Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.0 LAccepted-AOC RANGIYA DIST KAMRUP ASSAM 781365 | BAKSA | ASSAM | 781365 | L1 | Accepted-AOC ok | |
| 2 | L2₹12.0 LSame as L1Rejected-Finance B 150 GROUND FLOOR BACK SIDE PANDAV NAGAR DELHI 110092 | DELHI | EAST DELHI | DELHI | 110092 | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹14.0 L+₹2.0 L (16.3%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹14 L
EMD Value
₹28,000
Closing Date
4 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF BIHTA
AIR FORCE STATION BIHTA - 801103
PROVN OF WORK SERVICES FOR DISPLAYING VINTAGE AIRCRAFT AT AF STN DARBHANGA UNDER GE (AF) BIHTA
2023_MES_621562_1
8354/BHT/DBG/E8
Open Tender
Civil Works
Item Rate
120 days
Darbhanga
CLASS E CATEGORY a(i)
6 documents required · 6 mandatory
₹500
GE (AF) Bihta
₹28,000
Yes
29 Nov 2023
4 Oct 2023
13 Nov 2023
4 Oct 2023
4 Nov 2023
18 Oct 2023
5 Oct 2023 - 11 Oct 2023
Amount
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil, complete all as specified and directed.
Excavation over areas not exc 1.5 m deep and getting out in soft/loose soil, complete all as specified and directed.
Excavation over areas exc 1.5 m but not exceeding 3.0 m deep and getting out in soft/loose soil, complete all as specified and directed.
Excavation in trenches not exc 1.5 m wide and not exc 1.5 m deep for foundation etc or for shafts, column footings or for laying cables etc not exc 10 Sqm on plan and getting out in soft/loose soil, complete all as specified and directed.
M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregates) as in foundation filling and mass concrete, complete all as specified and directed.
M&L brick work with pulverized fuel Ash-lime bricks (old size fly ash bricks), straight or curved on plan exc 6 m mean radius, built in CM 1:6, complete all as specified and directed.
M&L for MS TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and incl mild steel wire (annealead) not less than 0.9mm dia, complete all as specified and directed.
Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc, complete all as specified and directed.
M&L for RCC Nominal Mix 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.
M&L for RCC Nominal Mix 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in Columns, pillars, piers, posts and struts, complete all as specified and directed.
Use and waste of formwork rough finished surface to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified and directed.
Use and waste of formwork rough finished to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed.
Returning, filling in, including spreading, levelling, waterning and well ramming in layers not exceeding 25cm thick, complete all as specified and directed.
Removing excavated material (soil) not exc 50 m distance and depositing where directed at a level not exc 1.5m above the starting point, complete all as specified and directed.
Forming emankments including raising (or lowering) earth, spreading in layers n exc 30 cm thick watering, ramming/rolling and finishing to required size shape etc n exc 1.5m high from base, complete all as specified and directed.
M&L steel work in posts, purlins, crane gantries rails and fastenings and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces cleats etc Fe-410 W, complete all as specified and directed.
S&F mild steel screw rag or lewis bolts exc 15cm and not exc 30 cm long dia of neck 25mm with hexagonal or square nut and washers and the other end enlarged and jagged or lewised embedded in RCC column during casting, complete all as specified and directed.
S&F rolled mild steel as in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, conforming to Fe 410-W (Gde-E- 250) quality - A, complete all as specified and directed.
M&L for preparing new steel surfaces of any description not exceeding 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, complete all as specified and directed.
M & L for hard core (broken bricks) of gauze n exc 63mm deposited, spread in layers n exc 15cm thick, watered and rammed to a true surface, complete all as specified and directed.
M&L 15mm thick screed in CM 1:6 on brick or concrete surfaces for fixing of tiles as in floor, complete all as specified and directed.
M&L chequered cement concrete tiles 20 cm x 20 cm by 25 mm thick, set, jointed and pointed in neat cement slurry, with grey cement and pigments as in floors, complete all as specified and directed.
M & L for 100mm PCC 1:3:6 type C2 (using 40mm graded stone aggregates) as in as in sub floors, sub bases, floors and pavings etc, complete all as specified and directed.
M&L 10mm thick rendering on fair faces of brick masonary or concrete surfaces in CM 1:4, finished fair and even, complete all as specified and directed.
M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, complete all as specified and directed.
M&L Granite (of any type) tiles 20mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, complete all as specified and directed.
M&L rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed.
S&F sheet metal enclosures (MCB Distribution board) when MCB’s to be used, single pole and neutral, 4 ways, 220 volts with 200 amps rated bus bar, double door with bus bar neutral link earth bar, Din rail, necessary blanking plated, including fixing DB flush in wall complete with making good disturbed surfaces and colour matching, complete all as specified and as directed.
S&F MCB’s single pole and neutral, 10 KA, 63 Amp 240 Volts and of ''C'' series with required wiring connections and lugs etc and erecting in provided enclosure/distribution board. MCBs shall be of current limiting type, ISI marked conforming to IS 8828-1996, complete all as specified and as directed.
S&F MCB’s single pole, 10 KA, 6 to 32 Amp 240 Volts and of ''C'' series with required wiring connections and lugs etc and erecting in provided enclosure/distribution board. MCBs shall be of current limiting type, ISI marked conforming to IS 8828-1996, complete all as specified and as directed.
Supply and laying XLPE insulated, armoured heavy duty electric under ground cable with aluminium conductor, 1100 volts grade, cross sectional area 6 sqmm 4 core, including necessary cable lugs, bolts, nuts and washers, complete all as specified and directed by Engineer-in-Charge.
Supplying and laying pulverized fuel Ash-lime bricks (Fly ash bricks - non modular size), laid flat adjoining each other perpendicular to the direction of cable as in protection to UG cables, complete all as specified and directed.
Supply, lay / spread in trenches, River sand, clean including spreading, levelling, punning for laying/cushioning of cables, complete all as specified and as directed.
Supply and fixing LED flood light fitting 70W, 230V AC, outdoor type with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant, complete all as specified and directed.
Material and labour for sub main wiring with 2.5 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 2.5 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade, ISI marked complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing surface, complete all as specified & directed.
PAPPU ROY CONSTRUCTION
G S CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .