REPAIRS TO CERTAIN B/R WORKS AT RAKSHA BHAWAN AND REPAIRS TO BOUNDARY WALL, COVERED SHED AND PARAPET WALL IN SANGLI APARTMENTS, AHQ LODHI ROAD CAMP AND ECHS POLYCLINIC LODHI ROAD IN THE AOR OF AGE B/R KASHMIR HOUSE UNDER GE NEW DELHI

Amount

Demolition of brick work built in Cement morter or cement lime mortar incl all quoins, arches , pillar etc complete all as specified and directed.

M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

Dismantlling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed in Cement mortar 1:6 as in floor (Size and colour of tiles will be approved by GE) complete all as specified and directed.

M&L for joint free glazed ceramic coloured tiles in vertical surface 350 x 250 x 7 mm or 450 x 300 x 7 mm thick with matching highlighter over 10 mm thick rendering 1:4 CM set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles (Size and design/colour of tiles will be approved by GE) complete all as specified and directed.

M&L for Vitrfied Ceramic Double charged/Ultra charged tiles 10mm thick (Square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 Sqm , as in floors,skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in Cement Mortar 1:6 (Size and colour of tiles will be approved by GE) complete all as specified and directed.

S&F chequired cement concrete tiles glossy finished 300x300x22 mm thick set, jointed and polished in neat ement slurry in floors with cement and pigments complete all as specified and directed.

Taking down cement plaster on brick wall surfaces including reeking out joints hacking for key scrubbing down with water etc and removing the rubbish out of Mod Land complete all as specifeid and directed.

M&L 15mm thick rendering on fair or other than fair faces of brick work or concrete surfaces in cement mortar 1:6 finish even and smooth without using extra cement complete all as specifeid and directed.

M&L for rendering 15 mm thick in CM 1:4 on fair/unfair faces of brick work or concrete surfaces finishing even and smooth without using extra cement in mixed with WPC liquid @ 200 ml per bag of cement on walls.(WPC shall be measured and Paid separately) complete all as specified and directed.

Supply only water proofing compound liquid complete all as specified and directed.

M&L 10mm thick rendering on ceiling surfaces in cement mortar 1:3 finish even and smooth without using extra cement complete all as specifeid and directed.

M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation complete all as specified and directed.

M&L for preparation of new or old plasterd wall surfaces and applying 1.5 mm thick JK / Birla wall putty as per manufactures instructions, surfaces to be finished even and smooth over a coat of alkali resisstane primer and applying two coats of exterior emulsion first quality (APPEX ASIAN/ Weather coat (BERGER)/ Weather shield (ICI) or equivelent as approved) of approved colour complete all as specified and directed.

M&L for preparation of new or old plastered wall surfaces and applying two coats of oil bound distember over 1.5mm thick Brila/JK wall care putty over a coat of alkali resistant primer complete all as specifeid and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspeneded from soffit at approx 900mm center to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm center to centre including providing and fixing Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finishformulated jointing compound and 48mm wide fibre tape to provide seamless finish including preparation of newly surfaces of ceiling and applying two coats of oil bound distember over 1.5mm thick Brila/JK wall care putty complete all as specifeid and directed.

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each complete all as specifeid and directed.

Taking down chowkhats or frame with shutters without taking of shutters from frames not exc 1.5 Sqm each & removing form site incl making good disturbed portion complete all as specified and directed.

S&F (in repairs) sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specifeid and directed.

S&F (in repairs) stainless steel kitchen rack plate of size 750x900x200 mm depth fixed with screw all as specified and directed.

S&F (in repairs) Cascade, vitreous china wash down water closet ,wall mounted Couple closet Bowl-WC with UF seat cover, hinges, accessories set, size 660 x 375 x 760mm, P trap including Cistern with fittings complete all as specified and directed. (Make:Hindware (MARIO) Cat No: 20084 & Cist: 21052 or equivalent as approved).

S&F (in repairs) wash hand basin padestral type of size 670 x 510 x 820 mm including waste coupling complete all as specified and directed. (Make: Hindware (OPAL) Cat No: 10082 & Ped: 11032 or equivalent as approved).

S&F in repair wash basin mixer with popup waste with 450 mm long Braided hoses fixed on WHB complete all as specified and directed (make : Jaquar Cat KUP-35051BPM or equivalent as approved)

Demolition and breaking up drain pipes 100 mm bore salt glazed ware AC or reinforced concrete set in cement mortar complete allas specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC(SWR) 110mm bore bends any radius complete all as specified and directed.

Dismantling water tanks Exc 500 & not exc 1000 ltr capacity and removing to store complete all as specified and directed.

S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks triple layers (ISI mark) (Cylindrical vertical with closed top) hoisted & fixed in position including Tank Nipple, 25 mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball (Minimum weight - 455gms), screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F (in repairs) GI tubing medium grade with all fittings and fixed complete to wall, ceiling or laid in floors etc 20mm bore complete all as specified and directed.

S&F (in repairs) GI tubing medium grade with all fittings and fixed complete to wall, ceiling or laid in floors etc 15mm bore complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with screws complete all as specified and directed..

S&F 18/19 mm thick PVC solid one side prelam celluca plyboard of approved colour for cabinet boxes/cup boards etc with shelf and shutter full sized fitted under /above the kitchen cooking plateform and other plateform complete all as specified and directed

S&F 100mm long extruded brass handles, fabricated type polished complete all as specified and directed.

S&F 30mm width of flaps( when open) continous (piano) hinges, brass complete all as specified and directed.

Treatment of soil under existing floor using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar1:2 to match the existingfloors complete all as specified and directed.

Providing and injucting voids in masonary using chemical emulsion one litre per hole, at 300 mm intervels including drilling holes at 45 degree and replugging them witn cement mortar 1:2 to match the existing room complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles - 02 Nos, hinges - 03 Nos, sliding bolt - 01 Nos, tower bolt - 02 Nos in each door, powder coated aluminium snap beading, screws etc complete all as specified and directed.

Supply only 5.0mm thick prelam PVC sheet for fixing in alumiunum doors/ windows complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long - 01 Nos, hinges type B-21 100mm long - 02 Nos, suitable handle - 01 Nos etc complete all as specified and directed.

Supply only 5.0mm thick heat absorbing glass any size complete all as specified and directed.

S&F Powder coated aluminium ornamental grill 10 mm dia, 75 X 95 mm aperture fixed in powder coated aluminium snap beading complete all as specified and directed.

S&F stainless steel wire cloth, 0.254mm nominal dia of wire and 0.95mm average width of aperture and fixed with tinned tacks or galvanised wire staple etc complete all as specified and as directed.

Dismantling structural steel work including doors, gates, rolling shutter but excluding framed trucess etc complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with geusset plates, rails, braces grade E 250 Fe 410-W quality 'A' etc complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any guage, complete all as specified and directed.

S&F prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for preparation of old painted steel or iron based surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and dirceted.

M&L preparation of old painted steel and iron surface of any description not otherwise described over 10 cm width or girth and painting with one coat of synthetic enamel paint over priming with complete all as specified and directed.

B Kumar and Co