Special repairs to bldg No P-1C Cook house and Dining hall of Demo Sqn SAW at Old TTSE ACCandS Ahmednagar

Amount

Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortor ,wall tiling etc complete all as specified and directed by Engineer-in-Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15 cm thick etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frames nexc 1.5 Sqm with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Taking down shutter exceeding 1.00 Sqm but not exc 2 Sqm etc complete all as specified and directed by Engineer-in-Charge

Taking down windows/ventilator n exc 1.5 Sqm,any size with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete solid block masonary built in cement mortar etc complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge

Taking down steel tubing and connections,15 mm bore etc complete all as specified and directed by Engineer-in-Charge

All as per item No 09 (here-in-before) but 20mm bore

Material and labour for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair pressed steel frames of size 125 mm x 60 mm (thickness of MS sheet 1.25mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc incl filling in door frames in plain cement concrete, 1:2:4 type B0, using 12.5 mm graded etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 30 mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (b) etc complete all as specified and directed by Engineer-in-Charge

S&F solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet etc complete all as specified and directed by Engineer-in-Charge

S&F Factory Made Solid PVC Moulded Door Shutter,with wood free EPS 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face in the frame at site etc complete all as specified and directed by Engineer-in-Charge

Supply and fix aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy and fixed 300mm long etc complete all as specified and directed by Engineer-in-Charge

Material and labour for pre-cast cement concrete block masonry with solid blocks, type C1 in 1:3:6 (20 mm graded stone aggregate) exc. 10 cm in width and setting built in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

S&F steel windows double shutter with side hung shutters incl box/projecting type hinges with steel handles and steel peg stay complete with guard bar and glazing bars dovetailed or welded etc complete all as specified and directed by Engineer-in-Charge

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engineer-in-Charge

S&F powder coated anodised aluminium glazed window shutter side hung / sliding type, without sash bars, aluminium sections weighing 0.25 kg/m aluminium open track section having reqd size of style and top rails, bottom rails including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.) suitable handle (1 No.) etc complete all as specified and directed by Engineer-in-Charge (Note : Glass will measured and paid separately)

Supply & fix in repairs brass cromium plated shower rose 125mm size etc complete all as specified and directed by Engineer-in-Charge

S&F in 5.5 mm thick shelves in cornerwith chamferred edges incl connectedbrackets etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs decorative towel ring chromium plated 150 mm dia fixed with (CP) brass screws of approved quality as etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs tubular towel rail CP 20mm dia C type 60cm long both flanges brass chronum plated etc complete all as specified and directed by Engineer-in-Charge

S&F in repair wall mixture, 3-in-1 with provn for both telephonic shower /over head shower etc complete all as specified and directed by Engineer-in-Charge

S & F 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs extruded brass handles 100mm, fabricated type polished etc complete all as specified and directed by Engineer-in-Charge

Taking down aluminium doors/windows shutters only and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixng the handles & mortice looks in existing postiion with and includig new screws including refixing the door shutters in same opening etc complete all as specified and directed by Engineer-in-Charge Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same will be paid separately under relevant items.

M&L for PVC mirror cabinet of size 16" X 16" with napkin rail in white colour etc complete all as specified and directed by Engineer-in-Charge

S&F mild steel barrel tower bolt 200mm long , stove enamelled black, with bright bolt etc complete all as specified and directed by Engineer-in-Charge

S&F for mild steel pressed handles 150mm long , oval type , stove enamelled black etc complete all as specified and directed by Engineer-in-Charge

S&F in repair MS 300mm ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and directed by Engineer-in-Charge

Supply and fix stainless steel butt hinges medium weight cold rolled of size 100mm etc complete all as specified and directed by Engineer-in-Charge

Hacking out old broken glass (any thickness size,quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads etc complete all as specified and directed by Engineer-in-Charge

Material and labour for 3mm thich figured glass pin headed type glazing with oil putty, bead in squares n.exc 0.50 Sqm Each etc complete all as specified and directed by Engineer-in-Charge

