SPL REPAIR TO BLDG NO. T-106,T-108,P-08 OF 40 FD REGT AND PROVN OF PARKING SHED (CAR PARKING,SCOOTER SHED) FOR ADM BLDG OF HQ 8 INF BDE AT MIL STN BIKANER UNDER GE (N) BIKANER.

Demolition Stone slabs of any description or thickness in roof ,sun shades, Chajjas, floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed. (Note: Dismantling shall be carried out in portion only .)

Dismantling Brick tiles or terracing tiles,single layer on roofs complete all as specified and directed.

Demolition of lime Concrete to any thickness in any position incl all topping thickness (below or above ground level) complete all as specified and directed.

Demolition cement concrete unreinforced of any description and in any position not otherwise specifically provided complete all as specified and directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including any tiles and raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and directed.

Taking down shutter exc 1 sqm and n exc 2 sqm each and refixing in the same opening after rescuring or easing & adjustment complete all as specified and directed.

Demolition of brick/stone masonry built in CM complete all as specified and directed.

Dismantling cast iron /PVC pipes fixed to walls or laid in trenches in any position complete all as specified and directed.

Dismantling Asbestos cement( Corrugated,semi corrugated, etc.) sheet in roof covering including ridges complete all as specified and directed.

S&F for Pre Painted Galvalume aluminium zinc coating GI based corrugated steel Sheet 0.50 mm thick of any colour having tensile str 550 Mpa as in roof covering /cladding to wall and fixed with self tapping screws as per manufacturers instruction (design and colour as app by GE) complete all as specified and directed.

S&F for Pre Painted Galvalume aluminium zinc coating GI based Plain steel Sheet 0.50 mm thick of any colour having tensile str 550 Mpa as in roof covering /cladding to wall and fixed with self tapping screws as per manufacturers instruction (design and colour as app by GE) complete all as specified and directed.

Dismantling timber scantling 40 sqcm and over in section, in any position complete but unframed structure. complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete including loosning of bolts , cutting rivets and taking down carefully complete all as specified and directed.

M&L for steel work in tubular trussess/ purlins incl spl shaped washer etc. using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240. complete all as specified and directed.

M&L framed brackets of angles or tees with web and flanges cut to shape, drilled and countershunk for screw, including bending and welding angles, as necessary, gusset plate, riveting, etc. n exc. 10 kg brackets, confirming to Fe. 290 Gde -E-165 complete all as specified and directed.

S&F Mild steel bolts.exc. 5 cm length not exc. 10 cm length (machine made) with hexagonal or square heads at one end and screwed the other , or screwed both ends, each screwed end to be fittied with washers and one hexagonal or square nut 5 to 10 mm neck dia complete all as specified and as directed by engineer-in-charge.

S&F Composite Cement Ceiling board 4 mm thick in ( 595 mm X 595 mm ) pannel (Make-Everest Ramco or equivalent.) designer ceiling pre finished conforming to IS 14862 type B category three incl powder coated GI frame , grid work, hold fast,suspended with suspender along with holding down bolt etc. all necessary arranements including dismantling of existing wall and false ceiling boards ( fibre,pulp, insulation etc.) or insulation boards/slabs/blankets,any thickness including cover filletes etc complete all specified and directed.

M&L Brick work with fly ash bricks straight or curved on plan to any radius built in CM 1:6 all as specified.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair complete all as specified.

M&L for rendering 15 mm thick in two layers on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specifed and directed. Note:Ratem of Water proofing compound deemed to be included in qouted rate.

M&L for rendering 10mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement all as specified.

M&L for rendering 5 mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement all as specified.

M&L vitrified ceramic coloured tiles light shade 7 to 8.5 mm thick (Square/ rectangular ) polished in floors ,area of each tile n.exc. 0.36 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles, over and including 15 mm thick screed plaster in CM 1:6 including dismantling of floor, hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L vitrified ceramic coloured tiles light shade 7 to 8.5 mm thick (Square/ rectangular ) in skirting ,dados etc. area of each tile n.exc. 0.36 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match, over and including 10 mm thick screed plaster in CM 1:4 including dismantling of floor, hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for providing 75 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection finished even and smooth without using extra cement

Cutting chases,pinning in making good to facing where requried and pointing in cement mortar 1:3 to ends or edge of landings,steps,cills,sunshade,shelves, lintel etc. tubes or concealed conduit etc. and making good, cutting not exc 10 cm girth

M&L Jodhpur stone of roof slabs, self faced 7.5 cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in lime mortar 1:3 or cement mortar 1:6 complete

M&L 20-25 mm thick Sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4, complete al as specified.

