Proposed work for Relay Room Modifications/Extensions or New Cosntrucitons for KavachEquipment in LD-UBL-ASK Section

Item Breakup - A-Engineering(DSR-2023)

Item Breakup - B-Engineering(Non-DSR)

Design, installation of prestressed precast RCC Foot structure for ABS hut (6.0 m x 4.0 m), including foundation and finishing works such as plastering, painting, etc., as per standard drawings and relevant IS codes. The design shall adopt suitable foundation and superstructure based on site conditions, determined through soil testing conducted by NABL-approved laboratories. The design shall be proof-checked by M/s RITES. All materials used shall conform to approved specifications and IS code standards. Final precast quantity will be based on the actual square feet (Sqft) of roof slab. Reference: L.O.A No. Vijayawada Division - Gati Shakthi / BL-SG-GS-07-2023- 24 / 10380650093059 dated 12/12/2023 Cost Details: Amount: 39,71,977/- (Item No. 01 of Schedule-G Engineering portion) Quoted rate with 5.49 % : 2,18,061 + 39,71,977 = 41,90,038/- Unit Details: One unit of ABS Hut size: 12.5x5.6=70Sqm753.2 Sqft Rate Calculation: Rate per Sqft = 41,90,038 ÷ 753.2 = 5562.98 (Say 5563 / -) Total 8622650.00

Item Breakup - C-Electrical (Non-SOR)

Laying of one number PVC insulated and Metre PVC sheathed / XLPE power cable of 1.1 KV grade of upto 35 sq. mm size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.

Supplying and making end termination with Each brass compression gland and aluminium lugs for 25 Sqmm size, 4 core PVC insulated and PVC sheathed /XLPE aluminium conductor cable of 1.1 KV grade as specified and directed.

Supplying and fixing following way, Each horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections. powder painted including earthing etc. as required-4 way (4 + 12), Double door UBL-PROJECT-S AND T/SOUTH WESTERN RLY

Supplying and fixing 5 A to 32 A rating, Each 240/415 V, 10 KA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required- Triple pole and neutral.

Wiring for circuit/ submain wiring alongwith Metre earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq mm earth wire

Wiring for light point/ fan point/ exhaust fan Numbers 243.00 point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required

Supply and fixing of 20 W, 240 V Batten Numbers 135.00 LED Light Fitting with diffuser and driver including all connected materials as per specification enclosed

Supply & fixing of BLDC ceiling Fans, Numbers working on 230 V AC, 50 Hz of Sweep size, 1200 MM with detailed technical specification.

Supply and fixing of 12" Sweep (300 mm) Numbers 1440 rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete with all accessories etc.

Supplying and fixing suitable size Gl box Numbers with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required

Supply and fixing of 70 W, LED Street light Numbers fitting as per detailed specification

Provision of Earth Electrodes as per RDSO Numbers Drawing No.SG/SWR/057 and Earthing of metallic sheath and armour of all cables in all apparatus cases, relay room, equipment room, ASM room for block and control, and earthing of all equipment's in apparatus cases, power room, relay rack, cable termination rack, control panel, signals, lever frames with MS of flat 35mm X 6mm or 19c cable (MS flat for closer by areas and MS flat/19c cable combination for farther areas) as per the instructions of Railway representative at site. The work includes painting of earth resistance value on the earth pit. (Supply of 19C cable is not covered in the scope of this schedule). [MS flat for earthing 35mm X 6mm, cement, GI earth electrodes, common salt, charcoal, country bricks, river sand, soldering materials and all other miscellaneous materials required for the work shall be supplied by the Contractor].

Supply of 4 x 25 sqmm LT 1100 V grade, Metre armoured, XLPE aluminium Cable conforming to IS:7098 part-1 (amendment 1 or latest) and as per technical specification. UBL-PROJECT-S AND T/SOUTH WESTERN RLY

Provision of one-year subscription for an Year advanced AI-based digital assistance platform capable of supporting day-to-day office productivity, technical documentation, data analysis, and automated response generation. The system should be able to handle large text inputs, generate structured reports, assist in drafting official communications, and improve efficiency in technical and administrative tasks. It should provide access to enhanced computational models, allow higher usage limits, and support organized management of multiple work projects and documents. The solution is expected to improve accuracy, reduce manual effort, and ensure faster completion of routine as well as complex tasks over the subscription period of one year, make: Claude AI Pro or better.

Supply, Commissioning of 2 x 10 kVA True Online UPS systems for separate independent operation, having minimum 2 hours backup at full load condition with suitable VRLA battery bank, complete with battery racks, UPS stands, suitable MCBs, ELCB, SNMP card, surge protection, cabling, earthing and all accessories as per attached detailed technical specifications. UPS shall be 1 Phase in / 1 Phase out, 230V AC pure sine wave output, efficiency >90%, DSP/microprocessor controlled with LCD display and communication ports. Makes: APC / Numeric / Vertiv Liebert or equivalent. Complete with installation, testing, commissioning and RITES inspection.

Supply, Transportation of Wall Mount Type Numbers Split Air Conditioner, 5 Star rated, inverter type, capacity 1.5 Ton, conforming to IS 1391 (Part 2) with R-32 refrigerant, complete with copper piping, drain pipe, power cable, remote and all standard accessories. The work includes installation of indoor and outdoor units, interconnection, testing and commissioning complete as per specifications and direction of Engineer-in-charge.

Supplying and fixing suitable size GI box Numbers with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required

Supplying and fixing 5 A to 32 A rating, Each 240/415 V, 10 KA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required- Double Pole.

Installationcharges airconditioner withallied works forone indoor andone outdoor unit isto be mounted onsuitable Angle Ironsupport upto 3.0Ton split/cassettetype A/C. UBL-PROJECT-S AND T/SOUTH WESTERN RLY

Supply of voltage stabilizer suitable for 1.5 Each Ton AC, Working voltage : 170 V to 270 V, 12 Amps, Time delay : ITDS 3 Min+ 20 sec with thermal overload protection and high voltage cut-off all as per the direction and requirement of the Engineer in charge. Total 2529192.72