ADDN/ALTN TO BLDG NO. P-1 (OLD EDC) AT IAM UNDER GE

Amount

Taking down chowkhats or frames with shutters n exc 1.5 Sq.m each (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkhats or frames with shutters exceeding 1.5 Sq.m and not exc. 4 Sq. m Each (without taking off shutters from the frames) complete all as specified and as directed.

S & F Powder coated Aluminium section for door frame , windows, ventilators, with one or more rebates, including joining cleats for fixing necessary lugs complete frame work complete all as specified.

S&F powder coated Aluminium section for door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing,fixng of glass pane, handles 2 Nos in each door, hinges, powder coated aluminium shap beading screws etc complete all as specified

S&F powder coated Aluminium section for window and ventilator sliding type without sash aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing,fixing of glass panes, powder coated aluminium shap beading screws, powder coated aluminium fittings such as peg stays 150 mm long ( 1 Nos) hinges type B-21 100 mm long (2 Nos) suitable handle 1 Nos complete all as specified

Supply only 4 mm thick (nominal) Sheet glass , ordinary quality , in squares, not exceeding 0.50 sqm each pane complete all as specified.

Supply only 4 mm thick (nominal) Sheet glass , ordinary quality , in squares, exceeding 0.50 sqm each pane complete all as specified.

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples all as specified and as directed

S & F aluminium 200 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete.

S & F Brass Mortice lock, 4 lever vertical type, size 100 mm fixed to aluminium door complete all as specified and directed.

Demolition of unreinforced cement concrete in ground floors etc and paving n. exc 15cm thickness (below or above ground level) complete all as specified and directed

M&L 75 mm thick PCC (1:4:8) type-D2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed

M&L for 25mm thick (1:2:4) Type-B-1 (using 12.5mm graded crushed stone aggregate) as in level course of flooring complete all as specified and directed .

M & L Double charged vitrified ceramic tiles coloured pattern as required 8-9 mm thick (Square/rectangular) polished, area of each tiles exceeding 0.36 sqm and not exceeding 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matches with and including laid over 15mm thick screed bed in cement mortar 1:4 compete all as specified and directed .

All as per item No. 14 above but on skirting over 10 mm thick backing coat in cement mortar 1:3 including dismantling of tiles complete all as specified and directed .

M&L for Machine cut kota stone slab flooring 20-25 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 20mm thick screed bed or bedding in cement mortar 1:4 complete all as specified and directed .

M&L for Kota stone slab 20-25 mm thick riser of staircase , skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing with & including backing coat in 10 mm thick cement mortar (1:3) to receive Kota Stone complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed .

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates, Fe 410-W (Gde- E- 250) quality-A Fe all as specified and directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 cocted.mplete all as specified and dir

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws complete with and including dismantling corrugated steel sheeting, any gauge, thickness, including nainital or similar roof coverings complete all as specified and directed.completed all as specified and directed. Make- TATA/JSW/ESSAR

S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws as in ridge,eaves boards, hips, velly gutter drip and straight flushing of reuired machine moulded shape and size complete with and including dismantling plain steel sheeting, any gauge, thickness, including nainital or similar roof coverings and eaves boards of any description complete all as specified and directed.completed all as specified and directed. Make- TATA/JSW/ESSAR

S & F of ceiling system complete with 12 mm thick ceiling boards ( 84% light reflectence ) and powder coated GI frame work with section not less than 0.7 mm thick GI frame work tying with 4 mm dia GI wire to roof truss all as per manufure instructions all as specified and directed. Make- Armstrong/ Everest/ Charminar

M&L rendering 15 mm thick in cement mortar 1:6 on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete with and including taking down cement or lime plaster of any description from stone /brick/concrete wall etc incl raking out joints hacking for key scrurbbing down with water and disposing of the rubbish complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry (type C-1) 1:3:6 (20 mm graded aggregate) with solid blocks, exc.10cm in width and setting in mortar complete all as specified and directed complete in CM 1:6 all as specified and directed.

M&L rendering 15 mm thick in cement mortar 1:4 on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and fair without using extra cement, complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar 1:6 on brick/concrete/stone wall surfaces of any description and other surface and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces on walls & other surface and applying two coats of oil emulsion distemper over a coat of 3 mm wall care putty with rubbing or smoothing of surface upto ture finish over a coat of water base primer complete all as specified and directed .

M&L for preparation of new plastered wall surfaces Complete removal of existing wall surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over prepared wall surfaces up to 15 mtr height complete all as specified and directed.

S & F in repairs for 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sq m in each pane.

S & F 150 mm length floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor complete all as specified and as directed.

S & F 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete.

M & L for preparation old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of redoxide zinc chrome coat complete all as specified and as directed.

M & L for Complete removal of existing treatment of wall surfaces including washing, rubbing down and stopping of distempered surfaces and applying two coats of oil bound distemper over 2 to 3mm thick wall care putty up to 15 mtr height complete all as specified & directed.

Complete removal of existing wall surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over prepared wall surfaces up to 15 mtr height complete all as specified and directed.

M & L 1.00 mm Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position but gear operated type with bevel gear box and crank handle ® as indicated, complete.

M & L Moorum /red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M & L Beams, cantilevers, bressummers, lintels over 1.5m span Type A -1 mix 1 :1.5:3 ( 20 mm graded aggregate) complete all as specified and directd.