Material and labour for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in Each pane etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair wire cloth 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples etc complete all as specified and directed by Engineer-in-Charge

Material and labour for rough dressed shahabad stone, 25 mm to 40 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), laid and jointed pointed in cement and sand mortar (1:3) etc complete all as specified and directed by Engineer-in-Charge

Material and labour for coloured glazed ceramic tiles of size exc 0.06 Sqm and n'exc 0.18 Sqm , 8-10 mm thick as approved by GE as in dado/skirting or on vertical surfaces, over and including 10 mm thick backing coat in cement and sand mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

Material and labour for light shade vitrified ceramic tiles, 7 mm to 8mm thick (square/ rectangular) polished, area of each tile exc 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

All as per item No 41 (here-in-before) but on skirting over and including 10mm thick backing coat in cement and sand mortar (1:4)

M&L for machine cut kota stone slab flooring 18 to 20mm thick laid over & including 15mm thick cement screed bedding in cement and sand mortar (1:6) and jointed in neat cement slurry & pointed with pigment to match shade of slab including rubbing and mirror polishing etc complete all as specified and directed by Engineer-in-Charge.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick cement screed in cement and sand mortar (1:4) and jointed with cement slurry mixed with pigment to match the shade of slab etc complete all as specified and directed by Engineer-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of Each tile exc 0.06 Sqm but not exc 0.11 Sqm in floor laid over and including 15 mm thick screed bedding in cement and sand mortar (1:6), set and jointed in neat cement slurry and pointed in coloured cement to match the shade of floor etc complete all as specified and directed by Engineer-in-Charge.

M&L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns,etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; all as specified and directed.

Material and labour machine cut cudappah stone slab 18-20 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

Material and labour 16-18mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, full round moulding the edge laid over and including screed bed 15mm thick in cement sand sand mortar (1:4) jointing , pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing and polishing to exposed edges to achieve mirror finish etc complete all as specified and directed by Engineer-in-Charge

M & L for chequered cement concrete tiles with pigment 20cmx20cmx25mm thick, set, jointed and pointed in neat cement slurry floors laid over and including screed bed of 15mm thickness in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering, 10 mm thick on ceiling surfaces in cement and sand mortar (1:4) surfaces finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering 10mm thick in cement and sand mortar (1:6) on brick or concrete surface/ stone surfaces finishing even and smooth with thin layer of sagol finish etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering to 15 mm thick in cement and sand mortar (1:4) on brick/concrete/stone wall surfaces finished even and smooth with using extra cement etc complete all as specified and directed by Engineer-in-Charge.

Dismantling of water tanks from any position / location, of any make etc,of capacity exc 1000 Ltr & n.exc 2000Ltr with ball valve, etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs wash hand basin vitreous China white , flat back or angle type of size 450 X 300 mm waste chain and plug and porcelain stopper , waste pipe, a pair of brackets,or errecting stand and PVC connection etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device complete connecting to 'P' or 'S' trap etc complete all as specified and directed by Engineer-in-Charge

S&F in repair Brass Chromium Plated toilet paper holder fixed with (CP) brass screws of approved quality etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair 15 mm dia pillar tap, cast copper alloy, chromium plated, fancy type, screwed down high pressure, screwed for iron pipe etc complete all as specified and directed by Engineer-in-Charge

Supply and fix mild Steel 25 mm dia chromium plated curtain rods with fixing brackets fixed in repairs etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm SS sheet of high quality including a pair of brackets, waste coupling, plug and chain, 32 mm dia PVC flexible waste pipe and nahani trap etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair bib tap, 15 mm dia, CP cast copper alloy screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs stop valve cast copper alloy, fancy type screwed down, high pressure with screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge

Supply & Fix in repair health faucet with 8mm dia, 1.00 mtr flexible tube wall mountained / hooked etc complete all as specified and directed by Engineer-in-Charge

S&F rotational molded polyethylene water storage tanks double layered (cylindrical vertical with closed top) of 1000 litres capacity, triple layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe, tank nipple and connected etc complete all as specified and directed by Engineer-in-Charge.

