Loading…
Loading…
Tender Value
Refer Docs
Closing Date
28 Sept 2026, 2:00 pm
Single Packet
Normal Tender
No
Not Applicable
Total Value Wise
Lowest to Highest
CONSIGNEE
Not Applicable
90 days
Expenditure
General
AD
1 condition
Railway reserves the right to procure the material only from Proven Sources having satisfactory past performance for similar or equivalent items [similar means any type of hardware tools] in any Zonal Railways/PSU/ Other Govt. organizations. The tenderers must upload documents pertaining to their past performance, in Zonal Railways/PSU/Other Govt. Organization viz, Inspection Certificates, R/ Note copies receipt challans & other receipt documents as proof of supply along with their offer otherwise they shall be deemed to have no such past performance for the similar or equivalent item and the tender shall be decided accordingly however, railway reserves the right to also check the firms past performance in its own Rly. Purchase order is not considered as performance until Railway get confirmation of supply against your attached PO. Para No. 2.6.1 of GCC attached may be referred to, for full details. Bidders are advised to read it carefully before bidding.
34 conditions · 1 needing a document upload
Have you attached the past performance credentials with your offer?
Have you mentioned the complete address of the work premises of the OEM where Third Party Inspection (TPI) inspection will be carried out before dispatch of the material?
FOR: Destination.
Bidders should confirm following certificate for Compliance (a) I have read the clause Sr. No. 32 of Instructions to tenderers and general conditions of tenders for supply contract attached with the tender regarding restrictions on procurement from a bidder of a country which shares a land border with India and on sub-contracting to contractors from such countries. (b) I certify that this bidder is not from such a country and will not subcontract any work to a contractor from such countries unless such contractor is registered with the Competent Authority. I also certify that this bidder will not offer any products/services of entity from such countries unless such entity is registered with the Competent Authority. (c) I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered. (d) I hereby acknowledge that in the event of acceptance of my bid on above certificate and if the certificate is found to be false at any stage, the false certificate would be a ground for immediate termination of contract and further legal action in accordance with the Law. (Bidders confirming this certificate for Compliance shall select Yes in the Complied column. However, in case you don t confirm above certificate for Compliance, select NO in the complied column. In such cases you are required to submit the certificate for Compliance as per Part B of Annexure8 Instructions to tenderers and general conditions of tenders for supply contract along-with their Bid/Offer.)
Bidders are reminded to carefully go through IRS conditions of contract (included and uploaded along with the bid document) particularly those pertaining to Code of Integrity, Misdemeanor and penal measures". If two or more bidders are found to be sister concerns or affiliates (having common partner/director/promoter/owner/holding company decision control etc.) the offers of all such sister concerns are liable to be rejected as per relevant provisions of IRS terms and condition.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1 condition
Code of Integrity Declaration: I/We have carefully gone through the IRS conditions of contract (included and uploaded along with the bid document) particularly Para 2500 pertaining to "Code of Integrity, Misdemeanor and Penalties". I/We hereby certify that no other concerns or affiliates (such as having common partner/director/promoter/owner/holding company/management control etc.) have participated in this tender which give rise to a conflict of interest or fall under anti-competitive practices. We understand that the offers of all such related concerns including ours are liable to be rejected as per relevant provisions of IRS terms and conditions. I/We, affirm that we shall abide by the Code of Integrity in general, with specific reference to conflict of interest [Para 2502 (e)], anti-competitive practices [Para 2502(c)] and obligation to proactive disclosures [Para 2503]. I/We understand that we are fully responsible for the above declaration and it shall not be the Railway's responsibility to verify the same. I/We are aware that we shall be liable for all consequences of violation of Code of Integrity, if detected at any stage.
1 location across West Bengal · 6 Set total
Tool box set etc.
AD265567~SER
AD265567
Open - Indigenous
Goods
West Bengal
₹0
Exempted
9 Sept 2026
9 Sept 2026
3 items · 6 Set total
Tool box set ( With containing SPANNER KIT CONSISTING OF (1) DE SPANNER (FLAT) SET12 PI ECES (06-32 MM) - 01 SET/KIT (6X7, 8X9, 10X11, 12X13, 14X15, 16X17, 18X19,20X22, 21X23, 24X27, 25X2 8, 30X32 MM) (2) RING SPANNER SET -12 PIECES (06-32 MM)- 01 SET/KIT (6X7MM, 8X9, 10X11, 12X13, 14X 15, 16X17, 18X19, 20X22, 21X23, 24X27, 25X28,30X32 MM) (3) ALLEN KEY SET- 9 PIECES (1.5 TO 10 MM) = 01 SET/KIT (1.5, 2,2.5, 3,4,5,6,7,10 MM) (4) CUTTING PILER 1621-8= 01 No/KIT (5) SCREW DRIVER BIG 929 = 01 No/KIT (6) SCREW DRIVER MEDIUM 828 = 01 No/KIT (7) SCREW DRIVER SMALL 824 = 01 No /KIT (8) BI T BOX (1/2 Inch drive socket) SET- 22 sockets (8 TO 32MM) WITH 5 ACCESSORIES (Ext. Bar 125 mm & 250 mm ,U joint , T bar 300mm , Ratchet Handle with Quick release ) = 01 SET/KIT, (8,9,10,11,12,13,14,15,16, 17,18,19,20,21,22,23,24,26,27,28,30,32mm) (9) HAMMER GUN - 4 KG = 01 No/KIT, (10) CIRCLIP PLIER INTE RNAL 7 to 8 INCHES (175mm to 200mm) = 01 No/KIT. (11) CIRCLIP PLIER EXTERNAL 7 to 8 INCHES (175mm to 200mm) = 01 No/KIT. (12) ADJUSTABLE SPANNER 10 INCHES = 01 No/KIT. (13) FLAT FILE 10 INCHES = 0 1 No/KIT (14) 36/41 FLAT SPANNER=01 No/KIT (15) 36/41 RING SPANNER = 01 No/KIT (16) 46/50 FLAT SPA NNER = 01 No/KIT. (17) 46/50 RING SPANNER= 01 No/KIT). MAKE TAPARIA OR STANLEY OR ITS EQUIVALENT BRANDS [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/30/CARR/KGPWS, SER | West Bengal | 2.00 Set |
| Total | 2 Set | |
3/4 INCH SQUARE DRIVE SOCKET SET (BOX SPANNER SET) CONSISTING OF 15 SOCKET OF Siz es: 22,24,27,28,29,30,32,33,34,36,38,41,42,46 & 50 MM WITH 4 ACCESSORIES AS FOLLOW: (1) EXTENSION BAR 200 MM & 400 MM, (2) SLIDING T HANDLE 480MM (3) REVESIBLE RATCHET HANDLE (4) TOOL BOX (All tools should be As per ANSI and DIN standards. Double nickel chromium alloy coated tip reduces corrosion). [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/30/CARR/KGPWS, SER | West Bengal | 2.00 Set |
| Total | 2 Set | |
Double ended Tubular box spanner set size-6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 2 0x22, 21x23, 24x27, 25x28, 30x32. Tommy Bar:1 dia 12x250mm 2-special Tommy bar. As per Taparia pric e list-[12.(E) Tubular spanner sets product no. TS 12 P (12 Pcs Set)] confirming to IS 2030-1989.Make -Tapa ria, venus, stainley or equivalent. One set=12 Nos. Double Ended Tubalr Box spanner & 02 Nos. Tommy ba r=14 Nos [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/30/CARR/KGPWS, SER | West Bengal | 2.00 Set |
| Total | 2 Set | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5780169.pdf
ATTACHMENT
5873815.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .