Loading
Loading…
Loading…
Tender Value
₹50.5 L
EMD Value
₹1.0 L
Closing Date
14 Jul 2026, 1:00 pm6d left
Executive Engineer PHED Division Malpura
Executive Engineer PHED Division Malpura
Providing Drinking water facility for Luhar Basti and Chabadi Basti Named Maharana Pratap Colony in Malpura Urban area under Sub Div Malpura MLA Constituency Malpura Dist Tonk
2026_PHCJA_573067_1
EE PHED DIV MALPURA 71/2026-27
Open Tender
Civil Works
90 days
Executive Engineer PHED Division Malpura
As Per Tender Document
3 documents required · 3 mandatory
₹5,000
Executive Engineer PHED Division Malpura
₹1.0 L
Yes
4 Jul 2026
4 Jul 2026
15 Jul 2026
4 Jul 2026
14 Jul 2026
4 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.:
All kinds of soil
Rate is exclusive of GST. | 2,965.02 | CUM | 169.49 | ₹5,02,541.24 |
| 2Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended up to date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) . Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. Supply may be in coil or straight length in 6 M/12 M. The rate is exclusive of GST | |||||
| 2.01 | HDPE PE-80 PN-6 90 mm dia | 3,328 | RMT | 259.32 | ₹8,63,016.96 |
| 2.02 | HDPE PE-80 PN-6, 125 mm | 2,733 | RMT | 562.71 | ₹15,37,886.43 |
| 3 | Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work.
The rate is exclusive of GST | 185.37 | CUM | 641.53 | ₹1,18,920.42 |
| 4 | Providing and laying in position cement concrete M10 grade nominal mix 1:3:6 (1 Cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work.
The rate is exclusive of GST | - | CUM | 3,964.41 | - |
| 5Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS AISI 316/410 Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insertion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. The rate is exclusive of GST | |||||
| 5.01 | Manually Operated Resilient Seated Sluice Valves of Class PN 1.6 80 mm dia | - | Each | 7,743.22 | - |
| 5.02 | Manually Operated Resilient Seated Sluice Valves of Class PN 1.6 100mm | - | Each | 9,791.53 | - |
| 5.03 | Manually Operated Resilient Seated Sluice Valves of Class PN 1.6 150mm | - | Each | 16,194.07 | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.82 MB
Tendernotice_2.pdf
PDF • 2.07 MB
BOQ_1019437.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid