Work Contract for repair and maintenance work at AEE/West/Aundipatty and AEE/East/Aundipatty Office buildings in 110/22 KV Aundipatty Sub Station campus in Theni EDC

Dismantling the Pressed tiles and Weathering course in the open terrace area, including cost of all Labour, lead, lift, etc., complete

Dismantling Damaged RCC Sunshades ,including cost of all Labour, lead, lift, etc., complete

Brick work in CM 1:5 using II-Class Grond moulded Chamber burnt Bricks of size 9"x4 3/4"x2 3/4" including cost of all materials, lead, lift, labour, curing, etc., complete.

Supplying, erecting Steel Centering for Roof slabs, beams, Lintels, Sunshades, Staircase waist slab, Landing slab, etc. including cost of all materials, leads, lifts, labour etc., complete.

RCC in 1:1 1/2:3 using 12 to 20 mm HBG jelly excluding cost of centering charges & steel reinforcement including cost of all materials, lead, lift, labour, curing, etc., complete.

Supplying, fabricating and placing in position of TMT rods for reinforcement for RCC works including cutting, bending, placing in position and tying, as per standard specification including cost of steel, binding wire, etc. complete.

Chipping the old disintegrated cement plaster, removal of rust from reinforcement and application of zinc primer over reinforcement and suitable adhesive agent over existing plastered surface and plastering with CM.1:3, 12mm thick including cost of all materials, lead, lift, including scaffolding charges etc., complete.

Weathering course made up of Concrete broken brick jelly 20mm size in pure slaked lime over R.C.C. roof slab, (the proportion being 32:12.5) for required depth of 80mm for giving required slope and thickness to roof as required, well beaten with wooden beaters, and terrace flooring with one course of pressed tiles 20cm x 20cm x 20mm using cement mortar (1:3) mixed with crude oil 10 percent by weight of cement and pointed with same oiled mortar including cost of all materials, labour, lead, lift, etc. complete.

Supplying and fixing of Solid PVC door shutters using 19 gauge 19 mm MS square tubes for styles and outer frames, 15 mm MS square tubes for top, lock and bottom rails and the steel tubes shall be covered with 5 mm thick solid PVC sheets. (The overall size of styles shall be 50 mm x 30 mm and of frames shall be 50 mm x 45 mm, with suitable rebate for housing the shutter. The overall size of top rail, lock rail and bottom rail shall be 75 mm x 30 mm) and fixing shutter using 5 mm thick solid PVC sheets for paneling shall be rigidly fixed in position including cost of all materials, necessary furniture and fittings, lead, lift, etc. complete. ( Door size 0.75 x 2.10 m )

White washing two coats for Ceiling with White cement, including thorough scrapping, clean removal of dirt, etc. including cost of all materials, labour, lead, lift, labours, scaffolding, brush, etc., complete.

Supplying, aligning and fixing of 110 mm PVC Rain Water downfall pipe (4 kg/ Sq.cm) with necessary specials including fixing to wall with necessary clamps and screws, with necessary scaffolding, including cost of all materials, labour, T&Ps, lead, lift, etc.complete.

Hi Power Engineering