M&L for flush pointing in cement mortar 1:3 on ceiling surfaces of stone patti roofs including raking out joints/pointing to brick work or stone patti ceiling laid flat in lime concrete complete all as specified and directed.

M&L for 50 mm thick PCC 1:3:6 20 m graded stone aggregate type C-1 using 20mm graded crushed stone aggregate as in levelling course for roof etc complete all as specified

S & F Mild steel framed work such as grills, gratings, tank staging,Iron girder etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks, cooler stand and similar work conforming to Fe 290 Gd E-165 complete all as specified and directed.

M&L for roof treatrment carriedout all as specified and directed as under:- (a) Cleaning of surface of loose dust and grit and cement slurry etc. by means of wire brush dust removing and scrapper etc, Pot holes/cracks shall be repaired with cement admixed with polymer as per manufacturer instructions (b) The surface shall be treated with PU Elastoseal primer with Epoxy primer to seal the pores and enhance the adhesion of the coating,supplying and applying single component waterproofing liquid membrane based on pure, elastomeric, polyurethane resin cold applied of spray/brush applied membrane with an elongation of (650%+,- 50 ) and tensile strength not less than 2 Mpa ,crack bridging ability not less than 2 mm. No leakage upto 5 bars of water pressure. shore hardness > 50 shore. The Minimum thickness to be applied shall be 1.5 mm, ( overall ) in two layers (each layer 750 micron) or as per manufacurer's instructions so as acheive thickness not less tha 1.5 mm (c) Providing and laying of protective Geotextile fabric 150 GSM over the entire membrane with proper overlaps of 75 mm before laying SRI Roof tiles (d) Providing and laying SRI (Sun Resistance Index ) roof tiles (size 300x300x9-10 mm) with 20 mm thick cement plaster in CM (1:4) mixed with and including cost of liquid WPC as per manufacturer's instructions confirming to required slope Note :- For Roof Treatment process Make of PU Primer /Membrane :- SIKA/BASF, BERGER/STP FOSROC/ SAINT GOBIN /PIDILITE

S&F for factory made single extruded WPC ( Wood polymer composite) solid door /window/ceosetory windows& other Frames/Chowkhat of size 65x100 mm compraising of virgin PVC polymer of K value 58-60 ( Suspension grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum,screw withdrawal strength of 2200 N(face) & 1100 N ( Edge),minimum compressive strength of 58 N/mm2,modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fastners of required dia and length complete all as specified and directed. ( MS holdfast / lugs dash fastners shall be included in unit rate of item). Note:- For WPC solid door/window frames,minus 5 mm toletance in dimension i.e. depth and width of profile shall be acceptable .Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F for factory made single extruded WPC ( Wood polymer composite) solid plain flush door shutter of size 30 mm thick compraising of virgin PVC polymer of K value 58-60 ( Suspension grade),calcium carbonate and natural fibers (wood powder/rice husk/wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) having minimum density of 650 kg/cum,screw withdrawal strength of 1800 N(face) & 900 N ( Edge),minimum compressive strength of 50 N/mm2,modules of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixing with Stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws ,complete all as specified and directed. Note:- SS butt hinges and SS screws shall be included in unit rate of item.

S&F for 100 mm Stainless steel Butt hinges complete all as specified and directed.

S&F for 150mm Stainless steel handles complete all as specified and directed.

S&F SS sliding door bolt, length 250 mm nuts and washers complete all as specified and directed.

S&F for 150mm size Stainless steel barrel tower bolts complete all as specified and directed.

S&F factory made mild steel Window/Ventilator box type with side huge shutters incl pintol hinges,steel handles, steel peg stay and all locking arrangement and one shop coat of red oxide primer complete all as specified and directed. Note : i) The window shall be fabricated as per Drg No CEBTZ/TD/888R & 889 ii) MS fillets, glazing, wire gauge shall be measured and paid separately iii) opening incl provn shutter for cooler to be provided as directed

S&F Powder coated Aluminium frame door, window ,ventilator frames/shutter ,other sections for doors , windows , ventilators with one or more rebates , channel for sliding shutters , grills etc including jointing cleats for fixing etc , complete all as specified and directed.

Hacking out old broken glass (any thickness ,size quality or description) from wooden/metal frame including punching or drilling out old glazing pins/spring clips glazed with putty and removing materials from site of work complete all as specified and directed.

