Chet Singh Wala

Amount

5.2 (i)/Carriage of Material Jallalabad Sand Lead upto 70 km

6km to 40 km

41km to 60 km

61km to 70 km

5.2 (i)/Carriage of Material Pathankot Sand Lead upto 250 km

6km to 40 km

41km to 60 km

61km to 150 km

151km to 250 km

4.1 + 5.2/Carriage of earth and Stone sand, earth, fly, ash, bajri, shingle, spals, brick blast etc.

6.2/Earth work excavation in ordinary soil, exclusive of compensation of earth :--

(g) Compaction :--

(i) Extra for laying earth/fly ash as per specifications for compaction in 20 cm layers and dressing but excluding cost of rolling.

(ii) Extra for watering the earth/fly ash laid in 20 cm layers as per specifications for compaction.

8.5 (b)/Dismantling brick work tile masonary or tile lining.

15.67/ Cement pointing 1:2 flush on flat brick flooring.

16.8/ Distempering with dry distemper of approved manufacture two coats over one priming coat to give an even shade.

16.14/ Finishing walls with exterior decorative cement based paint s.a. Snowcem, Rubiacem etc. on new work two coats to give an evevn shade.

17.10 (iii)/ Hollock wood doors and window including iron hold fast, corner straps, hinges, screws chocks, cleats, stop and chords etc. but excluding chowkhats complete fixed in position

18.24/Supply & fixing of pressed steel frames (chowkats) consisting of 18 gauge thick steel sheet of the specified section (standard design latest) including iron lugs iron hinges, confirming to PWD specifications including bolts for fixing stops, lock etc. complete. a) Doors and windows frame of size 118 mm x 60 mm wide single rebate weighing 3.43 kg per meter

19.2/Dressing side slopes and preparation of sub grade for lining.

19.16/Extra allowence for scaffolding for side slopes only

28.36/Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B- Class,premium make such as (Jindal Hisar) including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. (For Charge Line)

28.43/Providing, fixing and jointing ISI Marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete. (e) 40mm i/d Gun Metal peet valve heavy pattern.

28.2+28.13+28.18/Providing, Laying , fixing & jointing of P.V.C. Pipes including special as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications including specials, excavation by Mechanical means and refilling in origional condition. PVC 6kg/cm2

(xii) 63mm o/d pipe of 6kgf./sqcm

(xiv) 90mm o/d pipe of 6kgf./sqcm

28.27/Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).

(a) 80mm i/d sluice valve flanged

(b) 100mm i/d sluice valve flanged

28.51/ Providing and placing in horizontal layers filtering media screened, washed and cleaned as described below :-

(a) Top layer :----- Fine sand screened, cleaned and washed and graded (effective size 0.2 to 0.4mm with uniformity coefficient 2.00 to 3.00) from Pathankot or other approved source.

28.66/ Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. (a) Size 0.90m x 0.90m

28.90/ Supplying, fixing and testing at site Automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible / monoblock to be fixed on existing panel for OHSRs complete in all respects.

29.26/ First class flat brick paving or flooring laid over and in cement sand mortar 1:5 in ordinary bonded courses or in herring bone or other special courses, to templates, over dressed foundation and to correct longitudinal and cross slopes as shall be required by the Engineer-in-charge. All joints shall be filled with mortar and struck flushed as the work proceeds.

NS/Providing and placing LDPE Film 250 micron on side slope and in bed including overlapping over 25mm thick mud plaster.

NS/Extra for additional 4mm thick cement plaster in 1:5 on LPDE film on side slope and bed.

NS/Supplying and fixing 150 mm i/d Galvanized iron sheet floating arm of 2.85mtr with Sluice Valve complete.

NS/Taking out filter media 1st to 5th layer & plasing the same into filter beds ofter washing, screaning & cleaning complete in all respect.

(a) Top Layer

(b) 2nd to Bottom Layer

NS/Repair of Expantion joints with nuts, bolts, jain, dori etc. including labour.

NS/ Repair of Plinth protection of OHSR.

NS/ Painting on inlet, Outlet and Scour pipe lines.

NS/Providing & fixing Shunt Capastor for control panal.

NS/ Providing & fixing Control Switch, ampier meter for control panal

NS/ Repair of Starter.

NS/ Providing & Fixing cutout for control panal

NS/ Repair of Panal Board and Door etc.

NS/ Providing, fixing & jointing water connection in MDPE pipe (inside ground) and G.I. pipe (outsaide Ground) line 15mm i/d including cutting and threading pipe and making long screw etc. complete including cost of Orifice Type Innovative GI Union, PVC/Metalled 15mm i/d Tap, Nipple, Elbow, clump etc. complete in all respect. (On New Pipe Line)

NS/ Providing, fixing & jointing water connection in MDPE pipe (inside ground) and G.I. pipe (outsaide Ground) line 15mm i/d including cutting and threading pipe and making long screw etc. complete including cost of Orifice Type Innovative GI Union, PVC/Metalled 15mm i/d Tap, Nipple, Elbow, clump etc. complete in all respect. (On Existing Pipe Line)

NS/ Repair of Existing House Hold Connections with Providing, fixing & jointing Orifice Type Innovative GI Union complete in all respect. (On Existing Water Connections)

NS/ Providing, installing, testing & commissioning one no. Electronically actuated, diaphragm operated, Metering system, chemical dosing Chlorinator, suitable for delivering 0.5 to 0.6 litres of bleaching powder solution/ sodium hypo solution per hour under maximum delivery pressure upto 7 kgcm^2 and suction lift not less than 1.5m as per DWSS standard Specification. (Make Milton roy)

NS/ Painting on Sign Board at Water Works Site.

NS/ Credit of old bricks and bats in S&S Tank.