RFQ 10584 Development of Civil Infrastructure for receiving 1 MLD treated water at KCC from STP - Khetri

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out excavated soil and disposal of surplus excavated soil within a lead of 50 m. All kinds of soil

REINFORCED CEMENT CONCRETE WORK IN RAFTS, FOOTING, BASES OF COLOUMNS ETC AND MASS CONCRETE EXCLUDING COST OF CENTERING, SHUTTERING AND REINFORCEMENT : 1:2:4(1 CEMENT: 2 COARSE SAND: 4 GRADED STONE AGGREGATE 20 MM NOMINAL SIZE)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Cold twisted bars

Deployment of JCB for removing SILT or handeling of EARTH

PROVIDING AND LAYING IN POSITION CEMENT CONCRETE 1:4:8 (1 CEMENT: 4 COARSE SAND: 8 GRADED STONE AGGREGATE 40 M.M. NOMINAL SIZE) EXCLUDING SHUTTERING

PROVIDING AND LAYING S&S Centrifugally Cast(Spun)/ Ductile Iron pipes conforming to IS : 8329 : 250 mm dia ductile iron class K-7 pipes

PROVIDING AND LAYING DI specials of Class K-12 suitable for push on jointing. As per IS : 9523, upto 600 mm dia.

PROVIDING Push on joints to Centrifugally(spun) cast iron pipes or ductile iron pipes including testing of joints and the cost of rubber gasket : 250 mm dia pipes

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5 metres

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand)

REINFORCED CEMENT CONCRETE WORK IN WALLS(ANY THICKNESS), INCLUDING ATTACHED PILASTERS, BUTTRESSES, PLINTH AND STRING COURSES, FILLETS, COLUMNS, PILLARS, PIER, ABUTMENTS, POSTS AND STRUTS ETC, ABOVE PLINTH LEVEL UPTO FLOOR FIVE LEVEL, EXCLUDING THE COST OF CENTRING, SHUTTERING, FINISHING AND REINFORCEMENT: 1:1.5:3(1 CEMENT: 1.5 COARSE SAND(ZONE- III) : 3 GRADED STONE AGGREGRATE 20 MM NOMINAL SIZE)

REINFORCED CEMENT CONCRETE WORK IN BEAMS, SUSPENDED FLOORS, ROOFS HAVING SLOPE UPTO 15 DEGREE LANDINGS, BALCONIES, SHELVES, CHAJJAS, LINTELS, BANDS, PLAIN WINDOW SILLS, STAIRCASES AND SPIRAL STAIR CASES ABOVE PLINTH LEVEL UPTO FLOOR FIVE LEVEL, EXCLUDING THE COST OF CENTRING, SHUTTERING, FINISHING AND REINFORCEMENT: 1:1.5:3(1 CEMENT: 1.5 COARSE SAND(ZONE- III) : 3 GRADED STONE AGGREGRATE 20 MM NOMINAL SIZE)

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and canilevers.

Centering and shuttering including strutting, propping etc. and removal of form for : suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for : columns, pillars, piers, abutments, posts and struts.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

20 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand)

12 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Finishing walls with water proofing cement paint of required shade : new work(two or more coats applied @3.84kg/10 sqm)

White washing with lime to give an even shade : new work(three or more coats)

55kW/75 Hp centrifugal pump and motor set of discharge = 180 cum/hr and total head = 80 meters

Sluice valves/Gate valves of size 250 mm dia, bolted, flange type as per ANSI B16.5, PN-16

Non Return Valves of size 250 mm dia, bolted, flange type as per ANSI B16.5, PN-16

Providing and Fixing C.I. double acting air valve of approved quality, with bolts, nuts, rubber insertions etc complete. 80 mm dia

Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 with bolts, nuts, rubber insertions etc, 250 mm dia

Complete operation of pump at STP Khetri for all days in a year.

M/s Shri Krishan Construction Co.