender Value
₹28 L
EMD Value
₹56,000
Closing Date
10 Feb 2020, 6:00 pmClosed
GE UTILITIES
GE UTILITIES UDHAMPUR PO GARHI PIN 182121 UDHAMPUR
Special repair to water supply distribution network and Repair/Renovation of water pipelines and sprinkler pop up system in Depta under GE Utilities Udhampur
2020_MES_312932_1
GE/U-53/2019-20
Open Tender
Civil Works
Item Rate
180 days
UDHAMPUR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE UTILITIES UDHAMPUR
₹56,000
Yes
21 Mar 2020
8 Jan 2020
11 Feb 2020
8 Jan 2020
10 Feb 2020
27 Jan 2020
Amount
Taking up or down from trenches steel tubing of size 100 mm bore and connections, including for complete all as specified and directed by Engr-in-charge. Note: Earth work will be measured & paid separately.
Description all as per serial Item No 01 here-in-before but 80 mm bore complete all as specified and directed by Engr-in-charge.
Description all as per serial Item No 01 here-in-before but 50 mm bore complete all as specified and directed by Engr-in-charge.
Description all as per serial Item No 01 here-in-before but 40 mm bore complete all as specified and directed by Engr-in-charge.
Description all as per serial Item No 01 here-in-before but 25 mm bore complete all as specified and directed by Engr-in-charge.
Description all as per serial Item No 01 here-in-before but 20 mm bore complete all as specified and directed by Engr-in-charge.
Supply and laying GI tubing medium grade including GI fittings of size 100 mm bore like sockets, elbows, bends, Tees, unions, short pieces etc. laid in trench/fixing with wall complete including connection with main/branch lines of GI Pipes with all fittings complete all as specified and directed by Engr-in-charge.
Description all as per serial Item No 07 here-in-before but 80 mm bore complete all as specified and directed by Engr-in-charge.
Description all as per serial Item No 07 here-in-before but 50 mm bore complete all as specified and directed by Engr-in-charge.
Description all as per serial Item No 07 here-in-before but 40 mm bore complete all as specified and directed by Engr-in-charge.
Description all as per serial Item No 07 here-in-before but 25 mm bore complete all as specified and directed by Engr-in-charge.
Description all as per serial Item No 07 here-in-before but 20 mm bore complete all as specified and directed by Engr-in-charge.
S&F in replacement Gun metal of size 50 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-charge.
Description all as per serial Item No 13 here-in-before but 40 mm bore complete all as specified and directed by Engr-in-charge.
Description all as per serial Item No 13 here-in-before but 25 mm bore complete all as specified and directed by Engr-in-charge.
Description all as per serial Item No 13 here-in-before but 20 mm bore complete all as specified and directed by Engr-in-charge.
S&F Gun metal of size 50 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-charge.
Description all as per serial Item No 17 here-in-before but 40 mm bore complete all as specified and directed by Engr-in-charge.
Description all as per serial Item No 17 here-in-before but 25 mm bore complete all as specified and directed by Engr-in-charge.
Description all as per serial Item No 17 here-in-before but 20 mm bore complete all as specified and directed by Engr-in-charge.
Cutting and screwing existing steel tubing for altn/addn 100mm to 25mm dia complete all as specified and as directed Engr-in-Charge.
S&F in replacement cast iron double end flanged and drilled sluice valve, PN 1.6, non rising type, ISI marked, with CI hand wheel and stainless steel spindle including necessary GI bolts, nuts and washers and rubber insertion sheet for the 100mm bore complete all as specified and directed by Engr-in-charge.
S&F cast iron double end flanged and drilled sluice valve, PN 1.6, non rising type, ISI marked, with CI hand wheel and stainless steel spindle including necessary GI bolts, nuts and washers and rubber insertion sheet for the 100mm bore complete all as specified and directed by Engr-in-charge.