All as per item No 64 (here-in-before) but 2000 ltrs etc.

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20mm bore fixed all as specified and as approved by GE/Engineer-in-Charge.

S&F ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 15/20mm dia bore pipe etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs PVC valveless, syphonic action type, flushing cistern,low level, 10 ltr capacity all accesories etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repairs 15 mm bore galvanised steel tubing medium grade laid in trenches or fixed to walls / ceiling etc complete all as specified and directed by Engineer-in-Charge

All as per items ser No 69 (here-in-before) but 20mm bore.

Supply and fix in repairs, grating 100 mm dia of PTMT etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs 75mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with stack clamps FI 50mm by 5mm flat iron clamps to walls incl bolt & nuts etc complete all as specified and directed by Engineer-in-Charge

All as per item No 72 (here-in-before) but 110 mm dia

Supply and fix in repairs PVC (SWR) bends any radius, for 75mm bore of pipe with access door etc complete all as specified and directed by Engineer-in-Charge

All as per item No 74 (here-in-before) but 110 mm dia

S&F 110 mm bore PVC (SWR) branch piece double (single/double Y) equal or unequal etc complete all as specified and directed by Engineer-in-Charge

S&F 75mm bore PVC (SWR) branch piece double (single/double Y) equal or unequal etc complete all as specified and directed by Engineer-in-Charge

M&L for screed bed or bedding layer of mortar 10mm thick in cement and sand mortar (1:3) by using 100% course sand on roof/chajja mixed with & including M&L for WPC @ 3% by weight of cement and finished the surfaces even and smooth without using extra cement to receive water proofing treatment including taking down existing screed bed / plaster etc complete all as specified and directed by Engineer-in-Charge

M&L for providing waterproofing treatment on roof / chajja / parapet etc. as per latest zonal specification, as per manufacturer's instructions and as specified after taking down / out as existing as site:- (a) M&L for cleaning the newly plastered surface with wire brushes and applying two coats of bituminous primer @ 0.25ltrs/sqm and allow to dry. (b) M&L for applying and laying torch APP polymer modified bituminous membrane 3mm thick with non woven polyster matt as reinforced weighing not less 3 kg / Sqm with white gravel / mineral finished by thermofusion process etc complete all as specified and directed by Engineer-in-Charge

M&L for preparing unplastered or plastered surfaces and applying two coats of oil bound distemper including 2mm thick wall care putty chalk whitening on wall including smooth roller finish etc complete all as specified and directed by Engineer-in-Charge

M&L for two coats of cement paint on newly plastered surfaces including preparation of walls etc complete all as specified and directed by Engineer-in-Charge

M&L for two coats of synthetic enamel paint over a coat of pink primer for new wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces and smooth finish with roller etc complete all as specified and directed by Engineer-in-Charge

Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer for newly / untreated steel surfaces of any description exc 10 cm width or girth including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge

M&L preparation of newly plastered surface and applying 2 coats of white wash on wall etc complete all as specified and directed by Engineer-in-Charge

M&L preparation of new plastered surface and applying 2 coats of white wash on ceiling etc complete all as specified and directed by Engineer-in-Charge

M&L preparation of old wooden surface and applying one coat of synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge

M & L for Complete removal of existing treatment on plastered and applying 2 mm thick wall care putty (birla) including prepration of surfaces, crack filling and applying two coats of oil bound distemper (OBD) etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repair nahani trap with 100 mm dia grating incl 75mm dia PVC bend for fixing with drain pipe and floor tiles in kitchen or bathroom etc complete all as specified and directed by Engineer-in-Charge

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 etc complete all as specified and directed by Engineer-in-Charge

Excavation in post holes (or similar holes) each n.exc 0.5 cum getting out returning, filling in watering and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm thick in hard/dense soil, making good surface and disposal of surfaces spoil to a distance not exc 50 mtrs etc complete all as specified and directed by Engineer-in-Charge

Excavating over areas, n exc1.5 m deep and getting out hard/densesoil making good surface and disposal etc complete all as specified and directed by Engineer-in-Charge

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm etc complete all as specified and directed by Engineer-in-Charge

M&L for PCC (1:4:8) type D2 using 40mm graded mechanically crushed stone aggregate as in foundation, mass concrete and sub-base all specified and directed.