S&F sheet glass 4.8 mm thick ordinary quality & glazing with rubber gasket in squares exc 0.5sqm in each pane as in aluminium door complete all as specified and directed.

S & F aluminium glazing clip with rubber gasket of suitable size and thickness as required at site for fixing glass in aluminium door/windows complete all as specified and directed.

S & F for door closer hydraulically regulated , designation No 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 KG complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares n exe 0.5 sqm each pane complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and avg width of aperture1.40mm complete all as specified and directed.

S&F in repair 20 mm dia mild steel curtain rod chromium plated incl brackets, stops etc. complete all as specified and directed.

S & F PVC(SWR)single socketed in any length with rubber ring joint fixed with wall of 110mm complete all as specified and directed.

S & F PVC(SWR) bends any radius 110mm bore complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width & girth & applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width and grith and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old surfaces plastered or unplastered ,brooming down or steel wire brushing etc and applying one coat of oil emulsion distemper/OBD of approved tint on old decorated surfaces of walls include comices by using roller/spray machine over avg 2 mm thick wall care putty as desired smoothening of surfaces complete all as specified and directed.

M&L for preparation of new surfaces plastered by brooming down or steel wire brushing scraping down oil & greasy spots etc applying one coat of priming with chalk whitning and applying two coats of acrylic distemper/OBD paint of approved tint over avg 2 mm thick wall care putty over new plastered surfaces etc complete all as specified and directed.

M&L for preparation of new surfaces plastered by brooming down or steel wire brushing scraping down oil & greasy spots etc and applying one coat of priming with chalk whitning, and applying three coats white wash on ceiling of approved tint over new plastered surfaces etc complete all as specified and directed.

M&L for preparation of old surfaces plastered or unplastered , brooming down or steel wire brushing etc and applying one coat of white wash on old decorated surfaces of ceiling include cornices complete all as specified and as directed .

M&L for preparation of new surfaces plastered by brooming down or steel wire brushing scraping down oil & greasy spots etc applying one coat of priming with chalk whitning and applying two coat of exterior acrylic emulsion paint (weather coat )of approved tint over new plastered surfaces etc over a coat of putty complete all as specified and directed.

M&L for for complete removal of existing treatment on walls etc, by scraping, sand papering or by using mechanical sander and preparing plastered surfaces and applying one coat of exterior acrylic emulsion paint (weather coat ) of approved tint on walls over a coat of wall primer and a coat of putty by using roller/spray machine complete all as specified and directed.

Surface dressing not exe. 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in post holes (or similar holes) in loose/ soft soil each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exeeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and directed.

M&L for preparation of new plastered surfaces plastered by brooming down or steel wire brushing scraping down oil & greasy spots etc and applying one coat of primer, and applying three coats white wash of approved tint over new plastered surfaces etc complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer as per manufacturer's instructions complete all as specified and directed.

M & L for plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including sub base of floors etc. complete all as specified and directed.

M&L for 40 mm thick cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregate,in flooring/hardstanding laid in alternate panels incl all necessary formwork and vibrator to be used finished surface even and smooth without using extra cement complete all as specified and directed .

M& L for plastic dividing strips , 1.5 mm thick and 38 mm width and inserted in position to confirm to design complete all as specified and directed .

M&L Forming 12mm thick expansion joint filled with pre-formed bituminous filler and top 30mm primed and sealing compound grade 'A' in concrete slab upto 100 mm thick complete all as specified and directed .

M&L for sand filling under floors, cushning under interlocking tiles or in foundations incl watering and consolidations complete all as specified and directed.

M&L 60mm thick machine pressed precast concrete interlocking paver block any shape and size of grade M-35 confirming to IS 15658-2006 with grey cement and no pigment laid over sand cushioning complete all as specified & directed.

Taking down carefully (aluminium) point wiring complete of any type (batten/ surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as spcified and directed.

Taking down old U/S existing DB TPN 4 way & DB SPN 8 way including MCB/MCCB/Industrial plug socket of any capacity and any size and removing from site and making good the disturbed surface of wall etc complete all as specified and as directed.

Ditto all as per item no-75 above but for One 3 pin 5 Amps Socket outlet on same board.

Ditto all as per item no- 75 above but for One 3 pin 5 amps socket on independent board.

Ditto all as per item no- 75 above but with 2.5 Sqmm copper wire for 3 pin socket outlet 15 Amp on independent board complete and all as directed.

S&F switch Modular type, 6 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and directed.

S&F switch Modular type, 16 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and directed.

S&F socket outlet 3 Pin 6 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed.

S&F socket outlet 3 Pin 6/16 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed.

S&F ceiling rose, surface backelite , three terminal AC, 230 volt complete all as specified and directed.

Supply and fixing fan step regulator modular type,120W -2 module electronic socket type five step controlled 230V AC 50 Hz for complete all as specified and directed.

S&F LED tube light fitting, 1x 20 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed .

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fixing LED Bldg Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F sheet metal enclosures MCB DB, double door,Vertical TPN 4 way with 200 Amps rated busbar complete all as specified and directed.

S&F double door, sheet metal enclosure, power coated for MCB DB SPN 12 way fitted with neutral link,earth bar,din rail and 200 amps rated bus bar 230 volt confirming to IS 13032-1991 complete all as specified and as directed .

S&F double door, sheet metal enclosure, power coated for MCB DB SPN 8 way fitted with neutral link,earth bar,din rail and 200 amps rated bus bar 230 volt confirming to IS 13032-1991 complete all as specified and as directed.

S & F MCB SPN, 5-32 Amps, 240 volts, breaking capacity 16KA complete all as specified and as dircted .

S & F MCB SP, 5-32 Amps , 240 volts, breaking capacity 10KA complete all as specified and as dircted.

S & F MCC 63 amps,4 pole,415 volts,fixed type breaking capacity 16KA complete all as specified and as dircted.

Supply and hanging/fixing ceiling fan 1200mm sweep AC supply (input voltage range 120 to 280v), BLDC type, 5 star rated BEE and ISI marked, super enameled copper winding of 'B' class insulation, single phase 20 watt (+ 10%), PF 0.90 (MIN), air delivery of 220 CUM per min (CMM), 350 RPM (+ 10%), TEMP RISE 40 DEGREE MAX, without remote, with electronic regulator, 3 blades, down rod including accessories, total harmonic less than 10%, 5 speed, hanging in position, including making connection wih and including flexible cord twin core twisted copper conductor of size 23/0.0076 from cealing rose to fan including Taking down fan,sealing cable end,dismantling blades and removing fan and blades and deposited to MES store. complete all as specified and as directed. Note :- (i) Sl No of cealing fan and GE office name shall also be writing on fan with red colour permanant marker. Cost for the same shall deemed to be included in quoted unit rate. Nothing shall be paid extra on this account.

M&L for Earthing complete with galvanised steel pipe electrode, 32mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with earthing lead of 6mm dia galvanised iron or steel wire protected by provision of GI mediumgrade pipe 15mm bore including provision of concrete pit made with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4Kg/Sqm) and frame of angle iron 40x 40x6 mm and handle of 6mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering perforated at bottom, 1.75meter long placed on top edge of earth plate, common salt & charcoal filling with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate No -5 of SSR 2009 Part-I and connecting to Lighting protection earth test points complete all as specifed and directed including testing on completion.

Supply ,Laying and testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 core complete all as specifed and directed

Supply ,Laying and testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 2 core complete all as specifed and directed

Excavation in trenches in soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5 mtr in depth for route of cable and getting out complete all as specified and as directed .

Returning, filling in soft/loose soil including spreading, leveling watering and well ramming, in layers not exc 25 cm complete all as specified and as directed .

Removing of surplus soil to a distance not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point complete all as specified and directed.

Supply and Laying Double wall corrugated pipe(DWC pipe, Specification-120 mm OD/103 mm ID) for laying XLPE LT UG cable by DWC pipe throughout the LT cable length in pieces of convenient lenth complete all as specifed and directed .(Note : in pieces for easy rectification during fault ).

S&F GI tubing light grade 40 mm dia for protection of cable on pole/wall etc complete all as specified and directed.

S&F GI bracket made out of 40 mm bore GI pipe light grade /medume grade, ISI marked, medium grade 1.2m long bent to shape suitable for fixing of street light fitting including with 2 Nos MS clamps made with 40x3mm flat iron, bolts, nuts, washers etc including two coats of synthetic enamel paint over one coat of zinc chrome primer and fixing on electric pole complete all as specifed and directed.

Boring of holes under road ,pavement,hard standing by trenchless technology using ultra sound technique and necessary machine or by using manual mechanical tools with manpower including passing HDPE 150 mm dia suitable for 0.4 mpa working pressure complete all as specifed and directed.

Please Enable Macros to View BoQ information