Loading
Loading…
Loading…
Tender ID
Tender Value
₹7.4 L
EMD Value
₹14,800
Closing Date
20 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
ELEC. GENL
15 conditions · 4 needing a document upload
As per Note (ii) of 5. Bid security Part I of Instructions to Tenderers(ITT) of GCC April 2022, "Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' shall be exempted from payment of Bid Security detailed above". Bid security exemption cannot be claimed with Documents other than this and such offers will be summarily rejected.
Annexure VI B format of GCC April 2022 attested by Chartered Accountant has to be attached Mandatorily by tenderer along with Audited Balance sheet if the Advertised value of tender is Rs. 50 Lakhs and more.
Para 14 of Instructions to Tenderers of GCC April 2022 must be adhered by Tenderer and all the documents mentioned there has to be attached mandatorily according to the type of Constitution of business like Sole proprietorship, Company, LLP etc.
A copy of the valid Electrical license as applicable to this work, issued by State Electricity licensing Board . The Electrical license which has to be uploaded should be in the name of Contractor or permanent employee of the Firm.
I/we the tenderer (s) am/are signing this document after carefully reading the contents.
I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof.
I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us.
I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements.
I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us.
I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us.
I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust.
I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected.
I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year.
I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed)
31 conditions · 1 needing a document upload
The Stores materials which are supplied by Railways shall be collected from SSE/E/Works/SA stores duly transporting the same to the site by own cost borne by the contractor only. The released Railway materials if any should be handed over to the maintenance concerned SSE/Power stores duly getting forwarding acknowledgement from SSE/E/Works concerned.
I/We also hereby agree to abide by the updated Regulations of Tendersand Contracts and General Conditions of Contract issued by theEngineering Department of Indian Railways along with correction slipsissued from time to time and to carryout the work according to the SpecialConditions of Contract and specifications of materials and works as laiddown by Railway in the Annexed Special Conditions / Specifications,Schedule of Work for the present contract.
All rates quoted in the tenders shall be deemed to be inclusive of CGST,SGST, IGST etc., payable by the contractor to the Government or anypublic body and no additional amount/rate or claim will be entertained onthis account by the Railways. Also no claim whatsoever will be accepted byRailways on account of revision of tax rates, new taxes of statutory natureby State/Central Govt.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
I/We also hereby agree to abide by the Indian Railways Standard General Conditions Of Contract, with all correction slips up-to- date and to carry out the work according to the Special Conditions of Contract and Specifications of materials and works as laid down by Railway in the annexed Special Conditions/Specifications, Schedule of Rates with all correction slips up to date for the present contract
I/We have read the various conditions to tender attached hereto and agree to abide by the said conditions
I/We also agree to keep this tender open for acceptance for a period of 60 days from the date fixed for opening the same
I/We offer to do the work for Divisional Electrical Engineer, GENERAL, Salem Division, Salem, at the rates quoted in the attached schedule and hereby bind myself/ourselves to complete the work in all respects within the period of completion stipulated in the tender document, from the date of commencement of work of the tender. The amount as stipulated in the tender document is herewith forwarded as Earnest Money. Full value of the earnest Money shall stand forfeited without prejudice to any other right or remedies in case my/our Tender is accepted and if :(a) I/We do not execute the contract documents as stipulated in performance guarantee clause of GCC 20222 as detailed in general instructions.(b) I/We do not commence the work within seven days after receipt of LOA/orders to that effect.
I/We hereby Confirm that the rates, rebates and/or other financial terms, if any, quoted by us in the relevant fields of the Financial Bid page will only be the ruling terms for deciding the inter-se ranking, and any such condition having financial repercussions, if quoted by us anywhere else including attached documents shall not be considered for deciding inter-se ranking
However, Railways shall have the right to incorporate any such condition quoted by us, in the contract, at their discretion, if contract is placed on us.
I/We have read the various conditions attached/ referred to in this tender document, and agree to abide by the said conditions.
All the tenderers/Contractors have to deposit full earnest money and tender document cost as stipulated for the tender, through online modes as permitted in IREPS application through multiple banks net banking, debit and credit cards only. On failing which offer will be summarily rejected.
The Tenderer should submit a copy of GST/PAN and NEFT Form.
Payment of Security Deposit/EMD and Tender form cost should be made on line only.
GCC 2022- All GCC clauses (updated including with all correction slips on date) are applicable.
i)For all the tenders having advertised cost of Rs. 10 lakh or above, the contractor shall have the option to take payment from Railways through a letter of credit (LC) arrangement. (ii)This option of taking payment through LC arrangement has to be exercised in IREPS (Indian Railway Electronic Procurement System - the e-application on which tenders are called by Railways) by the tenderer at the time of bidding itself, and the tenderer shall affirm having read over and agreed to the terms and conditions of the LC option.(iii)The option so exercised, shall be an integral part of the bidder's offer.(iv)The above option of taking payment through LC arrangement, once exercised by tenderer at the time of bidding, shall be final and no change shall be permitted, thereafter, during execution of contract.(v)In case tenderer opts for payment through LC, following shall be the procedure to deal release of payment through LC:(a)The LC shall be a sight LC.(b)The contractor shall select his Advising/Negotiating bank for LC. The incidental cost towards issue of LC and its operation thereof shall be borne by the contractor.(c)SBI, New Delhi, Main Branch will be the nodal branch for issue of LCs based on online requests received from Railway Accounts Units for tenders opened in financial year 2019-20. SBI branches where the respective Railway Accounts Office has its Account (local SBI branch) will be the issuance/reimbursing branch for LC issued under this arrangement. The Bank shall remain same for this tender till completion of contract. The incidental cost @ 0.15 % per annum of LC value, towards issue of LC and operation thereof shall be borne by the contractor and shall be recovered from his bills. (d)The LC shall be opened initially for duration of 180 to 365 days in consultation with contractor. The LC shall be extended time to time as per the progress of the contract, on the request of the contractor. The value of LC to be opened initially as well as extended thereafter shall be finalised by the engineer in consultation with the contractor on the basis of expected progress of work.(e)The LC terms and conditions shall inter-alia indemnify and save harmless the Railway from and against all losses, claims and demands of every nature and description brought or recovered against the Railways by reason of any act or omission of the contractor, his agents or employees, in relation to the Letter of Credit (LC). All sums payable/borne by Railways on this account shall be considered as reasonable compensation and paid by Contractor.
(f)The LC terms and conditions shall inter-alia provide that Railways will issue a Document of Authorisation after passing the bill for completed work, to enable contractor to claim the authorized amount from their bank. (g)The acceptable, agreed upon document for payments to be released under the LC shall be the Document of Authorisation. (h)The Document of Authorisation shall be issued by Railway Accounts Office against each bill passed by Railways. (i)On issuance of Document of Authorisation, a copy of Document of Authorisation shall be posted on IREPS for download by the contractor. A digitally signed copy of Document of Authorisation shall also be sent by Railway Accounts Office to Railway's bank (Local SBI Branch). (j)The contractor shall take print out of the Document of Authorisation available on IREPS and present his claim to his bank (advising Bank) for necessary payments as per LC terms and conditions. The claim shall comprise of copy of Document of Authorisation, Bill of Exchange and Bill. (k)The payment against LC shall be subject to verification from Railway's Bank (Local SBI Branch). (l)The contractor's bank (advising bank) shall submit the documents to the Railways Bank (Local SBI Branch). (m)The Railway's bank (issuing bank) shall, after verifying the claim so received w.r.t. the digitally signed Document of Authorisation received from Railway Accounts Office, release the payment to contractor's bank (advising bank) for crediting the same to contractor's account. (n)Any number of bills can be dealt within one LC, provided the sum total of payments to contractor is within the amount for which LC has been opened. (o)The LC shall shall be closed after the release of final payment including PVC amount, if any, to the contractor. (p)The release of performance guarantee or security deposit shall be dealt directly by Railway with the contractor i.e., not through LC
Improvement to Station building, Platform Shelter and Platform Surface in NSG-6 Stations in Coimbatore(CBE) over Salem Division-Electrical Arrangements.
SA-E15-2025-26-W5~SR
SA-E15-2025-26-W5
Open
Works - General
6 Months
Salem, Tamil Nadu
₹0
₹14,800
20 Mar 2026
19 Feb 2026
6 Mar 2026
51 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 7,41,115 | ||
| — | 450.00 | — | — | ||
| Supply and concealing of rigid PVC conduits of 20 mm Dia confirming to IS 9537/P3/1983 or latest (ISI marked) with wall thickness not less than 2.0mm along with the all accessories like bend, junction box etc and including cutting the wall/ceiling/chipping with re plastering and finishing the surface including painting to restore it to its original condition complete as directed by Engineer in charge at site. | — | — | — | 24,300 | |
| — | 860.00 | — | — | ||
| Supply and concealing of rigid PVC conduits of 25 mm Dia confirming to IS 9537/P3/1983 or latest (ISI marked) with wall thickness not less than 2.0mm along with the all accessories like bend, junction box etc and including cutting the wall/ceiling/chipping with re plastering and finishing the surface including painting to restore it to its original condition complete as directed by Engineer in charge at site. | — | — | — | 53,320 | |
| — | 135.00 | — | — | ||
| Supply and wiring by 5 nos of 10.0 sq.mm (3 phase) PVC insulated FRLS type flexible copper cable conforming to IS.No:694,1100 V grade through PVC conduit pipe already fixed. The Color coding shall be followed as directed by Engineer in charge at site(5 nos of 10.0 sq.mm copper cable shall be taken as 1 Mtr for measurement purpose). | — | — | — | 60,345 | |
| — | 155.00 | — | — | ||
| Supply and wiring including termination by 3 nos. of 6 sqmm PVC insulated fire retardant low smoke (FRLS) flexible copper cable conforming to IS. No: 694, 1100 V grade through the existing PVC pipe already laid, Color coding shall be followed as directed by Engineer in charge at site(3 nos. of 6 sqmm copper cable wire shall be taken as 1 m for measurement purpose) | — | — | — | 32,550 | |
| — | 225.00 | — | — | ||
| Supply and wiring including termination by 3 nos. of 4 sqmm PVC insulated fire retardant low smoke (FRLS) flexible copper cable conforming to IS. No: 694, 1100 V grade through the existing PVC pipe already laid, Color coding shall be followed as directed by Engineer in charge at site (3 nos. of 4 sqmm copper cable wire shall be taken as 1 m for measurement purpose). | — | — | — | 39,150 | |
| — | 1100.00 | — | — | ||
| Supply and wiring including termination by 3 nos of 2.5 sqmm PVC insulated fire retardant low smoke (FRLS) flexible copper cable conforming to IS.No:694,1100 V grade through the existing PVC pipe already laid,(3 nos of 2.5 sqmm copper cable wire shall be taken as 1m for measurement purpose). | — | — | — | 1,37,500 | |
| — | 1080.00 | — | — | ||
| Supply and wiring including termination by 3 nos of 1.5 sqmm PVC insulated fire retardant low smoke (FRLS) flexible copper cable conforming to IS.No:694,1100 V grade through the existing PVC pipe already laid,including one Green color wire for earth.(3 nos of 1.5 sqmm copper cable wire shall be taken as 1m for measurement purpose). | — | — | — | 1,18,800 | |
| — | 165.00 | — | — | ||
| Supply, installation, testing and fixing of ISI-marked 3-plate ceiling rose, including provision of heavy-duty PVC dummy sheet and PVC junction box, with proper termination of incoming/outgoing wires using suitable thimbles, ensuring firm contact and earthing continuity, complete with all accessories, labour and materials, as directed by the Engineer-in-Charge. | — | — | — | 3,960 | |
| — | 5.00 | — | — | ||
| Supply at site, fixing, testing and commissioning of 12 way modular switch box with concealed metallic flush box as base, mounting plate (modular white plate) confirming to latest IS specification complete in an approved manner. The boxes are to be fixed firmly after doing the following works at the location where the boxes are to be fixed: (1) Required opening for fixing the modular metallic switch box to be made by cutting the wall without causing major damage to wall (2) Unwanted projections are to be chipped and the wall surface is to be made even, (3) The wall surface is to be plastered to the present level of the wall surrounding the board. (4) The gap between box and wall surface to be filled with suitable filling material. | — | — | — | 2,205 | |
| — | 5.00 | — | — | ||
| Supply at site, fixing, testing and commissioning of 08 way modular switch box with concealed metallic flush box as base, mounting plate (modular white plate) confirming to latest IS specification complete in an approved manner. The boxes are to be fixed firmly after doing the following works at the location where the boxes are to be fixed: (1) Required opening for fixing the modular metallic switch box to be made by cutting the wall without causing major damage to wall (2) Unwanted projections are to be chipped and the wall surface is to be made even, (3) The wall surface is to be plastered to the present level of the wall surrounding the board. (4) The gap between box and wall surface to be filled with suitable filling material. | — | — | — | 1,765 | |
| — | 15.00 | — | — | ||
| Supply at site, fixing, testing and commissioning of 06 way modular switch box with concealed metallic flush box as base, mounting plate (modular white plate) confirming to latest IS specification complete in an approved manner. The boxes are to be fixed firmly after doing the following works at the location where the boxes are to be fixed: (1) Required opening for fixing the modular metallic switch box to be made by cutting the wall without causing major damage to wall (2) Unwanted projections are to be chipped and the wall surface is to be made even, (3) The wall surface is to be plastered to the present level of the wall surrounding the board. (4) The gap between box and wall surface to be filled with suitable filling material. | — | — | — | 4,110 | |
| — | 10.00 | — | — | ||
| Supply at site, fixing, testing and commissioning of 04 way modular switch box with concealed metallic flush box as base, mounting plate (modular white plate) confirming to latest IS specification complete in an approved manner. The boxes are to be fixed firmly after doing the following works at the location where the boxes are to be fixed:(1) Required opening for fixing the modular metallic switch box to be made by cutting the wall without causing major damage to wall (2) Unwanted projections are to be chipped and the wall surface is to be made even, (3) The wall surface is to be plastered to the present level of the wall surrounding the board. (4) The gap between box and wall surface to be filled with suitable filling material. | — | — | — | 2,350 | |
| — | 15.00 | — | — | ||
| Supply at site, fixing, testing and commissioning of 02 way modular switch box with concealed metallic flush box as base, mounting plate (modular white plate) confirming to latest IS specification complete in an approved manner. The boxes are to be fixed firmly after doing the following works at the location where the boxes are to be fixed:(1) Required opening for fixing the modular metallic switch box to be made by cutting the wall without causing major damage to wall (2) Unwanted projections are to be chipped and the wall surface is to be made even, (3) The wall surface is to be plastered to the present level of the wall surrounding the board. (4) The gap between box and wall surface to be filled with suitable filling material. | — | — | — | 2,115 | |
| — | 190.00 | — | — | ||
| Supply at site, fixing, testing and commissioning of 1 way 6A modular switch confirming to latest IS specification complete on the appropriate modular switch boxes already erected including internal wiring connection in the modular switch box complete in an approved manner as per the section in charge's instruction. | — | — | — | 14,440 | |
| — | 15.00 | — | — | ||
| Supply at site, fixing, testing and commissioning of 1 way 16A modular switch confirming to latest IS specification complete on the appropriate modular switch boxes already erected including internal wiring connection in the modular switch box complete in an approved manner as per the section in charge's instruction. | — | — | — | 1,710 | |
| — | 15.00 | — | — | ||
| Supply at site, fixing, testing and commissioning of Dummy plate suitable for modular box mentioned in the schedule No;9-13 wherever required with necessary fixing arrangements in approved manner as directed by the Engineer in-charge at site. | — | — | — | 375 | |
| — | 5.00 | — | — | ||
| Supply at site, fixing, testing and commissioning of modular type socket 6Asocket, 2/3Pin, flush confirming to latest IS specification complete on the appropriate modular boxes already erected including internal wiring connection and earth connection to earth terminal in switch board by 1.5sqmm PVC insulated single core copper conductor complete in an approved manner as per the section in charge's instruction. | — | — | — | 570 | |
| — | 15.00 | — | — | ||
| Supply at site, fixing, testing and commissioning of modular type socket 16Asocket, 5/3Pin, flush confirming to latest IS specification complete on the appropriate modular boxes already erected including internal wiring connection by 4.0sqmm PVC insulated single core copper conductor and earth connection to earth terminal in switch board in an approved manner as per the section in charge's instruction. | — | — | — | 2,250 | |
| — | 60.00 | — | — | ||
| Supply, Fixing, testing and commissioning of LED Batten light with complete fixtures having 20W with available LED Efficacy of minimum 125 (Lumen / Watt), Color Temperature (in K) of 6500 (Cool white), Aluminium extruded housing, with Inbuilt Driver/Control gear, Ingress Protection of IP-20, Operating Voltage range of 100 to 300 V, Frequency 50 Hz with minimum 50000 burning hours and SPD> 4kV and above. The fitting shall be fixed with Round block with patterns on side wall/ceiling with wiring by 3C x 1.0 sqmm PVC insulated & sheathed round flexible copper cable in an approved manner as directed by Engineer in charge at site. The Warranty for the LED Light fitting will be 5 years and the payment condition will be followed as per Special condition-II para no: 31. | — | — | — | 22,200 | |
| — | 25.00 | — | — | ||
| Fixing, testing and commissioning of Exhaust fan including wall opening, fixing of frame and plastering as required for housing. Exhaust fan including wiring with 3C x 1.0 sq.mm PVC insulated & sheathed copper flexible cable. Note: Necessary Exhaust fan only will be supplied by Railways. | — | — | — | 9,750 | |
| — | 30.00 | — | — | ||
| Supply and fixing of Angular/Batten holder with 9W LED Lamp with IS mark and the LED lamp should be B22 lamp,90 lumens/watts,colour temperature 6500K including wiring and fixing on side wall/roof as per site requirement complete in an approved manner and as directed by Engineer in charge at site.The Warranty for the LED Light fitting will be 5 years and the payment condition will be followed as per Special condition-II para no: 31. | — | — | — | 3,540 | |
| — | 15.00 | — | — | ||
| Supply, erection and testing of L.T. Earthing arrangements duly stencilling of earth resistance value along with date as per Drg. no. CEE/CN/MS/16-2004, including supply and spreading of salt and charcoal 5 kgs in each for earth treatment etc , including supply / leading / laying /burying and concealing of 4 SWG GI wire from earth electrode to proposed MDB / SDB or elsewhere in an approved manner as directed by Section Engineer in charge at site. | — | — | — | 86,880 | |
| — | 15.00 | — | — | ||
| Fixing, testing and commissioning of BLDC fan in the existing fan hook including wiring with 3 C X 1.0 sq.mm PVC insulated & sheathed copper flexible cable in an approved manner and as directed by Engineer in charge at site. (Note: BLDC fan only will be supplied by Railways.) | — | — | — | 2,565 | |
| — | 5.00 | — | — | ||
| Supply at site, erection, testing & commissioning of vertical flush/ wall mounting type , powder coated sheet steel , phosphatised double door 8 Way phase selector distribution board with selector switches indicating lights duly wired with 8 way incomer provision, with supply and fixing of 1 Nos. of 63 amps FP MCB with 10 KA breaking capacity, and 4P RCCB 63A with tripping sensitivity of 30mA as incoming control with 12 no of SP 6-32A MCB with 10 KA breaking capacity and 6 no of 6- 32A DP MCB with 10 KA breaking capacity as outgoing control, including internal wiring by suitable wire and incoming cable termination using suitable terminal block with suitable cable gland, earthing / neutral din channel complete with all accessories duly making necessary opening on the wall and masonry work for controlling power/lighting/fan circuits in each building in an approved manner as directed by the section in charge at site.. Note: 1.Bi-metallic washers must be provided for AL & Cu joints and for others GI bolts, Nuts & washers must be used. 2.Cable termination shall be using GI bolts & nuts with flat and spring washers &lugs invariably. 3. Board shall be fixed in concealed manner. | — | — | — | 82,650 | |
| — | 5.00 | — | — | ||
| Supply at site, erection, testing & commissioning of wall mounting type , powder coated sheet steel , SPN MCB 12 Way distribution board phosphatised and powder coated, double door with supply and fixing of 1 Nos. of 32 amps DP RCBO with 10kA short circuit capacity and 30mA sensitivity, as incoming control with 8 no of SP 6-32A MCB with 10 KA breaking capacity as outgoing control, including internal wiring by suitable wire and incoming cable termination using suitable terminal block with suitable cable gland, earthing / neutral din channel complete with all accessories duly making necessary opening on the wall and masonry work for controlling power/lighting/fan circuits in each building in an approved manner as directed by the section in charge at site.. Note: 1.Bi-metallic washers must be provided for AL & Cu joints and for others GI bolts, Nuts & washers must be used. 2.Cable termination shall be using GI bolts & nuts with flat and spring washers &lugs invariably. 3. Board shall be fixed in concealed manner. | — | — | — | 31,715 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .