WELCOME MAINTENANCE, PERIODICAL SERVICES IN CERTAIN BLDGS AND REPAIRS TO JOINERY AND FLOORS INCLUDING SUNKEN FLOOR REPLACEMENT OF SANITARY OF PIPE FITTINGS AND PLUMBING LINES AT ARMY AREA COIMBATORE UNDER AGE (I) COIMBATORE

Amount

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed

All as per item No. 01 above, but exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and directed

Taking down shutters exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and directed

Taking down shutters not exceeding 1 Sqm each complete all as specified and directed

S&F pressed steel frames of size 165x60 mm for doors with one or more rebates including necessary fixing lugs, lock strike plate etc, complete all as specified and directed.

S&F pressed steel frames of size 105 x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified complete all as specified and directed

S&F 2nd class Hard wood 35 mm thick Glazed and skeleton shutters, open rebated prepared to receive glass/gauze etc. edges of framing, divided in to squares with plain chamfered or rounded, fitted with cut mitered beads for securing glass/gauze. Note: Glazing and gauze will be measured separately complete all as specified and directed.

S&F 2nd class Hard wood 35 mm thick framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F factory made 30 mm thick PVC moulded Panelled door shutter with 2 or 4 raised panel comprising of wooden frame & filler material with Pine/hard wood tubular board and Rigid PVC face with 0.50mm thick on both face of approved make complete all as specified and directed.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain color PVC sheet reinforced with MS Square tube, fixed in opening as per specification and drawing complete all as specified and directed

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame out of MS tube for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck in side with solvent cement complete all as specified and directed

S&F steel windows with side hung shutters including projecting type hinges with steel handle and steel pegs stay complete with glazing bars dovetailed or welded with glazing bars all as shown on drg complete all as specified and directed

S&F steel windows with side hung shutters including projecting type hinges with steel handle complete with out glazing bars dovetailed or welded as fly proof shutters complete all as specified and directed

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F Mild steel framed work such grill/guard bars including fixing on steel window frame complete all as specified and directed.

M&L Plain cement concrete 1:3:6, Type C0, using 12.50 mm graded stone aggregate as in filling hollow of pressed steel frame complete all as specified and directed

M&L Plain cement concrete 1:2:4, type B1, using 20mm graded stone aggregate as in bed block for fixing holdfasts and coping including necessary use and waste of form work complete all as specified and directed.

S&F 100mm long Mild Steel Butt hinges medium weight cold rolled complete all as specified and directed

S&F 100 mm size, Butt hinges extruded Aluminium alloy with galvanized mild steel hinge pin, anodized and fixed, type C-21, complete all as specified and directed

S&F 150 mm length aluminium anodized barrel tower bolt of extruded section complete all as specified and directed

S&F 150 mm size extruded aluminium alloy handles fabricated type , anodized complete all as specified and directed

S&F 300 mm long aluminium alloy, anodized sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section complete all as specified and directed

S&F floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel pin fixed to door, over all length 140 mm complete all as specified and directed

S&F Single action spring hinges, mild steel with steel wire spring, stove enamelled, black complete all as specified and directed

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as in repairs to steel / Wooden Joinery complete all as specified and directed

S&F ground or obscured or frosted sheet glass 4.0 mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and directed

S&F Sheet glass 4.0mm thickness ordinary quality in square not exceeding 0.50 sqm in each pane and glazing with oil putty/wooden beading complete all as specified and directed

S&F Sheet glass 4.0mm thickness ordinary quality and glazing with oil putty in square exceeding 0.50 sqm in each pane complete all as specified and directed.

S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed

S&F Steel PVC Coated, drapery rod of size 20-25mm dia, fancy type, including fixing of Steel powder coated fancy brackets & end stops 2 Nos in Each opening etc complete all as specified and directed.

M&L Preparation of new wood surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L Preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L 12 mm thick Prelaminated, termite resistant, water proofing plywood interior grade, Prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work and fixed in repairs complete all as specified and directed.

M&L 18 mm thick Prelaminated, termite resistant, water proofing plywood interior grade, Prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work and fixed in repairs complete all as specified and directed.

S&F Anodised aluminium door shutters with aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F 4.8 mm thick Sheet glass, ordinary quality and glazing with oil putty/rubber beading in square exceeding 0.5 sqm in each pane complete all as specified and directed.

S&F Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F Double action floor spring, heavy duty, hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel, and fixed complete all as specified and directed.

M&L Brooming down plastered or un plastered old decorated surfaces and applying one coat of white wash on walls including cornices pilasters etc complete all as specified and directed.

All as per item No 40 above but on ceiling complete all as specified and directed.

All as per item No 40 above but one coat of colour washing complete all as specified and directed.

M&L Preparation of old trated wall surfaces and applying one coat of Exterior emulsion paint on external walls complete all as specified and directed.

M&L Preparation of old trated wall surfaces and applying one coat of plastic emulsion paint on internal walls complete all as specified and directed.

M&L Applying high grade polyurethane based sealant on cracked joint of size 10mm x 5mm including necessary surface preparation such as cleaning, wire brushing, filling the joint with backer rod, using masking tapes over the sides of the joint, filling, tooling etc complete all as specified and directed.

Taking down cement or cement lime plaster on brick walls including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L Rendering 15mm thick in cement mortar 1:6 finished even and smooth (without using extra cement) on fair faces of brick work or concrete surfaces of walls, complete all as specified and directed.

M&L Rendering 15mm thick in cement mortar 1:4 finished even and smooth (without using extra cement) on fair faces of brick work or concrete surfaces of walls, complete all as specified and directed.

M&L Rendering 5mm thick in cement mortar 1:3 finished even and smooth (without using extra cement) on concrete surfaces of ceiling complete all as specified and directed.

M&L Preparation of newly plastered surface and applying two coats of exterior emulsion paint over a coat of wall care putty on external walls complete all as specified and directed.

M&L Preparation of newly plastered surface and applying two coats of plastic emulsion paint over a coat of wall care putty on internal walls complete all as specified and directed.

M&L Applying two coats of whitewash on newly plastered ceiling surfaces complete all as specified and directed.

M&L Preparation of old painted wooden surfaces exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per item No 53 above but on steel surfaces complete all as specified and directed.

M&L Washing rubbing down and stopping of previously painted surfaces and applying one coat of cement base paint on walls complete all as specified and directed.

M&L Preparation of old decorated plastered surfaces of walls, filling holes and undulations with wall care putty and applying one coat of oil bound distemper complete all as specified and directed.

M&L Complete removal of existing treatment on walls and applying two coats of oil bound distemper on old treated surface complete all as specified and directed.

M&L Applying one coat of wall care putty to cover old uneven plastered surfaces in ceiling up to 3mm to cover undulations and finished even and smooth using emery paper all as directed by Engineer in Charge.

M&L Writing letters or figures. (Block, Roman, Italic or Indian not exceeding 30cm height complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F Health faucet (Jet Spray), CP 15mm dia with flexible pipe and fixing nut etc complete fixed in repairs complete all as specified and directed.

S&F PVC valve less, syphonic action type flushing cistern, low level, 10 litres capacity, white, with inlet, ball, valve, float and handle including brackets, fixed in repair complete all as specified and directed.

S&F Stainless steel sinks with drainage board 1mm thick with plugs, washers and waste; including bedding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe, overall size 915mmx460mm, bowl size 410 x 330 x 160mm, fixed in repairs complete all as specified and directed.

S&F Chromium plated shower rose with or without swivel joint, 100 to 125mm size, including fixing to steel pipe or union, fixed in repairs complete all as specified and directed.

S&F Vitreous china wash basin, white, flat back, size 550 x 400mm including brackets, fixed in repairs complete all as specified and directed.

S&F Vitreous china wash basin, white, flat back, size 450 x 300mm including brackets, fixed in repairs complete all as specified and directed.

S&F Vitreous china wash basin, white, corner type, size 400 x 400mm including brackets, fixed in repairs complete all as specified and directed.

S&F Vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) , P trap/S trap etc complete fixed in repairs complete all as specified and directed.

S&F Vitreous China Wash down water closet pan (Pedestal pattern), white (excluding flushing cistern and flush pipe) complete fixed in repairs complete all as specified and directed.

Dismantling water tanks capacity exceeding 250 ltrs and not exceeding 500 ltrs complete all as specified and directed.

Dismantling water tanks capacity exceeding 500 ltrs and not exceeding 1000 ltrs complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank, 500 ltrs capacity, ISI marked, hoisted and fixed in position all as specified complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank, 1000 ltrs capacity, ISI marked, hoisted and fixed in position all as specified complete all as specified and directed.

S&F15mm dia bore bib tap, cast copper alloy, fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified and directed.

S&F 15mm dia bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed in repairs. (Minimum weight 15mm-90gms) complete all as specified and directed.

S&F 15mm dia, Pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F 15mm dia, Pillar taps, of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms), fixed in repairs complete all as specified and directed.

S&F Stop/angle valves, 15mm dia, fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, fixed in repairs complete all as specified and directed.

S&F Stop/angle valves, 15mm dia, fancy type, chromium plated cast copper alloy, with long sunk and cup ( concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, fixed in repairs complete all as specified and directed.

S&F 20mm dia Gunmetal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed in repairs complete all as specified and directed.

S&F 32/40mm dia expandable type PTMT waste pipe for Wash hand basin/kitchen sink fixed in repairs complete all as specified and directed.

S&F 25mm dia Gunmetal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed in repairs complete all as specified and directed.

S&F PVC connections of length 450mm with PTMT nuts to fix with 15mm bore pipes complete all as specified and directed.

S&F Stainless steel plate rack of approved make, size not less than 36 x 36 inches and weight not less than 7.00 kgs each complete all as specified and directed.

S&F 20mm dia, 1.25mm thick stainless steel curtain rod, fancy type fixed in repairs complete all as specified and directed

S&F Curtain rod brackets suitable for 20mm dia curtain rod, fancy type, fixed in repairs complete all as specified and directed.

S&F Tubular towel rail 20mm dia, 600mm long, brass chromium plated fancy type complete all as specified and directed.

S&F Readymade PVC / backlit Toilet cabinet with open able shutter and mirror on front face (Size not less than 330x430mm) complete all as specified and directed.

S&F 15mm dia, chromium plated cast copper alloy, fancy type, two in one combination of bib tap and angle valve fixed in repairs complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing including Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection complete all as specified and directed.

S&F 15mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, complete all as specified and directed.

S&F 20mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid and fixed to walls and ceilings or laid in floors complete all as specified and directed.

Taking up or down 40mm bore steel tubing and connections, complete all as specified and directed.

S&F 40mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid and fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F 110mm bore PVC(SWR) pipes single socketed, in any length, fixed to walls/laid in floor complete all as specified.

S&F 75mm bore PVC(SWR) pipes single socketed, in any length, fixed to walls/laid in floor complete all as specified.

Demolition of wall and ceiling boards (fibre pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

M&L False ceiling using GI snap grid system with roll-formed out of hot-dip galvanised steel capping (powder coated), main runner 38x24mm, cross, Tee 29x24mm, wall angle 24x24mm, thickness not less than 1 mm, members suspended with Hangers 4 mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, with 4mm thick designer ceiling board of any texture as approved by GE, all as per Everest Ceiling grid system "Regular T-2430" or its equivalent make of "Ramco/Charminar/Armstrong" complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, built in CM 1:6 straight or curved on plan exceeding 6m mean radius complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, built in CM 1:6 straight or curved on plan exceeding 6m mean radius complete all as specified and directed.

M&L Preparation of newly plasterd surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L Removing existing treatment, prparation of old treated wall surfaces and applying two coats of oil bound distemper over a coat of wall care putty and a coat of priming paint complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

M&L Sunken floor treatment by providing injection pressure grouting treatment using cement slurry mixed with grout admixtures non shrink additive using 40 PSI pump and applying two coats of acrylic polymer modified cementitious caoting including necessary surface preparation, providing 20mm thick water proofing screed bed/plaster in CM 1:4 mixed with conplast x 42IC @ 100ml or Pidiproof LW @ 200ml per bag cement. Two coats of Nitro proof 100 bitumen based water proofing over plastered surface complete all as specification of chemical resistant coating complete all as directed by Engineer in Charge. Note: The work shall be executed through authorised applicator of M/s FOSROC/Pidilite or techno comercially equvalant make using their materials supplied and in accordance with their respective manufacturers instructions.

M&L 400mm thick lime concrete with lime mortar 1:3 mix and 40 mm graded brick coarse aggregate as in sub-floors complete all as specified and directed.

M&L 15 mm thick Screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, set and jointed in neat cement slurry and pointed in white cement to match as in floors etc.complete all as specified and directed.

M&L Glazed ceramic tiles (300x200)x 6-7mm thick, set and jointed in neat cement slurry and pointed in white cement to match colour of the tile as in skirting/ dado complete all as specified and directed.

M&L 25mm thick cement concrete 1:2:4, type B1, using 20mm graded stone aggregate as in sub floor, sub bases, floors and pavings etc complete all as specified.

M&L for backing coat /screed 10mm thick in cement mortar 1:4 on fair faces of brick/ stone wall surfaces complete all as specified and directed.

S&F Cast iron floor trap 75mm dia with grating including jointing to waste pipe fand ixed in cement concrete1:2:4, type B-1 using 20mm graded stone aggregate complete all as specified and directed.

S&F Cast iron Nahani trap 75mm dia with grating including jointing to waste pipe fand ixed in cement concrete1:2:4, type B-1 using 20mm graded stone aggregate complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain sheet 0.45mm to 0.50 mm thick of any colour having tensile strength 550 mpa as in ridges, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Rolled mild steel work in purlins, rafters, roof truss etc including cleats/distance pieces etc complete, conforming to Fe-290 (Gde-E-165) complete all as specified and directed.

S&F Rolled Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

Narendran Enterprises

p.chinnasamy

TECKXPERT ENTERPRISES