Rehabilitation works for 50 years Godowns and ancillary works all over at Tuticorin Town Warehouse

Amount

Dismantling, clearing away and carefully stacking materials useful for re-use of Asbestos sheet roofing without roor timbers / angles, stacked properly inside the campus as directed by the Engineer - Incharge.

Dismantling, clearing away and carefully stacking materials useful for re-use of brick masonry walls, depositing the debris in the low lying areas inside the campus as directed by the Engineer - Incharge.

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of P.C.C., depositing the debris in the low lying areas inside the campus as directed by the Engineer - Incharge.

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of R.C.C., depositing the debris in the low lying areas inside the campus as directed by the Engineer - Incharge.

Dismantling the existing damaged valley gutter, clearing away and carefully stacking materials useful for re-use for any thickness of R.C.C., depositing the debris in the low lying areas inside the campus as directed by the Engineer - Incharge.

Repairs to the existing damanged Roof trusses such as straightening the bend angles, removing and refixing in position, replacing the damaged bolts and nuts, welding the joints if any required etc.., and as directed by the Engineer-incharge complete complying with standard specifications.

Removing the existing manuallly operated Rolling shutter as per the instructions of the Engineer-Incharge etc.., the rate is iniclusive of labour charges for removing the rolling shutters etc.., complete complying with Standard Specifications.

Suplying and fixing ( under lintel grove ) cold rolled Rolling Shutters of approved quality of 18 guage 7.5cm wide cold rolled lathe section in one piece inter locked together with specially desinged pipe shaft with adquate number of high tensile steel wire springs of approved quality complete with brackets side guides and arrangements for inside and outside locking arrangements with push and pull operations and pulling back handle with all accessories in best workmanship and the entire shutter painted with one coat of redoxide primer and clear opening of 1.8m width, 2.60m height. The rolling shutter shall be provided with one pair of approved quality of ball bearing complete. Rolling shutter should confirm to I.S. 6248-1979 and should be got approved by the Construction Engineer before fixing. ( This specification consists of the following component materials required for erection of rolling shutter. 1) 18G 3" lathe section 1.90m long -- 29 nos. 2) 10G guide channel 2.6m long - 2 Nos. 3) 13G bottom plate for 1.80m long with angle. 4) M.S. Pipe 40mm dia 'C' class - 2m long. 5) 10SWG side plate 13"x12" - 2 Nos. 6) 2 SWG spring 3" bore 7) 'U' Clamp. 8) Ball bearing suitable for 2 1/2" pipe . 9) 18 SWG clip suitable for 4" lathe 10) 20 SWG M.S. Sheet. etc.., complete. The old Rolling shutter materials should be taken over by the contractor on buy back policy.

Repairs and servicing the Gear operated Rolling shutter of size 4.00 x 5.00m and replacing the Existing worn out spares like M.S tension spring, small lathe, empty pully and double ball bearing, locking arrangements and also servicing the gear box and shutter for smootheing function and pull operation etc., including cost of replacing materials labour charges etc complete complying with standard specification.

Repairs and servicing the Fixed and Swing Ventilators, Replacing the existing wornout fixtures, glasses, hinges etc.., the Rate is inclusive cost of materials and all labour charges for removing, refixing with necessary fixtures etc., complete complying with Standard Specification.

Repairs and servicing the Air Inlet Windows, Replacing the existing wornout fixtures, glasses, hinges etc.., the Rate is inclusive cost of materials and all labour charges forremoving, refixing with necessary fixtures etc., complete complying with Standard Specification.

Replacing the existing wornout damaged GI weldmesh with new of size 7.50 x 2.50cm of 10 gauge for Fixed and Swing Ventilators and Air Inlet Windows to avoid the entry of Brids, the weld mesh should be fixed withTeak wood reepers of size 50mm x 25mm for required length alround the FSV and AIW and the Rate is inclusive cost of materials and all labour charges for removing the Existing warnout wiremeshes etc., complete Complying with Standard Specification.

Removing the existing canopy roof trussess, altering and repairing to the required needs with existing angles as per the instructions of the Engineer-Incharge etc.., the rate is iniclusive of labour charges for removing the roof truss, repairing, altering and refixing in position etc.., complete complying with Standard Specifications.

Removing the esisting purlins of size 100 x 50 x 6mm of MS Channel, refixing the same in position after the canopy trusses have been fixed as per the instructions of the Engineer-incharge, the rate is inclusive of labour charges for removing and refixing in position with necessary bolts and nuts etc.., complete complying with standard specifications.

Labour charges for servicing and fixing in position the existing Fixed and Swing Ventilators of size 1.20m x 0.60m to original position, the rate is inclusive cost of materials and all labour charges for removing the Existing warnout wiremeshes etc., complete complying with Standard Specification.

Earth work excavation in all soils and sub-soils and to full depth as may be directed except hard rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification etc.., complete. (For narrow excavation)

Supplying and filling foundation and basement etc.., with Crushed Stone (M.sand) in layers of not more than 15cm thick well ramed consolidated etc., complete complying with standard specification and as directed by the Engineer-incharge.