S&F in replacement cast iron double end flanged and drilled sluice valve, PN 1.6, non rising type, ISI marked, with CI hand wheel and stainless steel spindle including necessary GI bolts, nuts and washers and rubber insertion sheet for the 80mm bore complete all as specified and directed by Engr-in-charge.
S&F cast iron double end flanged and drilled sluice valve, PN 1.6, non rising type, ISI marked, with CI hand wheel and stainless steel spindle including necessary GI bolts, nuts and washers and rubber insertion sheet for the 80mm bore complete all as specified and directed by Engr-in-charge.
M&L for cutting of existing road for crossing of GI Pipes for laying of any size Pipes including necessary excavation and earth work including repairing the same as per existing ,width of trench & depth with pre mix bituminous carpet complete all as specified and directed by Engr-in-charge.
Excavation in trenches not exceeding 1.5 mtr wide and not exc. 1.5 mtr in deep and getting out in any type of soil for taking out and laying of tubing complete all as specified and directed by Engr-in-charge.
Removing excavated material of any type of soil from site to a distance not exc. 50 mtr away and depositing where directed to exc. 1.5 mtr above the starting point complete all as specified and directed by Engr-in-Charge.
Returning filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm thick after pipes have been laid and tested complete all as specified and directed by Engr-in-charge.
Construction of valve pit chamber of size 750mm x 750mm x 750mm (internal dimensions) with 15 cm thick PCC 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) as in lean concrete, 23 cm thick brick wall using sub class 'B' bricks, built in cement mortar 1:4, 10mm thick rendering all around the brick work in cement mortar 1:4, PCC (1:2:4) type B1 (using 20 mm graded curshed stone aggregate) as in coping for grouting MS frame including 03mm thick MS sheet cover with locking arrangement including 50 mm pad lock with double key arrangement, MS frame be made out of 50 x 50 x 6 mm thick angle liron including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primer including necessary excavation in any type of soil, returning filling in and removal of surplus soil to a distance not exc. 50 mtrs all as specified including demolition/dismantling of existing valve chamber complete all as specified and directed by Engr-in-charge.
Cutting and screwing existing steel tubing for altn/addn 80mm to 25 mm dia complete all as specified and directed by Engr-in-charge.
Taking up or down PVC PP-R pipe of size 75 mm dia inclusing all fittings complete all as specified and directed by Engr-in-charge.
Description all as per serial Item No 32 here-in-before but 50 mm bore complete all as specified and directed by Engr-in-charge.
Description all as per serial Item No 32 here-in-before but 25 mm bore complete all as specified and directed by Engr-in-charge.
Supply, laying, jointing & testing of PVC PP-R pipe heavy outer dia 25 mm of pressure rating 10 Kg/Cm2 in three layer with all fittings laid trenches complete all as specified and directed by Engr-in-charge.
Supply, laying, jointing & testing of PVC PP-R pipe heavy outer dia 50 mm of pressure rating 10 Kg/Cm2 in three layer with all fittings laid trenches complete all as specified and directed by Engr-in-charge.
Supply, laying, jointing & testing of PVC PP-R pipe heavy outer dia 75 mm of pressure rating 10 Kg/Cm2 in three layer with all fittings laid trenches complete all as specified and directed by Engr-in-charge.
S&F of pop-up sprinklers having radius of throw 20 meters and flow minimum 1.2 LPS at an operative pressure 4-6 Kg/Sqcm the sprinkler shall be impact driven rotary with provision for adjusting at any degree of rotating having 01 intel 20 mm opo up stake, self flushing shall be non corrodible, heavy duty including taking down old complete all as specified and directed by Engr-in-charge. Make: Rain bird/Getech/Globe
S&F in replacement of fully automatic star delta motor starter in sheet steel enclosure type MN 32 with single phase protection feature motor rating AC 3 phase 415 volts, 50 Hz for motor of capacity 30 Hp as per cat part No IHPASDQD8A complete all as specified and directed by Engr-in-charge. Make: Havells
PAUL TRADERS
BARU ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .