SPECIAL REPAIR TO (AVN) WORK STATION HELIPAD UNDER GE(W) MATHURA

Amount

M&L for two coats of epoxy coating 120 micron with roller and brush, colour and pattern as approved by Engr-in Charge as in floors of hangers, including preparing the existing surfaces, epoxy putty where required to achieve smooth finish surfaces complete all as specified and directed.

Taking down anti bird netting of any description, at any position and at any height and refixing the same position complete including all necessary T&P ( if any reqd) as specified and directed.

S&F Hard drawn steel wire fabric n.exc 4 Kg cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt complete all as specified and directed.

M&L for framed work as in doors or gates angle or other covering door etc to be prepared for hanging or sliding with including either hooks and hinges or steel hanging door fittings (exclusive of steel or othr covering, running rails and guides) and hanging also fastening and fixing complete conforming to FE-290 Gde E-165 complete all as specified and directed.

M&L for preparing surfaces by brushing with wire brushes for removing mud,sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt and applying pure cold emulsion bitumen(Hincol emulsion RS2) @ 1 ltrs/Sqm complete all as specified and directed.

M&L for painting lines, dashes arrows letters etc on roads pavement with coloured as directed by Engineer-in-Charge and the like exc 10cm wide and 2-3 mm thick with hot thermoplastic road marking material with the mechanical instrument incl necessary preparation of surface and mixing with glass wool complete all as specified and directed

M&L for preparation of old painted concrete surfaces of any description , not otherwise described ,over 10 cm width or girth and painting one coat with synthetic enamel complete all as specified and directed.

M&L for complete removal of existing painting/treatment of external wall/AC sheet roof surface / pillars and preparing the plastered surface by rubbing,washing down with water and applying two coats of exterior emulsion paint with one coat of primer with mechanical equipment including necessary scaffolding and other safety arrangement to work at any height at site if required complete all as specified and directed.

M&L for complete removal of existing old steel surfaces of steel gate and applying two of coats synthetic enamel paint with one coat of primer with mechanical equipment (Deco paint) including necessary scaffolding and other safety arrangement to work at any height at site if required complete all as specified and directed.

B S ENTERPRISES

Shiva Traders

NAYYAR BUILDERS N ENGINEERS

ARCHI ENGINEERS

M/s Hoti Lal Contractor