Estimate for Construction of Head Regulator of New Tarmala Link Channel off taking at RD 76000/R of Lambi Distributary

Providing and laying of boulder apron laid in wire crates made with 4mm dia GI wire confoming to IS: 280 & IS:4826 in 100mm x 100mm mesh (weaved diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 18 kg, Including excavation for trimming for prepration of bed Boulder Apron Laid in Wire Crates. Item no 22.23 a

R.C.C.M-25 height upto 5 mtr with batching plant transist mixure and concrete pump (CSR Item no: 21.32 f/a/i).

PCC M-10 Cement Concrete in Sub Structure Complete as per drawing and technical specifications using mixture (CSR item no. 21.32)

R.C.C. M-20 height upto 5.0m by using concrete mixture (CSR Item no: 21.32 (E/a/i).

Sand Filling in Foundation Trenches as per Drawing & Technical Specification 21.3

Providing and laying 75mm Wearing coat consisting of 50 mm thick bituminous concrete CSR no 24.21 A

Providing and laying 75mm Wearing coat consisting of 25 mm thick mastic asphalt including tack coat .

Plain/Reinforced cement concrete in substructure complete as per drawing and Technical Specifications A PCC Grade M15 csr no 21.32a

Furnishing and placing reinforcement / prestressed cement concrete RCC Grade M-30 for solid slab by using concrete Mixture ht.upto 5 m as per Drawing and Technical specification including shuttering & centering (CSR item no. 22.1 (c (i) )

Furnishing and placing reinforcement / prestressed cement concrete RCC Grade M-40 for solid slab by using concrete Mixture ht.upto 5 m as per Drawing and Technical specification including shuttering & centering (CSR item no. 22.1 (e (i) )

Furnishing and placing reinforcement / prestressed cement concrete RCC Grade M-25 for solid slab by using concrete Mixture ht.upto 5 m as per Drawing and Technical specification including shuttering & centering (CSR item no. 22.1 (B (i) )

Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete (CSR item no. 18.18)

Excavation in soil using hydraulic excavator and hydraulic tractor trolley i/c cutting and loading in trolley and transporting to embankment location with combined lead 450 metres with all leads and lifts CSR item no 19.38a,b,c

Filling Empty cement bags with good earth and laying in position in wet condition including supply and carriage of Ec bags and good earth and cost of material such as string etc complete in all respect ( for bundh) (CSR item no. 23.27)

Filling Empty cement bags with good earth and laying in position in dry condition including supply and carriage of Ec bags and good earth and cost of material such as string etc complete in all respect ( for bundh) (CSR item no. 23.26)

Dismentling of Brick Masonary in 1:3 CSM (CSR Item No. 8.5 (b) )

Dismantling of coping Csr no 8.6 b

Excavation in soil (any type) using hydraulic excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity i/c cutting trimming bottom and side slopes, in accordance with requirements of lines, grades and cross section i/c all lifts and combined leads up to 30mtr.(CSR Item No. 6.19)

Rehandelling of earth work dully dressed with lead 30 mtr.

Extra for compaction of earth including laying earth in 20 cm layers , watering and rolling in specification. (csr no 24.5/b)

Dressing of bed/Side slopes and prepration of sub grade for lining complete in all respect as per PWD specification and instruction of engineer in charge.(csr no 19.2)

Providing Tractor 24 HP for running 4 x 4 inch pumping sets for open dewatering

Providing, Running and maintenance of pumping set 8 H.P./ Generator set for dewatering arrangements complete in all respects. (As per Dewatering Plan attached) (CSR Item No. 25.4)

Making bore and installation of pumping set for dewatering arrangements complete in all respects. (CSR item no: 25.5) as per Dewatering Plan attached)

Providing and Fixing 65 dia GI pipe

Providing and Fixing M S Plate 12 mm Thick

Providing and Fixing M S Plate 10 mm Thick

Providing and fixing clamp plate MS Flate 50x10 mm

Providing and fixing clamp plate MS Flate 70x10 mm

Providing and Fixing M S Plate 8 mm Thick

Providing and Fixing M S Plate 20 mm Thick

Providing and Fixing Anchors

Providing and fixing ISST 200 mm

Providing and fixing ISMB 250 mm

Providing & Fixing of S.S Plate 10mm

Providing & Fixing of S.S Plate 8mm

Providing and fixing ISMC 200 mm

Providing and Fixing M S Plate 15 mm Thick

Providing and Fixing M S Plate 16 mm Thick

Providing and Fixing SHS 150 x 150 x 6 mm

Providing and Fixing Stiffner Plates 6 mm

Providing & Fixing of Chequred Plate 6mm thick

Providing & Fixing of Chequred Plate 8mm thick

Providing and Fixing SHS 60x60 x 6 mm

Providing and Fixing ISA 55*55*6

Providing and Fixing ISA 65*65*6

Providing and Fixing GI pipe 50NB

Providing and Fixing anchor plate for stairs 16mm

Providing and fixing ISMC 150 mm

Providing and Fixing SHS 40x40 x 6 mm

MS housing cover with worm and worm wheel assembly shaft handle gun metal bush with triple start treading inside complete in all respect 1.5 tonne capacity

Providing and fixing Skin plate 10mm thick

Providing and fixing Wedge type bottom seal 10mm

Providing and fixing Square bar 25*25

Providing and fixing seal 44dia 10mm thick

Providing and fixing corner seal 44dia 300 x300 mm 100 mm wide

Supply of spindle for hoist machanism including threading and machinning complete in all respects and to entire satisfaction of Engineer in charge 55mm dia

Supply and fixing of spindle cover

Supply of synthetic grease

Supply of Diesel

Supply of Mobile oil

Dismantling of Spindle Hoist Machine at site complete in all respects.

Dismantling of the other mechanical structure

Fixing and Holding the gate with the help of 35 tonne capacity crane.

Commisioning & testing of Gates at site complete in all respects and to entire satisfaction of Engineer In charge.

Providing and fixing hooke plate

Hooke pin 20mm dia 150 length

Supply and fixing of Common Shaft duly machined at site complete in all respects and to entire satisfaction of engineer in charge

Fixing of coupling for common shaft with supply of Spindle shaft coupling rods and cover complete in all respect and to entire satisfaction of Engineer In charge.

Painting of gate leaf with primer coat and two coats with Anti corrosive Bitumastic paint to give an even shade with special quality paint.

Painting two coats with ready mix synthetic enamel paints over one coat metal primer

Material Testing Charges

Measurement and Disposal Charges of items removed

Supplying fitting and placing HYSD bar reinforcumecement in sub structure complete as per drawing and technical specifications

Supply providing ad fixing of MS Bolts & Nuts ( for seals of all types) wit washer of all sizes and length required as per sample/drawing/direction of Engineer in charge complete in all respects

Fillet welding with high strength steel rods complete in all respects (6 mm)

Any other item

Dinesh Kumar Garg Contractor (BID ID -628595)