Renovation of Brahmaputra State Guest House, Kharghuli, Guwahati-01 , Assam

Amount

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 15.12.1 Of area 3 sq. metres and below

Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : 15.14.1 Of sectional area 40 square centimetres and above

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.15.7.4 In cement mortar

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 15.23.1 For thickness of tiles 10 mm to 25 mm

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 6.13.1 Cement mortar 1:3 (1 cement :3 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix: 13.5.1 1:4 (1 cement: 4 coarse sand)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Centering and shuttering including strutting, propping etc. and removal of form for 5.9.21 Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I.12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 9.1.1 Second class teak wood

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :9.72.1 125x85x5.5 mm (heavy type)

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 9.74.1 250x10 mm

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing bright finished brass handles with screws etc. complete: 9.81.1 125 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily..11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size11.41A.2 Glazed vitrified floor tiles polished finish of size 11.41A.2.1 Size of Tile 600 x 600 mmm

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : 13.43.1 Water thinnable cement primer

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: 13.98.1 One or more coats on old work

Finishing walls with Acrylic Smooth exterior paint of required shade : 13.111.1 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.)

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :13.48.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) External work 18.9.3 25 mm nominal dia Pipes

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.17.1 25 mm nominal bore

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipe 12.41.2 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 12.42.3 Single tee with door

Bend 87.5° 12.42.5.2 110 mm bend

Coupler 12.42.1.2 110 mm

Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):21.3.3 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm)

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete.

Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point lockingNote: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. 9.147C.1 Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc.

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.

Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

Cleaning of under ground sump, Over Head R.C.C. Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 12.1.3 0.63 mm thick with zinc coating not less than 275 gm/ m²

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.1 Hot finished welded type tubes

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.12.7.2 0.63 mm thick with zinc coating not less than 275 gm/m²

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.8.3.2 Granite work

Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.

Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). 12.26.1 6 mm thick Cement fiber board as per IS: 14862

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.17.2 40 m

Providing and fixing of Jaquar WASTE COUPLING 32MM SIZE FULL THREAD WITH 130MM HEIGHT (ALDCHR- 705L130) as directed by the concerned Department.

Providing and fixing of Jaquar ANGULAR STOP COCK WITH WALL FLANGE (FLR-CHR-5053N) as directed by the concerned Department.

Providing and fixing of Jaquar 15 mm Bib Taps conformingto IS:8931;Latest as directed by the concerned Department.

Providing erecting cutting fitting and fixing of laminated finished wall panelling in the room wall/column, to be made with Pasting 12 mm Plywood on one side of saal wood frame (300 mm C/c bothways) at wall surface and pasting of 1.5 mm thick decorative laminated sheet on plyboard surface with tape,adhesive,nails, etc.,the work is complete with all necessary hardware materials and labour as per directed by the concerned department.

Providing and fixing of Jaquar FIRE SHIELD Portable FireExtinguishers as per IS 15683 (2018)Low Pressure Extinguisher (ServicePressure ≤19 bar) Powder Based (asper IS 4308 ) Class -A FIRE SHIELD (ABC 6KG CT) as directed by the concerned Department.

Providing erecting cutting fitting and fixing of laminated finished wall panelling in the room wall/column, to be made with Pasting 12 mm Plywood on one side of saal wood frame (300 mm C/c bothways) at wall surface and pasting of 6 mm MDF board on plyboard surface with tape,adhesive,nails, etc.,the work is complete with all necessary hardware materials and labour as per directed by the concerned department.

Providing erecting cutting fitting and fixing of laminated finished wall panelling in the column, beam to be made with Pasting 25 mm MDF with requried moulding deisgn on one side of saal wood frame (300 mm C/c bothways) at wall surface with tape,adhesive,nails, etc.,the work is complete with all necessary hardware materials and labour as per directed by the concerned department.

Providing fitting and fixing of Stainless Steel Railing with wooden Balustred and 12 mm Toughen glass with wood and the work is complete with all necessary hardware materials and labour as per directed by the concerned department.

Wall painting with Duco paint of approved brand and manufacture on new surface to give an even shade after throughly brushing the surfaces free from foreign matter & sand papered smooth and than applied duco putty, primer as directed by the concerned department.

Providing and fixing of GLOCERA DOSOLO EWC ONE PC CLOSET 300MMSTAR WHITE as directed by the concerned Department.

Providing and fixing of DOSOLO EWC ONE PC CLOSET 220MM STAR WHITE as directed by the concerned Department.

Providing and fixing of GLOCERA CUBE ART WASH BASIN STAR WHITE. as directed by the concerned Department.

Providing and fixing of GLOCERA PIANO SEMI PEDESTAL BASIN STAR WHITE as directed by the concerned Department.

Providing and fixing of GLOCERA DUNE WASH BASIN WHITE as directed by the concerned Department.

Providing and fixing of GLOCERA NEO LARGE URINAL STAR WHITE as directed by the concerned Department.

Providing and fixing of Jaquar WASTE COUPLING 32MM FULL THREAD (ALD-CHR-705) as directed by the concerned Department.

Providing and fixing of Jaquar 2-WAY BIB COCK WITH WALL FLANGE (FLR-CHR-5041N) as directed by the concerned Department.

Providing and fixing of Jaquar HAND SHOWER (HEALTH FAUCET) WITH 8MM DIA 1.2METER LONG FLEXIBLE TUBE AND WALL HOOK (ALD-CHR-573) as directed by the concerned Department.

Providing and fixing of Jaquar TOWEL RING ROUND WITH ROUND FLANGE (ACNCHR-1121BN) as directed by the concerned Department.

Providing and fixing of Jaquar MINI SINGLE LEVER BASIN MIXER WITH 25MM CARTRIDGE & 450MM BRAIDED HOSES BUT WITHOUT POP UP WASTE SYSTEM (FLR-CHR-5025B) as directed by the concerned Department.

Providing and fixing of Jaquar PILLAR COCK (FLR-CHR-5011N ) as directed by the concerned Department.

Jaquar 600MM LONG BRAIDED HOSES WITH TWO 15MM NUTS & RUBBER WASHERS WITHOUT NIPPLE (SUITABLE FOR GEYSERS) (ALD-CHR-807B) as directed by the concerned Department.

Providing and fixing of Jaquar SINGLE LEVER EXPOSED PARTS KIT OF HI-FLOW DIVERTER CONSISTING OF OPERATING LEVER CARTRIDGE SLEEVE WALL FLANGE (WITH SEALS) BUTTON ASSEMBLY SLEEVE & BUTTON (COMPATIBLE WITH ALD-079N) (FLRCHR- 5079NK) as directed by the concerned Department.

Providing and fixing of Jaquar MAZE OVERHEAD SHOWER 200X200MM SQUARE SHAPE SINGLE FLOW (BODY & FACE PLATE STAINLESS STEEL WITH CHROME FINISH) WITH RUBIT CLEANING SYSTEM as directed by the concerned Department.

Providing and fixing of Jaquar BATHTUB SPOUT WITH WALL FLANGE STAINLESS STEEL as directed by the concerned Department.

Providing and fixing of Jaquar SINGLE LEVER BASIN MIXER WITHOUT POPUP WASTE SYSTEM WITH 450MM LONG BRAIDED HOSES as directed by the concerned Department.

Providing and fixing of Jaquar SINK COCK WITH REGULAR SWINGING SPOUT (WALL MOUNTED MODEL) WITH WALL FLANGE as directed by the concerned Department.

Providing and fixing of Jaquar SINGLE PIECE WC WITH UF SOFT CLOSE SLIM SEAT COVER HINGES DUAL FLUSH CISTERN FITTING FIXING ACCESSORIES AND ACCESSORIES SET SIZE: 370X670X720 MM S TRAP-220 MM as directed by the concerned Department.

Providing and fixing of Jaquar SINGLE PIECE WC WITH UF SOFT CLOSE SLIM SEAT COVER HINGES DUAL FLUSH CISTERN FITTING FIXING ACCESSORIES AND ACCESSORIES SET SIZE: 370X670X720 MM S TRAP-220 MM as directed by the concerned Department.

Providing and fixing of Jaquar RIMLESS WALL HUNG WC WITH PP SOFT CLOSE SLIM SEAT COVER HINGES ACCESSORIES SET SIZE:355X555X3 70 MM as directed by the concerned Department.

Providing and fixing of Jaquar COUNTER TOP BASIN SIZE:500X435X180 MM as directed by the concerned Department.

Providing and fixing of Jaquar 450MM LONG BRAIDED HOSE WITH TWO 15MM NUTS & RUBBER WASHERS WITHOUT NIPPLE (SUITABLE FOR GEYSERS) as directed by the concerned Department.

Providing and fixing of Jaquar SINGLE PIECE WC WITH UF SOFT CLOSE SLIM SEAT COVER HINGES DUAL FLUSH CISTERN FITTING FIXING ACCESSORIES SIZE: 360X655X765 MM P TRAP-180 MM as directed by the concerned Department.

Providing and fixing of Jaquar TABLE TOP BASIN SIZE: 500X425X130 MM as directed by the concerned Department.

Providing and fixing of Jaquar TOILET ROLL HOLDER as directed by the concerned Department.

Providing and fixing of Jaquar TOWEL RACK 600MM LONG WITH LOWER HANGERS, STAINLESS STEEL as directed by the concerned Department.

Providing and fixing of Jaquar ELENA MANUAL STORAGE WATER HEATER 15 LITRE CAPACITY VERTICAL INSTALLATION as directed by the concerned Department.

Providing and fixing of Jaquar WASTE COUPLING 32MM SIZE FULL THREAD WITH 130MM HEIGHT (ALD CHR- 705L130) as directed by the concerned Department.

Providing and fixing of Jaquar ANGULAR STOP COCK WITH WALL FLANGE (FLR-CHR-5053N) as directed by the concerned Department.

Providing and fixing of Jaquar ANGULAR STOP COCK WITH TRIANGULAR HANDLE AND WALL FLANGE as directed by the concerned Department.

Providing and fixing of GLOCERA PRIME FULL PEDESTAL STAR WHITE as directed by the concerned Department.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 6 sq. mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 2 way 5/6 amps switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 amp switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 pin 15/16 amp socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. TV antenna socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Bell push

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 3 Module (100mmX75mm)

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 4 Module (125mmX75mm)

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 6 Module (200mmX75mm)

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 8 Module (125mmX125mm)

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 12 Module (200mm X 150mm)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 3 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 4 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 6 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 8 Module

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 12 Module

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying, installation, testing and commissioning of 3Tr. Normal Cassette AC(3Phase)(Make- Carrier or equivalent)

Supplying, installation, testing and commissioning of 4Tr. Normal Cassette AC(3Phase)(Make- Carrier or equivalent)

Supplying, installation, testing and commissioning of the Hi wall split type inerter model VOLTAS/Carrier make AC with cordless remote complete indoor and outdoor unit ( 1.50 Ton).

Supplying, installation, testing and commissioning of the Hi wall split type inerter model VOLTAS/Carrier make AC with cordless remote complete indoor and outdoor unit ( 2.00 Ton).

Supplying, installation, testing and commissioning of the 25 A Starter for Air Conditioner ( Make Havells or equivalent

Supplying,with fitting fixing of LED luminiarie fitting with150 Watts for High Bay lighting including making necessary connection as approved specified and directed by deptt. (Make-Jaquar or equivalent as directed by the deptt.)

Supplying,with fitting fixing of LED street light luminiarie fitting with 120 Watts , including making necessary connection as approved specified and directed by deptt. (Make- Bajaj or equivalent as directed by the deptt. )

Supplying,with fitting fixing of Flood light luminiarie fitting with 250 W LED including making necessary connection as approved specified and directed by deptt. (Surya or equivalent make as directed by the deptt. )

Supplying,with fitting fixing of LED garden light luminiarie Ballard fitting with 10 Watts including making necessary connection as approved specified and directed by deptt (Surya or equivalent make as directed by the deptt. )

Supplying,with fitting fixing of 1200 mm sweep ceiling fan including making necessary connection as approved specified and directed by deptt. (Without regulator).

Supplying of 10 sq mm, 3.5 Core Solid Aluminum conductor upto 10.0 sq.mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed for Multicore Cables, Unarmoured / Armour (1. Single core Cables - Aluminium wire upto 70.0 sq.mm balance Aluminum strip, 2. Glavanised wire for cables upto 2Cx10.0 sq.mm, 3Cx10.0 sq.mm, 4Cx6.0 sq.mm balance all galvanised steel strip), extruded PVC Type ST2 sheathed, 650/ 1100 V grade as per IS 7098 (Part 1) 1988..

Supplying,with fitting fixing of recessed type down lighter luminiarie fitting with 15 W LED including making necessary connection as approved specified and directed by deptt. (Crompton make or equivalent )

Supplying,with fitting fixing of 40 Watts LED Batten luminiarie including making necessary connection as approved specified and directed by deptt. (Crompton make or equivalent make)

Supplying,with fitting fixing of LED Spot Light with 30000 burning hours with CRI>80, Model No- CDR-210-03-40-SL-NWH

Supplying,with fitting fixing of LED 24 Watts Panel Light (Make- Crompton or equivalent as directed by the govt.)

Supplying,with fitting fixing of LED Bedside light luminiarie fitting including making necessary connection as approved specified and directed by deptt.

Supplying,with fitting fixing of LED chadeler light luminiarie made of brass material (small) including making necessary connection as approved and specified and directed by deptt.

Supplying,with fitting fixing of LED chadeler light luminiarie made of brass material (Big) including making necessary connection as approved specified and directed by deptt.

M/S CAPITAL OVERLAYS