Formwork to rough finished flat surface of concrete surface sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M & L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete ll as specified and directed.

Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.including cutting and polishing, making two nos grooves on long side of tread as in anti slip grooves and laid over 20 mm thick screed bed or bedding in cement mortar 1:4 and complete all as specified and directed.

Taking down carefully copper/aluminum sub main wiring of any size including casing and caping / conduit and making good the disturbed surface of walls as directed.

Taking down carefully copper/aluminium point wiring of any type of batten or conduit (Light, Fan, Socket or power) complete removing material from site and making good the disturbed surfaces of walls, roofs etc including two coats of white/colour washing/distempering etc to match the existing complete all as directed.

Taking down carefully main switches DB's/ MCB's and making good the disturbed surfaces of walls etc complete all as specified and directed.

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings, capacitors and regulators complete all as specified and directed.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed.

M & L point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts FRLS grade, stranded, PVC insulated, unsheathed copper conductor cable drawn through PVC concealed conduit of suitable size, complete with all PVC conduit accessories/ fittings, brass screws, washers etc, including metal flux boxes of suitable size and modular white plate with frame for mounting modular switches, sockets and regulators etc, including all cutting/chases etc in walls and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One light point /Fan point controlled by one switch.

All as per item No 50 above but One 5 Amps socket point on independent board.

All as per item No.50 above but wiring complete with 2.5 Sqmm for 3 pin 15A socket multipurpose on independent board and 2.5 Sqmm wire for neutral.

Supply & fixing modular switch 06 Amps 1 module complete all as specified & directed.

S & F modular socket 06 Amps 2/3 pin, 2 module complete all as specified & directed.

Supply & fixing modular switch 16 Amps 1 module complete all as specified & directed.

S & F modular socket 06/16 Amps 2/3 pin 2 module complete all as specified & directed.

M & L for sub main wiring complete with four runs of 6 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 1x 6 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.

M & L for sub main wiring complete with two runs of 1.5 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 1x 1.5 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.

M & L for sub main wiring complete with two runs of 2.5 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 1x 2.5 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed.

S & F wall mounted fan of size 400 mm sweep complete all as specified and directed.

Replacement of old unserviceable capacitors with 2.5 MFD capacitors of the fan in position complete all as specified and directed.

S & F MCB SP 6-32 Amps, 'C' series, 240 V complete incl making conections all as specified and directed.

S & F MCCB DB Vertical TPN 4 way 'A' frame,including MCCB TPN 63 Amp breaking capacity 16 KA- 01 nos, double door flush to wall including all cutting etc on wall including making good the disturbed surfaces to match complete all as specified and directed. Make- Havells or equivalent

S & F MCCB DB Vertical TPN 8way 'A' frame,including MCCB TPN 125 Amp breaking capacity 25 KA- 01 nos, double door flush to wall including all cutting etc on wall including making good the disturbed surfaces to match complete all as specified and directed. Make- Havells or equivalent

Supply and fixing LED light fittings 1x18 watts,220V ,AC box type with driver,holder including LED tube light connecting up with three core flexiable copper conductor cable of suitable size from ceiling rose complete with all accessories complete all as specified & directed by Engineer In charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC box type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & directed by Engineer In charge.

S & F electronic fan regulator modular type, 2 module, 120W including complete all as specified and directed.

supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Make- BAJAJ/ PHILIPS/ HAVELLS/WIPRO/ JAQUAR

M&L ceiling rose surface type, 65mm x 50mm three terminals, 3 phase / PVC / polycarbonate isolated body all as specified.

Supply and install hi wall split units air conditioner indoor/outdoor of capacity 2.0 TR complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 4 star rating and EER 3.2 complete all as specified and directed. (Note: The extra length of suitable size of AC gas copper pipe/ cable for installation of AC as per site requirement is deemed in the quoted rate. (Make :- Blue Star/ Carrier/Voltas)

S&F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA.

M & L for sub main wiring complete with two runs of 6 Sqmm single core FRLS grade PVC insulated unsheathed cable 1100Volt grade multistranded copper conductor drawn through and including PVC conduit and accessories in surface of wall, roofs etc with one run of PVC insulated copper conductor 6 Sqmm single core as earth continuity conductor connected with earth dolly and mains complete all as specified and directed.

S&F double pole and neutral enclosure with two pin and earth plug and socket including 1Nos MCB 20 Amps capacity complete all as specified and directed by Engr-in-charge.

M&L for mild steel stand (FACTORY MADE) duly painted suitable for fixing 2/1.5 TR AC out door unit fixing in wall / floor, including making bore required size for copper pipe & copper cable with sweating pipe required size and length upto ground level complete all as spcecified and directed.

Supplying and Fixing Copper refrigerant pipe Copper tube 5/8 " x 1/4" dia and connecting along with insualtion sleeves incl leak testing complete all as specified and directed.

Supply and fixing copper power cable of insulated, PVC sheathed , multistranded copper cable of 2.5sqmm 3 core, ISI marked, 1100 volts grade between indoor and outdoor unit along with necessary accessories complete all as specified and directed.

Supplying and Fixing PVC flexible Conduit pipe 25mm dia medium grade including all accessories for drain out pipe all as directed.

docileworx (BID ID -3152079)

PRAGATHI BUILDERS (BID ID -3155654)

Shanthi Construction (BID ID -3152172)

Ashraya Nirman (BID ID -3148533)

Moulya Builders (BID ID -3150849)