Maintenance work

Dismantling , removing and carefully stacking damaged wall panelling or Aluminium partition, doors & windows etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Dismantling the damaged Mosaic in situ finish in cement mortar in flooring and in wall surface and clearing away with carefully stacking the material useful for reuse for any thickness etc., complete complying with standard specification and as directed by the Departmental officers.

Paving the floor with best quality vitrified Tiles (600mm x 600mm)of following size and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

5 SEATER LINEAR MODULAR WORKSTATION size: 1200mm X 525mm X 1200mm(H)- 75mm thick aluminium extruction section partition with powder coated along with 9mm thick prelaminated particle board with provision of electrical and data raceway. Top - 25mm thick paricle board duly post formed edge with flex laminate. Mobile pedestal of size 400mm x 450 mm x 640mm (H) - fabricated out of 18mm thick prelaminated particle board duly edge banded. Having 2 drawer one filing drawer. Keyboard tray of size 600mm x 300mm 18mm thick prelaminated particle board duly edge banded. Cpu trolly M.S powder coated.

SINGLE SEATER LINEAR MODULAR WORKSTATION size: 1200mm X 525mm X 1200mm(H)- 75mm thick aluminium extruction section partition with powder coated along with 9mm thick prelaminated particle board with provision of electrical and data raceway. Top - 25mm thick paricle board duly post formed edge with flex laminate. Mobile pedestal of size 400mm x 450 mm x 640mm (H) - fabricated out of 18mm thick prelaminated particle board duly edge banded. Having 2 drawer one filing drawer. Keyboard tray of size 600mm x 300mm 18mm thick prelaminated particle board duly edge banded. Cpu trolly M.S powder coated.

2 SEATER BACK TO BACK MODULAR WORKSTATION size: 1200mm X 525mm X 1200mm(H)- 75mm thick aluminium extruction section partition with powder coated along with 9mm thick prelaminated particle board with provision of electrical and data raceway. Top - 25mm thick paricle board duly post formed edge with flex laminate. Mobile pedestal of size 400mm x 450 mm x 640mm (H) - fabricated out of 18mm thick prelaminated particle board duly edge banded. Having 2 drawer one filing drawer. Keyboard tray of size 600mm x 300mm 18mm thick prelaminated particle board duly edge banded. Cpu trolly M.S powder coated.

Supplying storage unit of size 1200mmx1200mm and 450mm width fabricated out of 18mm thick water proof plywood and top sides and port portion with laminated with 1mm thick including finishing neatly edges laminated with 2mm thick PVC beading with swing type door providing hinges hand lock and painting interior portion with 2 coats of SEP over primer etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing of partly glazed and partly panelled pre laminated partical board made with following provisions Partition : Partition tile based system (75mmthickx3450mm ht) made of Aluminium extrusions duly powder coated with 40 to 60 microns of required colour choice. The frame is fixed with tiles to the Choice of Pre laminated particle Board in the bottom and Glass panel of 5.50mm thick for bottom panel. Skirting will be provided at the bottom of the partition that can be used to run the cables to a thickness of 100mm. The system is developed to run the cables (power & data) from the bottom to the table top level (universal cabling system) Necessary provision will be given to fix table top with the partition along with vertical supports wherever required as directed by the departmental officers. (The colour and quality of panels should be approved by the departmental officers before execution of work)

Supply and fixing the Table of size 1200mm X 750mm X 750mm(H)- made up of prelaminate partical board with following accessoriesTable top/ Vertical support legs are to be made of 25mm thick particle board duly postformed edge with flex laminate. Modesty panel 18mm thick prelaminated particle board. 3 drawer fixed half height size 400 X 450mm X 450mm(H). Side table size 900mm X 450mm X 750mm(H)- Top & Leg 25mm thick particle board duly postformed edge with flex laminate. Mobile Pedestal of size 400 x 450 mmx 450mm (H)(3 Drawer) made of prelaminated particle board pannels of 18mm thick with matching edge banding and face panels of drawers are to finished with edge band laminate. (Incl. Lock Handles, etc., (Laminate: Merino), Keyboard unit with EBCO Channels: Keyboard tray made of 18mm thick particole board edge band finish with EBCO Channels

Collecting the scattered debries using tipper machinery from work spot and loading into the tipper lorry and conveying away the same to outside by lorry to a lead of 3km entirely with in city limit including loading and unloading charges and dumping in low places and levelling neatly etc., complete complying with standard specification and as directed by the departmental officers. (200 cft volume capacity)

GST at 18%

Please Enable Macros to View BoQ information