M&L for Rolled section of structural steel work as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides angle cleats or other connecting plates conforming to Fe 410-W(gde-E-250) quality-A complete all as specified and as directed

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410-W(gde-E-250) quality-A complete all as specified and as directed

S&F 0.56mm plain alumunium sheeting alloy 31000 H4 in ridges, hip, valley gutter, drip and straight flushing (length and girth as fixed) etc complete all as specified and directed by Engineer-in-Charge

M&L for moorum filling in floors or pavings, laid in layers of 150mm thick, spread, levelled and rammed including watering and rammed to a true surface etc complete all as specified and directed by Engineer-in-Charge

M&L for hardcore of gauge n exc. 63mm, broken stone or boulders, deposited, spread and levelled in layers of 150mm thick , watered and rammed to a true surface etc complete all as specified and directed by Engineer-in-Charge

Material and labour for rendering, 15 mm thick on stone/brick / concrete surfaces in cement and sand mortar (1:6) surfaces finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M&L for Stone sett flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed; bedded in cement and sand mortar (1:3), joints 20mm thick; grouted in cement and sand mortar (1:2) with an admixture of metallic floor hardner 5% by weight of cement and struck flush etc complete all as specified and directed by Engineer-in-Charge

M&L Filleting in any position and to any shape in cement and sand mortar (1:4) including all mitres, stops, etc complete all as specified and directed by Engineer-in-Charge

M&L for Preparation of New plastered or unplastered surfaces of walls including applying two or more coats of Premium acrylic emulsion etc complete all as specified and directed by Engineer-in-Charge

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc or for walls, shafts, manholes not exc 10 Sqm on plan and getting out, in soft/loose soil etc complete all as specified and directed by Engineer-in-Charge

Excavation in trenches exc 1.5m wide and not exc 3m in depth for foundation etc or for walls, shafts, manholes not exc 10 Sqm on plan and getting out, in soft/loose soil etc complete all as specified and directed by Engineer-in-Charge

Demolition of cement concrete (un-reinforced) ,of any description, in any position, from the foundation of manhole including benching etc complete all as specified and directed by Engineer-in-Charge

Demolition of reinforced cement concrete of any description and in any position not otherwise provided for including reinforced cut as required to facilitate demolition etc complete all as specified and directed by Engineer-in-Charge

Demolition and breaking up 150 mm bore drain pipe i.e. salt glazed ware, AC or reinforced concrete pipe , set in cement mortar etc complete all as specified and directed by Engineer-in-Charge

All as per item No 108 (here-in-before) but 200mm bore pipe

Removing excavated materials to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point in soils etc complete all as specified and directed by Engineer-in-Charge

Material & labour for 150 mm bore Reinforced cement concrete pipe, type NP2 , haunching against the sides of pipe in PCC 1:4:8 type D-2 using 40mm graded mechanically crushed stone aggregates and making necessary connection after cutting into existing sewer line/manhole to make it functional etc complete all as specified and directed by Engineer-in-Charge for the following :- . Note :- (i) Cutting into existing sewer line/manhole shall be measured & paid seperately. (ii) Excavation & earth work shall be measured and paid separetely once either while demolition or while laying of pipe.

Material & labour for 200 mm bore Reinforced cement concrete pipe, type NP2 , haunching against the sides of pipe in PCC (1:4:8) type D-2 using 40mm graded mechanically crushed stone aggregates and making necessary connection after cutting into existing sewer line/manhole to make it functional etc complete all as specified and directed by Engineer-in-Charge for the following :- . Note :- (i) Cutting into existing sewer line/manhole shall be measured & paid seperately. (ii) Excavation & earth work shall be measured and paid separetely once either while demolition or while laying of pipe.