Earth work in all soils except hard rock requiring blasting and conveying and spreading surplus earth with a lead of 0 to 100 metre deploying earth moving machinery and tippers, breaking clods, sectioning, levelling the site etc., complete

Plain Cement concrete 1:5:10 ( one cement, five M.sand and ten stone jelly) using 40 mm jelly cost and conveyance of all materials and labour charges for laying curing etc for base course including compacting with platform vibrator laid in layers of not more than 15cm thick and consolidated etc.., as per standard specification and as directed by the departmental officers etc.., complete.

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)

For plane surfaces such as coloumn footing, bed block, plinth beam, grade beam etc.

For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

For plane surfaces such as rectangular or square columns sun shade, etc.

Reinforced Cement Concrete 1:1-1/2:3 (One Cement, One and a half M. sand and Three stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc.., complete complying with standard specification and as directed by the departmental officers

For Foundation & Basement

For Super Structure in Ground Floor upto 4.50m height.

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam with specified thickness and as per standard specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base / Base course on well prepared surface and compacting with vibratory roller to achieve the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc.., complete as per clause 406 of MORTH Rev-5.

Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for flooring and wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

Brick Work in C.M 1:5 (one cement, Five M.sand) mix using II class chamber burnt Ground Moulded bricks of size 9" x 4 3/8" x2 3/4" / Fly Ash bricks of size 230 x 110 x 70mm including scaffolding, curing etc., complete complete complying with standard Specification.

For Foundation and Basement

For Super Structure in Ground Floor

Supplying and fabrication of MS Mild Steel Gate with two leaves of total size 4.88m x 1.83m of with 75x50x3.2mm MS Tube and intermediate support with 50x25x3.2mm MS Tube at 150mm c/c with necessary Hinges, Locks, Brackets, Tower bolts etc., Complete with Standard Specification.

Supplying, assembling fabricating and errecting the purlin for Extension of Eaves on Gable wall side of godown using with 100x50x3mm MS Rectangular Channel and 100x50mm MS rectangular channel for closing the end of Purlin etc.Complete Complying with Standard Specification.

Providing two legged scaffolding using 13-15cm dia casuarinas post of 4m over all length (3m length + 0.5m projection + 0.5m into the ground) the distance between two rows being 1.5m and the spacing of the post being 2.0m in both rows with two horizontal posts with 0.5m.overlap on either side and braces at 2.0m center to center including longitudinal and transverse middle braces to step and providing platform with country wood planks of 40mm thick and 1m width etc., complete complying with standard specification. (upto 8.00m height)

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers.

Plastering with Cement Mortar 1:5 (One cement and Five P.sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Providing and fixing colour coated galvalume profile sheets (Make- TATA/JSW) with the depth of 30 mm and pitch of corrugation 200 mm (Colour and shape of profile as approved by the Engineer-in-charge), 0.47 mm (TCT) total coated thickness (tolerance as per relevant IS code), material yield strength 550 MPa, galvalume AZ-150 GSM (both side inclusive) with regular modified polyester paint and coating of 20-25 micron RMP on exposed surface including primer and 7-10 micron epoxy coating on unexposed surface including primer. The sheet should be supplied in single length as shown in drawing or as desired by Engineer in charge and shall be fixed using stainless steel Hex cap headed self drilling/ tapping stainless steel screws M6, 65 mm long with 3 mm thick EPDM seal and Stainless steel stitching screw of size 19X2.5 mm excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. All screw should be sealed with silicon sealant. (The contractor should take over the AC sheets on buy back policy)

Supplying and fixing corrugated Poly Carbonate Sheet of size 3.00m x1.06m of 6mm thick on the roof in-between the colour coated Galvolume sheets for proper lighting with necessary screws and EPDM rubber washers etc.., complete complying with standard specification and as directed and specified by the departmental officers including cost of loading, unloading and transportation charges etc., complete complying with standard specification.

Providing anchorage arrangements to the ridge sheet using MS flat of size 40mm x 6mm including cost of materials such as MS flat, self threaded screws with bushes, labour charges for cutting drilling and fixing in position etc.., complete complying with standard specifications.

Supply, erection testing and commissioning of submersible pump of 5HP rated 3 phase 415V 50Hz 2880RPM Electrical motor, the pump with cast iron bronze impeller, rope gland packaging, suction of size of 80mm dia delivery size of 65mm dia including the cost of Panel Board and allied accessories etc.., complete complying with standard specifications.

Supplying and fixing in position best approved of BIS quality PVC pipes having the pressure of 6 kg. / sq.cm including special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cost of removable stainless steel grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC pipes, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Engineer-incharge before use on works).

110mm dia PVC Elbow

110mm dia PVC Bend

110mm dia PVC Shoe

Supplying and fixing in position 100 x 50 x 7.5 mm @ 9.4 kg. channel for the face of RAT GUARD LEDGING slab with MS bolts 16mm dia 45 cm long at 2m centres forming protection to the loading platform finishing in fllush with the slab.

Painting old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour with synthetic enamel paint over the existing old paint after thorough scrapping in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Engineer-incharge before use on works.)

Painting old wood work with two coats of best synthetic enamel paint of approved quality, colour including thorough scrapping and preparation of surfaces (the colour and quality should be got approved by the Engineer-incharge before use) the rate includes cost of brushes, high scaffolding charges, finishing neatly etc., complete complying with standard specification and as directed by the Departmental Officer.

Supply and fixing first quality Country wood frames for door, windows, ventilators and other simillar joinery works with the required sizes and sections including labour charges for wrought and put up in position and also for fixing holdfast in frames and masonry etc.., complete complying with standard specification.

Painting two coats of plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Engineer-incharge before use on works.

PVC pipe of 32mm dia

PVC pipe of 25mm dia

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Engineer-incharge before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

110 mm dia PVC pipe.

75 mm dia PVC pipe.

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes of 110mm dia having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, stainless steel gratings and special clamps, brass screws, nails, etc., and fixing of stainless steel gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removablestainless steel grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC pipes, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Engineer-incharge before use on works).

PVC 110 mm dia Elbow

PVC 110 mm dia Door Elbow

PVC 110mm dia Door Tee.

PVC 110 mm dia Bend

PVC 110 mm dia Tee

PVC 110mm dia Shoe

PVC 75 mm dia Door Elbow

PVC 75 mm dia Elbow.

PVC 75 mm dia Tee

Supplying and fixing position CI Nahani Trap / Floor Trap of 100 x 75mm size with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Engineer-incharge before use on works)

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve 32mm dia with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Engineer-incharge before use on work.

Supplying and fixing in position 15mm dia brass CP Screw down tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Engineer-incharge before use on the works)

Supplying and fixing in position 15mm dia brass CP Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Engineer-incharge before use on the works)

Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes of 160mm dia having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, stainless steel gratings of 160mm diameter and special clamps, brass screws, nails, etc., and fixing of stainless steel gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cost of removable stainless steel grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

Providing Soak pit arrangements for filtration of waste water and rain water to save the Ground water using 6 Nos. of RCC ring of 900mm dia, filling the pit with 40mm metal, 20mm brick jelly and sand filling to the required depth as per site condition including necessary earthwork to errect the RCC ring and top should be covered with RCC cover slab of 1.00m dia. The rate including the cost of all materials and labour charges etc., complete complying with standard specifications and as directed by the Engineer-incharge.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Engineer-incharge before use on works.)

Providing expansion joint at 5mtr intervels across the platform by cutting 6mm wide and full depth of concrete by contractos own mechanical means and filling the gap with polysulphide sealent and adding admixtures recron 3s for crack free construction at the rate of 125 gms pack per 50 kg of cement with all lead, lift and other incidental works etc complete and as directed by Engineer-incharge..

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with crushed stone sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position white glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Engineer-incharge before use on works)

Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm (without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Engineer-incharge before use on works).

Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Engineer-incharge before use on works)

Preparation of stack plan by using two coats of emamel paint having width of 100mm including cleaning the surface, marking with templates, the rate is inclusive of all abour charges and all materials cost and all other incidental expenses etc.., as per standard specification.

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil pipes dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Engineer-incharge before use on works).

PVC 32mm dia. Elbow.

PVC 32mm dia. Tee

PVC 32mm dia. Bend

PVC 32 x 25mm dia.Reducer.

PVC 32mm dia. Coupling

PVC 25mm dia. Elbow.

PVC 25mm dia. Tee

PVC 25mm dia. Bend

PVC 25mm dia. Coupling

PVC 25 x 20mm dia.Reducer.

Clean removal of Cement plaster from walls and clearing away and depositing the debris in the low lying areas inside the campus as directed by the Engineer-incharge.

Plastering with Cement Mortar 1:5 (One cement and Five P.sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing of MS angle of size 50x50x6mm of length 1.20m cut and bent to shape and fixing in postion with cement concrete 1:2:4 for tying the 2 ply bared wire and painting thw angle with two coats of aluminium paint over one coat of redoxide primer etc complete complying with standard specifications.

Supplying and fixing in position of 2 ply 10 gauge four pronged Galvanised bared wire with the existing "L" angle placed above the compound wall horzontally 5 rows and Vertically at a spacing of 0.30m and tying with the angle togother by GI binding wire etc.complete complying with standard specifications

Supply and Delivery fabrication of MS windows with outer frame and shutter frame in MS angle size 40mm x 40mm x 6mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over one coat of red oxide primer including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete. ( Fully panelled Double leaf - Window size 1.20 m x 0.90 m ).

Supply and Delivery fabrication of MS doors with outer frame and shutter frame in MS angle size 40mm x 40mm x 6mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over one coat of red oxide primer including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete.

Fully panelled Double Leaf Door - 1.00m x 2.10m

Fully panelled Single Leaf Door - 0.90m x 2.10m

Sub total

GST in 18%

BHAKIYA ASSOCIATES (BID ID -1418550)