Special repair to Directorate of Industry at Majitha House Chotta Shimla (SH- Renovation of Directorate office and staff rooms at third floor).

Amount

Demolishing cement concrete manually / by mechanical means including disposal of material within all lead and lifts as per direction of Engineer - in charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing brick work In cement mortar by manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within all lead and lifts as per direction of Engineer-in-Charge.

Removing mortar from bricks and cleaning bricks including stacking within all leads (stacks of cleaned bricks shall be measured) as directed by the Engineer-in-charge.

Dismantling doors, windows and clerestory windows of area 3 sq. metres and below (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within all lead as directed by the Engineer-in-charge.

windows and clerestory windows of area beyond 3 sq. metres.with in all leads and lifts as directed by the engineer - in Charge.

Taking out doors, windows and clerestory window shutters of area 3 sq. metres and below (steel or wood) including stacking within all lead as directed by the Engineer-in-charge :

windows and clerestory windows of area beyond 3 sq. metres.with in all leads and lifts as directed by the engineer - in Charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within all lead and lifts as directed by the Engineer-in-charge.

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within all lead and lifts.

Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) in position excluding the cost of centering and shuttering including carriage of materials within all leads and lifts - All work up to plinth level.

Providing and laying Reinforced cement concrete work 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to all floor level, excluding the cost of centering, shuttering, finishing and reinforcement including carriage of materials within all leads and lifts.

Providing form work with steel plates of 3.15mm (Three decimal One five millimeters) thick, welded with angle iron in frames of 30 x 30 x 5mm (Thirty into Thirty into Five millimeters), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden/steel battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of materials within all leads and lifts:-Flat surfaces such as soffits of suspended floors, roofs, landings and the like :-Floor etc. upto 200mm (two hundred milimetre) in thickness complete including carriage within all leads, lifts.

Edges of slabs and break in floors and walls Under 20cm wide complete including carriage within all leads, lifts.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto all floor levels including carriage of materials within all leads and lifts.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor levels Cement mortar 1:4 (1 cement :4 coarse sand) including carriage of materials within all leads and lifts.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels including carriage of materials within all leads and lifts. Granite of any colour and shade Area of slab over 0.50 sqm

Providing edge moulding to 18 mm thick granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge including carriage of materials within all leads and lifts.

Providing second class deodar wood in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) including carriage of materials within all leads and lifts.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, of Second class deodar wood 40 mm thick, including ISI marked M.S. pressed stainless butt hinges of required size with necessary steel screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.

Providing and fixing 40 mm thick second class deodar wood wire gauge shutters of Second class deodar wood 40 mm thick using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws including carriage of materials within all leads and lifts.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) including carriage of materials within all leads and lifts.

Providing and fixing 6mm thick commercial plywood lining with butt jointing and nails (frame work & cover fillets to be paid for separately) including carriage of material within all lead and lift .

Providing and fixing Second Class Deodar Wood work in frames of false ceiling, partitions etc. sawn and fixed in position complete including carriage of materials within all leads and lifts.

Providing and fixing 12 mm thick shuttering ply board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) complete including carriage of materials within all leads and lifts.

Providing and fixing 12 mm thick commercial ply board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) complete including carriage of materials within all leads and lifts.

Providing and fixing 19mm thick commercial board or equivalent in Shutter for cupboard etc. including fixing with nickel plated piano Hinges with screw etc complete including carriage of material within all lead and lift as per direction of engineer in charge.

Providing and fixing 19mm thick commercial board or equivalent in shelve / box for cupboard with butt joints and fixing with nails and screw etc complete including carriage of material within all lead and lift as per direction of engineer in charge.

Providing and fixing 12 mm thick Pine Wood wood of approved quality Tongued and Grooved in lining / ceiling with butt jointing and nails etc.(frame work and cover fillets to be paid for separately) complete including carriage of materials within all leads and lifts.

Providing and fixing 12 mm thick HDF AC5 flooring of ARMSTRONG or its equivalent placed over cushion of 2 mm. thick expended polethene foam plus 100 Microne thick polethene sheet under lay No. 045 Beech West including border of required shade and colour complete in all respect upto all floor levels as per direction of Engineer in charge including carriage of materials in all leads and lifts.

Providing and fixing 12 mm thick HDF AC5 skirting of ARMSTRONG or its equivalent with approved adhesive including border of required shade and colour complete in all respect upto all floor levels as per direction of Engineer in charge including carriage of materials in all leads and lifts.

Providing and fixing teak plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws etc. including priming coat on unexposed surface complete including carriage of materials within all leads and lifts.

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Providing and fixing 50mmx12mm section moulded cornices with wood screws in ceiling and lining including mitring at junction. with in all leads and lifts as directed by the engineer - in Charge.

40mmx12mm section

Providing and fixing 19x6 mm section square edged cover fillets (beading) including mitring at junction with wooden screw/nails etc complete in first class teak wood loading carriage of material within all lead and lifts as per direction of engineer in charge

Providing and fixing 100x58x1.90 mm ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete including carriage of materials within all leads and lifts.

Providing and fixing 200 mm bright finished brass hard drawn hooks and eyes complete including carriage of materials within all leads and lifts.

Providing and fixing 150x10 mm bright finished brass tower bolts (barrel type) with necessary screws etc. complete including carriage of materials within all leads and lifts.

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete including carriage of materials within all leads and lifts.

Providing and fixing 250x16 mm bright finished brass sliding door bolts, ISI marked with nuts and screws etc. complete including carriage of materials within all leads and lifts.

Providing and fixing 125 mm bright finished brass handles with screws etc. complete including carriage of materials within all leads and lifts.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of materials within all leads and lifts.

25 mm thick mirror polished Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) including carriage of materials within all leads and lifts.

Providing and laying vitrified floor tiles in different/required sizes, and approved thickness with water absorption less than 0.08% and conforming to IS: 15622, of approved make, colour and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement matching pigments etc.complete including carriage of materials within all leads and lifts..

Providing and laying vitrified floor tiles in required/ different sizes and approved thickness with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. complete including carriage of materials within all leads and lifts..

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.with in all leads and lifts as directed by the engineer - in Charge.

15mm cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. in Cement Mortar 1:6(1 cement:6 sand), complete including carriage of materials within all leads and lifts..

6 mm cement plaster of mix : in cement mortar 1:3 (1 cement : 3 fine sand) complete including carriage of materials within all leads and lifts..

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of materials within all leads and lifts..

Wall painting Two or more coats on new work with acrylic emulsion of approved brand and manufacture to give an even shade complete including carriage of materials within all leads and lifts..

Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) complete including carriage of materials within all leads and lifts..

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat of approved brand and manufacture complete including carriage of materials within all leads and lifts..

Painting Two or more coats on new work with synthetic enamel paint of approved brand and manufacture to give an even shade complete including carriage of materials within all leads and lifts..

Polishing required coats withMelamine polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt,dust,and sand papered smooth and including a coat of wood filler up to all heights in all floor levels complete with scaffolding works including carriage of materials within all leads and lifts.

Providing and fixing 25 mm dia chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete including carriage of material within all leads and lifts :

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding complete including carriage of materials within all leads and lifts..

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) including carriage of material within all leads and lifts :For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including carriage of material with in all leads and lift.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.00 mm thickness weight not less than 12.50 kg / sqm including carriage of material within all leads and lifts

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of thickness 5.0 mm (weight not less than 12.50 kg/sqm) including carriage of material within all leads and lifts .

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete including carriage of material within all leads and lifts .

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including carriage of material within all leads and lifts.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern complete including carriage of material within all leads and lifts.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer & 32 mm dia CP brass waste of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with 15 mm CP Brass single hole basin mixer including carriage of material within all leads and lifts

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings complete including carriage of material within all leads and lifts .

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board of size 610x510 mm with bowl depth 200 mm complete including carriage of material within all leads and lifts.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge including carriage of material within all leads and lifts .

Providing and fixing white colour solid plastic seat with lid for pedestal type W.C. pan complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing CP Brass Single lever sink mixer of quality & make as approved by Engineer in charge including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing 32 mm dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing 100mm (One hundred milimetre) C.P. Grating with frame for gully / floor or nahani trap including crriage of material within all leads and lifts.

Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washer etc. complete including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing 600x120x5 mm glass shelf with round off edges, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail fixed with 40 mm long screws, rawl plugs etc., complete including carriage of materials within all leads and lifts.

Providing and fixing CP brass toilet paper holder fixed with screws, rawl plugs etc., complete including carriage of materials within all leads and lifts.

Providing and fixing M.S. holder bat clamp of approved design to PVC/sand cast iron/ cast iron (spun) pipes comprising of M.S. flat brackets made of 50x5 mm flat of specified shape, projecting 75 mm outside the wall surface and fixed on wall with 4nos, 6mm dia expansion hold fasteners, including drilling necessary holes in brick wall/ CC/ RCC surface and the cost of bolts etc. The pipes shall be fixed to the already fixed brackets with the help of 30 mm x1.6 mm galvanised M.S. flats of specified shape and of total length 420 mm and shall be fixed with M.S. nuts, bolts, & washers of size 25x6 mm, one bolts on each side of the pipe. Total bracket length 580 mm of approved shape and design (for single 100 mm dia pipe) including carriage of material with in all leads and lift.

Providing and fixing 15 mm dia nominal bore G.I. pipes for internal work complete with G.I. fittings and clamps, i/c cutting and making good the walls and floor etc.complete including carriage of materials within all leads and lifts.

Providing and fixing 15 mm dia nominal bore G.I. pipes for external work complete with G.I. fittings including trenching and refilling etc. complete including carriage of materials within all leads and lifts.

Providing and fixing 15 mm nominal bore 45 cm length uplasticised PVC connection pipe with brass unions complete including carriage of materials within all leads and lifts.

Providing and fixing 15 mm nominal bore G.I. Union in G.I. pipe line including cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall /floor and making good the same complete wherever required including carriage of materials within all leads and lifts.

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. including carriage of materials within all leads and lifts.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of materials within all leads and lifts.

Providing and fixing C.P. Brass extension nipples of required sizes 15mm nominal bore of approved make and quality as per direction of Engineer-in-charge complete including carriage of materials within all leads and lifts..

Providing and fixing CP flange / cap of approved quality for bib tap, angle cock etc. including carriage of materials within all leads and lifts.

Providing and fixing C.P. / S.S. health faucit with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer-in-charge .including carriage of materials within all leads and lifts.

Providing and fixing 110 mm X 90 mm size PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive including cost of cutting and making good the wall and floors etc. complete including carriage of materials within all leads and lifts.

Providing and fixing on wall face 110 mm dia PVC Finolex Type-B spigot,socket, waste and ventilating pipes of working pressure not less than 4.5 kg/sqm including coller and filling the joints with approved adhesive complete including carriage of materials within all leads and lifts.

Providing and fixing 110 mm dia PVC Finolex clamps ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of materials within all leads and lifts.

Providing and fixing 110 mm dia PVC Finolex plain bend Type-B ISI marked complete including filling the joints with approved adhesive complete including carriage of materials within all leads and lifts.

Providing and fixing 110 mm dia PVC door bend Type-B with oval access door, insertion rubber washer ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts.

Providing and fixing 110mm dia PVC Finolex single equal branch Type-B with oval access door, ISI marked insertion rubber washer complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts.

Providing and fixing 110mm dia PVC Finolex Type-B single equal branch plain, ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts.

Providing and fixing 110 mm dia PVC Finolex Type-B collars ISI marked including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts.

Providing and fixing 110 mm dia PVC Finolex Type-B cowl ISI marked including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts.

Disposal of earth / moorum / malba / building rubish / similar un-surviceable dismantalled or waste materials by mechanical means including sorting out useful and un- useful material and transportation of the un-useful material for disposing at approved dumping site or otherwise and including payment of prescribed charges of dumping to the owner of dumping site (to be arranged by the contractor) for the satisfaction of Engineer- in -Charge through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and other incidentals necessary to complete the work by mechanical means and labour (if required) including disposal of all surplus un-useful materials at approved dumping site including all leads and lifts.

Jibachh Goswami

Aditya Jaiswal

RAJAT GAUTAM

M Pandit

BHARAT SINGH CHAUHAN