Material and labour for reinforced cement concrete (1:2:4) type B-1 using 20mm graded mechanically crushed stone aggregates as cover slab for drain or manhole including necessary form work and making holes 25 mm dia @ 150 mm centre to centre, set and jointed in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

M&L for PCC (1:3:6) type C-1 using 20mm graded mechanically crushed stone aggregates as in cills, steps, bands, copings, bed plates, kerbs, hold fasts blocks etc including weathering slightly rounded or chamfered angles of throating including form work etc complete all as specified and directed by Engineer-in-Charge

M&Lfor PCC (1:3:6) type C-1 using 20 mm graded mechanically crushed stone aggregates as in surface channel & drain etc complete all as specified and directed by Engineer-in-Charge

Demolition of blocks/bricks/RR walling built in cement mortar including coping etc of any description etc complete all as specified and directed by Engineer-in-Charge

Material and labour for brick work with fly ash bricks straight or curved on plan exc 6m mean radius, built in built in cement and and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

Material & Labour for rendering 10 mm thick in cement and sand mortar (1:4) on concrete surfaces of wall finished even & smooth without using extra cement mixed with water proof compound @ 3 % of the weight of cement as per the manufecturer's instructions etc complete all as specified and directed by Engineer-in-Charge Note :- WPC shall be measured and paid separetely.

Supply only integral water proofing compound etc complete all as specified and directed by Engineer-in-Charge

Cutting into existing manholes for connecting new drains 200mm internal dia of pipe making good to pipe abd rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 using graded stone aggregate smooh finished and reforming benching as required etc complete all as specified and directed by Engineer-in-Charge

Cutting into existing manholes for connecting new drains 150mm internal dia of pipe making good to pipe abd rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 using graded stone aggregate smooh finished and reforming benching as required etc complete all as specified and directed by Engineer-in-Charge

Supply and fix PVC (SWR) cowl for bore of pipe 75 mm etc complete all as specified and directed by Engineer-in-Charge

Supply and fix PVC (SWR) floor trap 75mm dia plain with PVC grating including jointing with solvent cement etc complete all as specified and directed by Engineer-in-Charge

Surface dressing n. exc 15 cm deep and removal of wild groth / shurps, roots, incl spraying of deweding chemical 1 m each side on both sides along sewage line etc complete all as specified and directed by Engineer-in-Charge

Taking down/out the covers from septic tanks/soakage well and dewatering the contaminated/waste material from septic tank/soak well/sump well of any liquid depth/capacity by means of using mechanical pumps diesel driven with fuel or by operator sewage sucking machine or by way of any other suitable means including disludging foreign material, sand, ashes, fibre, silt, grease, night soil, etc and removing the taken out sludge mixed material/liquid out side MD land by any means/source and replacing the covers back to its original position etc complete all as specified and directed by Engineer-in-Charge Note :- Volume of water shall be measured for the purpose of payment.

Supplying and fixing precast manhole cover (LD) of size 12" x 12" made up of steel fiber reinforced concrete M-30 grade as per IS etc complete all as specified and directed by Engr-in-Charge

All as per item No 126 (here-in-before) but size 18" x 18" etc

All as per item No 126 (here-in-before) but size 18" x 24" etc

Formwork to soffits of suspended slabs such as roof slab, floor slab, landings and similar work not exceeding 200 mm thick etc complete all as specified and directed by Engineer-in-Charge

Dismantling boarding, any description, fixed in wall or ceiling, any position with nails

S&F powder coated aluminum alloy interlocking snap grid 600mmx600mm consists of Min tee runners of size 38mmx25mmx1.5mm and cross Tee of size 25mm x 25mmx1.5mm spaced between the main Tee at 600 mm centre to centre to form a grid of 600mm x600mm etc complete including GI wire hangars at 1200mm interval all as specified

M&L for 4mm thick non asbestos fiber cement building boards of make 'E board classic designer board (cascade or Occenic)of M/s Everest industries Ltd or equivalent as approved fixed or laid/inserted to timber/GI/Aluminium frame work with etc complete all as specified and directed by Engineer-in-Charge

Taking down carefully copper/aluminum point wiring (light/fan/bell/socket, power point etc) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors etc complete all as specified and directed Engineer-in-Charge.

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable drawn in and incl PVC Casing and capping ISI Marked with its accessories with provn of PVC boxes and fixed with brass screws cup washer for fixing switches/socket/regulators etc incl 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable as Earth continuity conductor to common earth & connecting to earth dolly for the following, all as specified and directed. Note : 1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, bulkhead lights, bldg security light etc

One light point controlled by switch 5 Amp single pole one way

One fan point controlled by switch 5 Amp single pole one way

One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch

One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board

All as per Item No 134 (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase, Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board

S&F switch piano flush type single pole, one way 5/6 Amp etc complete all as specified and directed by Engineer-in-Charge

S&F Switch socket combination two in one, 5 Amp flush type 230V AC etc complete all as specified and directed by Engineer-in-Charge

S&F Switch socket combination 5 Amp / 16Amp, five in one, 5 / 15 Amp 230V AC etc complete all as specified and directed by Engineer-in-Charge

M&L for Modular point wiring complete concealed type with two runs of 1.5 Sqmm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH stranded cable drawn through and including PVC rigid conduit not less than 20 mm dia with its accessories and provn of PVC terminal switch box powder coated with and including 3mm thick white bakelite plastic laminated top sheet cover and fixed with brass screws, cup washer for fixing switches / socket / regulators etc with and including 1.5 Sqmm, Single Core, multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH stranded cable as earth continuity conductor to common earth & connecting to earth dolly for the following etc complete all as specified and directed by Engineer-in-Charge. Note : 1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black). 2. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc

One light point controlled by switch 5 Amp single pole one way

One fan point controlled by switch 5 Amp single pole one way

One bell point controlled by one switch 5 Amp single pole, one way on independent board

One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch

One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board

One light point controlled by switch 5 Amp single pole two way

All as per Item No 143 (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase , Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board

S&F bell Multi music type elelctric 230V AC single pole etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Switch, 6 Amp, one way, one Module. etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Switch, 6 Amp, two way, one Module. etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Switch, 16 Amp, onw way, one Module. etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Socket Outlet 6 Amp, 2/3 pin, combined two module etc complete all as specified and directed by Engineer-in-Charge.

S&F Modular Socket Outlet 6 Amp / 16 Amp - 2/3 pin combined two module etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Bell push, 6 Amp, one module etc complete all as specified and directed by Engineer-in-Charge

S&F Modular Fan Regulator Fan step regulator, 120 Watt - two module etc complete all as specified and directed by Engineer-in-Charge

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required etc complete all as specified and directed by Engineer-in-Charge.

Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting etc complete all as specified and directed by Engineer-in-Charge

M&L ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directed by Engineer-in-Charge

S & F in replacement double door Sheet metal enclosures factory made Vertical DBs Concealed in wall 4 way TPN, 415 volts ,protection class IP-42, including 63 Amps MCCBs Input and suitable for fixing of outgoing MCBs, etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet etc complete all as specified and directed by Engineer-in-Charge

S & F in replacement double door Sheet metal enclosures factory made DBs SPN, 8 way ,240 volts ,protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No: 5076 11 or equivalent in Simens/ Havells/ L&T

S & F in replacement double door Sheet metal enclosures factory made DBs 4 way SPN, 240 volts ,protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No:5076 10 or equivalent in makes mentioned in list of makes in Appendix `C'

S & F in replacement double door Sheet metal enclosures factory made DBs 4 way TPN, 415 volts Including 63 Amps MCCBs Concealed in Wall,protection class IP-42, suitable for fixing of MCBs etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No:5076 70 or equivalent in makes mentioned in list of makes in Appendix `C'

Supply & fixing MCB , SP, AC, 240 Volts of 06 to 40 Amp capacity 16KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing MCBs, SPN, AC, 240 volts of 40 Amps capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge

Supply and fix Industrial type ultra slim square profile LED lighting fixture with, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 20 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with and including 2 core sheathed copper conductor cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed by Engineer-in-Charge

S&F Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 10 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with 2 core seathed copper conductor cable of size 0.5 Sqmm with etc complete all as specified and directed by Engineer-in-Charge

S&F sub main wiring with two single core PVC insulated,unsheathed, FRLS stranded copper conductor cable 4 Sqmm with 4 Sqmm PVC insulated, unsheathed, FRLSH stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge Note : 1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Two run of 4 Sqmm cable i.e for one run for phase, one run for neutral with one run of 4 Sqmm cable for earth and one run of PVC Casing & caping shall be measured as one unit

S&F sub main wiring with two single core PVC insulated,unsheathed, FRLSH stranded copper conductor cable 6 Sqmm with 6 Sqmm PVC insulated, unsheathed, FRLSH stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge (Make of Cable : Finolex/RR Cable/Havells & Make for PVC Casing & Caping : AKG/PRESTOPLAST/PRECISION): - Note : 1. Porper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. Two run of 6 sq.mm cable i.e for one run for phase, one run for neutral with one run of 6 Sqmm cable for earth and one run of PVC Casing & caping shall be measured as one unit

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. Earth pit not less than 2.25 m depth and top edge of the earth plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts & washer etc. Earth wire connected upto main earth point / DBs alongwith 15mm dia earth protection pipe from top edge of the earth plate to main earth point to be connected and 20mm dia watering pipe light grade with funnel and provn of PCC using cement concrete (1:2:4) mix type B1 using granded stone aggregate and RCC pit cover 50 mm thick precost RCC (1:2:4) mix type B1 duly reinforced with 8 mm dia of TMT bar @ 100 mm CIC, both way, lifting arrangement complete including all necessary earth work etc complete all as specified and directed by Engineer-in-Charge

Supply & fix in replacement energy saving and environmental friendly long life LED street light 25 Watt (Bldg security light) made up of pressure die cast aluminium housing with mild power LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07 fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up with & including twin core twisted flexible copper conductor cable of suitable size of 230V , 50 HZ etc complete all as specified and directed by Engineer-in-Charge

M & L for Supply,laying ,connecting ,testing and commissioning and jointing , LT underground cable in replacement ,1100 volts grade, XLPE insulated, armored with galvanized round steel wire or steel strip, electric power cables heavy duty, with multi stranded aluminum conductor, laid in ducts, fixed on poles/walls with proper size saddles and clamp etc complete all as specified and directed by the Engineer-in-Charge of following Sizes :-

(a) LT cable 16 Sqmm, 4 core.

Supply &lay HDPE pipe 40 mm bore for laying of LT cable complete with all accessores etc complete all as specified and directed by Engineer-in-Charge

Taking out/down and opening of existing ceiling fans 1200 mm sweep,from any position, of any make etc & refixing at the desired location after reassembling and after servicing/overhauling by thouroghly cleaning the shaft,rotor,stator and applying lubricant/grease to bearings and one coat of super enamelled varnish over winding to improve the insulation resistance including repair /replacement of spare parts/ material /items , making connection by replacing PVC insulated unsheathed cable of copper conductor of size 1.50 Sqmm upto 0.50 Mtr length including using material/parts of minor nature such as screws, lugs, insulation tape, nuts, bolts, washers etc after cleaning the metal surface, greasing/lubricant etc to make it functional etc complete all as specified and directed by the Engineer-in-Charge

Material and labour for preperation of ceiling fans 1200 mm sweep, of any make by cleaning of metal surfaces including painting with spray painting on required gloss with white synthetic enamel paint on complete body of fans and writing MES No with black synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge

An amount of Rs 19,078.00 shall be deducted from BOQ on account of schedule of credit

M/s Automech Engineering

Avinash B Kullal

M/S-B.R.SONAWANE

M/s Meher Construction

M/s AG PATHAN

M/s. N D Karande

M/S. M. F. Sharif & Co.

OM SAI ASSOCIATES