Supply of Furniture in Room No. 201,203 in A Block PWD Campus, Jaipur

Amount

Executive Table With Credenza (Miracle) Table: 2400 X 900 X 750 mm Right Credenza: 1500 X 600 X 750 mm Left Credenza: 1200 X 450 X 600 mm Back Credenza: 1800 X 450 X 750 mm The table top would be made in two parts out of 50mm thick MDF board having density 500-800kg/ m3. One of the rectangular top and the remaining. Both the tops of table are laminated with 0.2mm thick membrane foil. The edges of the table are in quarter round shape. Reverse side of top is laminated in matching color. The top is rested on one left side credenza & two pillars with modesty panel. The modesty panel would be made out of 18mm thick MDF board having density 500-800kg/ m3. The modesty panel is grooved with CNC router for design purpose and then laminated with 0.2mm thick membrane foil. This type of design made with CNC router is possible only on MDF board. The pillars are also grooved with CNC router for design purpose. The bottom of table is provided with 75 mm molding in membrane finish. Right credenza: The top of credenza would be made out of 25mm thick MDF board having density 500-800kg/m3, laminated with 0.2mm thick membrane foil. The edges of the top are in quarter round shape. Reverse side of top is laminated in matching color. Side panels would be made out of 18mm thick particle board having density 600-900kg/m3, laminated with 0.7mm thick curvica laminate on one side. All edges are sealed with 2mm thick pvc edge bending in matching color. The back side of the side unit would be made out of 18mm thick MDF board having density 500-800kg/ m3. It is grooved with CNC router for design purpose and then laminated with 0.2mm thick membrane foil. Shutters of side unit would be made out of 18mm thick MDF board having density 600-900kg/m3, laminated with 0.2mm thick membrane foil. The edges of the shutter are in quarter round shape. Reverse side of shutter is laminated in matching color. All shelves would be made out of 18mm thick particle board having density 600-900kg/m3, laminated both side with 0.7mm thick curvica laminate. All edges are sealed with 2mm thick pvc edge bending. All drawers are mounted on steel telescopic channel. All drawers are provided with handles.It has space for CPU storage.

Left credenza:The top of credenza would be made out of 25mm thick MDF board having density 500-800kg/m3, laminated with 0.2mm thick membrane foil. The edges of the top are in quarter round shape. Reverse side of top is laminated in matching color. Side panels would be made out of 18mm thick particle board having density 600-900kg/m3, laminated with 0.7mm thick curvica laminate on one side. All edges are sealed with 2mm thick pvc edge bending in matching color. The back side of the side unit would be made out of 18mm thick MDF board having density 500-800kg/ m3. It is grooved with CNC router for design purpose and then laminated with 0.2mm thick membrane foil. Shutters of side unit would be made out of 18mm thick MDF board having density 600-900kg/m3, laminated with 0.2mm thick membrane foil. The edges of the sliding shutter are in flat shape. Reverse side of shutter is laminated in matching color. All shelves would be made out of 18mm thick particle board having density 600-900kg/m3, laminated both side with 0.7mm thick curvica laminate. All edges are sealed with 2mm thick pvc edge bending.

Back Unit of size (w x d x h) 1800 x 450 x 750mm is provided with table. The top of back unit would be made out of 50mm thick MDF board having laminated with 0.2mm thick membrane foil. The edges of the top are in ster quarter round shape. Reverse side of top is laminated in matching color. Side panels would be made out of 18mm thick particle board having 0.7mm thick curvica laminate on one side. All edges are sealed with 2mm thick pvc edge bending in matching color. The back side of the side unit would be made out of 18mm thick MDF board having laminated with 0.2mm thick membrane foil. Shutters of side unit would be made out of 18mm thick MDF board having laminated with 0.2mm thick membrane foil. The edges of the shutter are in quarter round shape. Reverse side of shutter is laminated in matching color. All shelves would be made out of 18mm thick particle board having laminated both side with 0.7mm thick curvica laminate. All edges are sealed with 2mm thick pvc edge bending. All drawers are mounted on telescopic channel. All drawers are provided with handles. Glass Top : Providing Glass Top on main table, right & left side unit made out with 12mm thick float clear glass is provided with all edges should be diamond polished.

Executive Chair (High Back Revolving) Supply of High back office revolving chair, chair with high back support chair, chair base made out with M.S. pipe chrome plated finish and chair moving at bottom with five nos. of twin castor wheel duly made with nylon plastic with injection molding process. Chair back made out with net fabric and seat made out with medium density foam covered with fabric /net tapestry, chair having two nos. height adjustable arm made with PU base and fix at seat with the help of screw. Chair having seat adjustment gas lift function.

Supply of visitor chair fix type base made of 25mm rectangular pipe, seat and back made of 12mm ply having 40density foam at the seat and 32 density foam at the back, fixed type PU handle, fixed with the seat and back complete as per sample approved by engineer in charge.

Supply of computer Table : Size 1200x 750 X 750mm | L X W X H Table Top : The table top of size 1200 x 750mm should made out of 25mm thick prelaminated particle board, the table shall be sealed with 1.5 mm pvc edge bending on all around the edges of matching color, Legs made of 18mm thick prelaminated particle board with four side edge banding. The front and rear side and the rest of the sides should be edge banded with 1mm thick PVC Edge banding. The table shall also have pvc studs under the legs of table. The table have 3 number of drawer running of telescopic channel with handle and locking system, table shall have key board tray, as per approved color and sample by engineer in charge.

Supply of sofa set in 3 pieces with spring armed covered with approved tapestry cloth of @Rs. 550/- per mtr. The frame should be made out of cheer wood, Long piece should have 3 seater 5'3" long( excluding arms) and 4" thick P.U. foam of 32 density in seat and 18 nos. spring of size 5"x11 gauge and 50mm thick P.U. foam of 32 density in back. 2 nos side chair should be of same design/ shape/type of long piece having 9 nos. springs of size 6" x 10 gauge and 4" thick P.U. foam in seat of 6 nos springs of size 5" 11 gauge and 50mm thick P.U. foam in back. Total springs should be 75 nos. in all. Arms should have 25mm thick P.U. foam and the legs of sofa set should made out of 2.5" x2.5" wooden members. The arms rests should be covered with the foam and tapestry cloth as per approved sample/ drawing and design by the engineer in charge. (One 3 seater + 2 single seater is considered as one sofa set)

Supply of Centre Table 12mm thick clear glass top, overall size 4'x2'x18". The glass will be set in wooden frame with oriental style moulding on the frame. The legs will be carved out of teak wood members of out of size 21/2"x21/2" with horizontal members made out of size 4"x1" complete in all respect as per design and sample approved by Engineer-in-charge and client department.

Supply of Corner Table 12mm thick clear glass top, overall size 18”x18". The glass will be set in wooden frame with oriental style moulding on the frame. The legs will be carved out of teak wood members of out of size 21/2"x21/2" with horizontal members made out of size 4"x1" complete in all respect as per design and sample approved by Engineer-in-charge and client department.

Conference Table (Without Pop-up-box) OVEL shape Size :2400 x 1200 x750mm Table Top: The table top would be made out of 25mm thick MDF board FSEB finish and rear side and the rest flat edge duly sealed with PVC edge banded 1.5mm thick of matching color. Front Cover: The front cover of the table is made of 18mm thick MDF board FSEB finish matching with the color of the tabletop. Legs: The top is supported by legs would be made out with 25mm thick MDF board with 1.5mm thick PVC Edge Banding finish.

Medium Back Revolving) Providing executive revolving chair base made out with M.S. Chrom plated finish and chair moving at bottom with five nos. of twin castor wheel duly made with nylon plastic with injection molding process. Chair seat and back structure duly made with medium density foam covered with PU leatherette tapestry on seat and netback, chair having two nos. of arm made with PU finish and fix at seat &adjustable arms with the help of chromed steel screw.Chair having seat adjustment gas lift function.

Supply of airport 3 seater sofa, sofa with chrome plated arms & legs with perforated seat & back, silver grey powder coated & chrome coated combination. Size 1800x750x790mm.

Supply of High back chair (w) 670mm x (D) 675mm x (H) 1260mm. The seat cushion to be upholstered on 1mm thick water proof plywood and cut foam. The seat to made with 12mm thick hot pressed BWR plywood (IS grade-303) upholsetered with polyurethane foam and mesh fabric ( M/s harit Silk Mills) over it. The chair comes up with back tilt tension adjustment with back height adjustment, seat height and depth adjustment. The chair shall be provided with 4-position tilt lock and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The chair shall be visioned with adjustable armrest with PU padding and any position locking arrangement along with a headrest with angle adjustment, offers great adjustability to enjoy ergonomic comfort. The breathable mesh back chair withcushioned fabric seat shall be ergonomically design, it boasts a curved backrest to Improve your posture and provide comfortable seating all day long. The black five star nylon base with hooded nylon castors. The product shall be from ISO 9001:2015 approved make of Durian.

Supply ofcurtain cloth up to Rs. 450 mtr. inBlackout shade, with stitching and installation with 8 no. of fennel, S.S. Rod 25mm dia including brackets fixed with s.s. screws and rawal plugs, etc., wherever necessary complete two side central all fittings. As per colour and shade approved by engineer in charge

Supply of wooden curtain wall, made of mango wood, size 72” x72”. Each panel of the structure is 18”x72” in folding pattern. Total 4 panels shall be used. The panels mid portion CNC and curve work shall be done and melamine polished. As per design and sampleapproved by engineer in charge.

Abhishek Industries

Rashmi Enterprises