TPR / ATHIRAMPATTI ANGANWADI

CONSTRUCTION OF ANGANWADI CENTER IN ATHIRAMPATTI VILLAGE & PANCHAYAT

Earth work excavation and depositing on banks with initial lead and lift in gravelly soil stiff clay, hard stiff clay, murram, boulders mixed with gravel as per SS 20-B for foundation.

M.Sand filling in to the basement including cost and conveyance to the site and all labour charges for filling as per standard speecifications

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance, labour charges etc.

Supplying and filling of conveyed earth with a lead of 5Km for basement filling

Brick work in CM 1:5 mix using country Bricks including cost and conveyance labour charges etc.

RCC 1 :1.5 : 3 mix using 20mm ISS HBG metal including cost and conveyance of all materials but excluding centering charges including labour charges for mixing laying concrete etc., complete

Supply and fabrication of steel for RCC works including cost and conveyance charges etc

Supplying and erection centering for sides and soffits inculding necessary supports and structing for plain surfaces such as RCC Slab,Lintel,Beam coloum,sunshade etc complete.,

Supply and errecting sheet centering GRADE BEAM of size 90 cm x 60cm 10 G sheet laid over silver oak joist and supported by casurina post of size 10 cm x 13 cm dia spaced at 75 cm center to center etc. complete

Supply and errecting sheet centering LINTEL ROOF SLAB BEAM of size 90 cm x 60cm 10 G sheet laid over silver oak joist and supported by casurina post of size 10 cm x 13 cm dia spaced at 75 cm center to center etc. complete

Plastering in CM 1:5, 12mm thick including cost and conveyance charges etc.,

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Brick jelly Lime concrete by using 20 mm brick jelly with lime in the ratio of 32 : 12.5 including cost conveyance of all materials and labour charges for mixing laying compacting well beaten with wooden batens etc complete

Finishing the Top of Roof with one course of Pressed Tiles of size 23 cm x 23 cm x 2 cm laid in cement mortor 1 : 3 and pointing with the same mortor mixed with water proof compound including cost and conveyance off all materials and labour charges etc complete

Paving the Floor with scratch proof ceramic tiles of size 305x305x6mm including cost and conveyance of all materials to site and all labour charges etc complete

Dadooring walls with glazed tiles of size 0.15 x 0.15 set with CM 1:3, 10 mm thick etc., complete

Cement concrete 1:2:4 mix usin 20 mm HBG metal inculding cost and coveyance of all materials to site including labour for mixing laying,curing etc complete.

Main Door - D 0.90 X 2.40M

Door - D1 0.75 X 1.50M

Door - D2 1.10 X 2.40M

WINDOW 1.20 X 1.60M

VENTILATOR 0.90 X 0.45M

Distembering two coats oil bound distember over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete ( Inner wall )

Exterior Emulsion painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Painting two coats with ready mixed paint including cost and conveyance charges etc.

Wiring with 2x2.5 sq.mm PVC sheathed SC alu.cable of 650 V Grade partly on TW fillets and partly in PVC rigid pipe concealed for vertical drops with TW and PVC accessories with T.W switch box to house control switch and regulator with 3mm thick Hylem sheet cover with painting on T.W fillets portion, and making good of the concealed portion with suitable colour for fan point. (S.D.No. 32)

Wiring with 2x 1.5sq.mm(22/0.3)PVC Insulated sc.cu. Conductor of 1100VPVC rigid pipe on wall7 celing for open PVC plug point

Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains SD 64

Supply and run of 2 X 1.5 sq.mm (22 / 0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade in 25 mm dia GI pipe ( Class ' B ' ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 69

Supply and fixing of WT bulk head fitting with guard ( Philips / Bajaj / Crompton / K Lite ) suitable for incandescent lamp with 60 W bulb.SD 84

Supply and fixing of CFL bulb

Supply and fixing of 10A 400V, 50 Hz 3 phase 4 wire watt hour meter on suitable TW box with earth connection SD 127

Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp.

Supply and fixing of 15Amps arial fuse unit (500amps) on suitable 100X100mm teak wood concealed box with hylum sheet on the tapping pole with necessary clamps [ SD No 130]

Provision for Stainless steel handle for disabled persons-toilet and Provision for Ramp -Supply and Fixing Stainless steel Handrail SOR 2025 -2026 VOL-1 PG_NO-102

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}