SITC of 86 nos SAC units CTD

Supply of 1.5 TR Inverter type 5 Star rated split Air-Conditioner unit having Nominal cooling capacity of 4536 Kcalhr (5275 watts) and as per BEE star rating minimum ISEER of 5.6 with temperature control thermistor, remote control unit, filters, rotary scroll swing type compressor, copper tubes for both indoor and outdoor unit, Refrigerant gas with topping up of refrigerant if required, transportation of all of the above to the various sites and supplying the following up to the length of 3 mtrs. etc as required. 1 Hot and cold refrigerant piping. 2 Suitable connecting electrical cable between indoor and outdoor unit.3 PVC drain pipe of suitable size. Note 1 The manufacturers Suppliers shall give a warranty of the air conditioner for 15 months from date of supply or 12 months from date of installation, which is earlier. Thereafter 4 years (48 months) additional warranty on the compressor and Indoor andOutdoor units PCB.

Dismantling of existing Split AC unit - indoor and outdoor units along with interconnecting cu pipe and cable, power connection cable etc. and storing at place shown by Exch. in charge etc. as reqd.

Installation, Testing and commissioning of 1.5 TR 5 star inverter type split AC unit along with Hot and cold refrigerant copper piping, copper conductor flexible connecting electrical cable & PVC drain pipe up to the standard length of 3 mtrs. (as supplied under Item 1) including leak testing entire system, gas charging, insulating the refrigerant pipe and making opening in wall and making good the damages, making power supply connections from the power point etc. complete as required.

Providing and fixing of additional refrigerant copper piping i. e. for Hot gas and cold liquid line of suitable size to match with the pipeline of the new split AC units, over and above 3 mtrs length wherever required along with suitable size rubber foam insulation on surface of the wall ic necessary flare nuts, suitably brazing with the existing pipe, clamping, making holes in walls and additional gas charging if required etc. as per site requirement complete as reqd. NOTE The length of refrigerant pipes supplied with each AC units is 3 Mtrs. Extra length shall be paid extra for which firm shall quote their unit rates. Only single run will be measured for both (i. e. hot gas and cold liquid line refrigerant pipes.

Supplying and laying 4 core 2.5 sq.mm. PVC insulated and PVC sheathed flexible copper cable along with refrigerant pipe or along with existing conduit cable tray ic binding with plastic tags for extending supply from existing industrial socket to indoor unit etc. as required. Make any ISI mark Note the length of Copper Cable supplied with each unit is 3 Mtrs. Extra length shall be paid extra for which firm shall quote their unit rates.

Supplying and fixing of iron stand made out of 40mm x 40mm x 5mm thick angle iron for mounting outdoor unit of the above AC as per manufacturer i/c providing other necessary hardware, painting etc. complete as required.

Supplying & fixing of Powder Coated MS frame stand comprising of Two numbers bracket made of heavy duty MS Sheet to accommodate the Condenser (Outdoor) unit for fixing on the wall with suitable diameter and length of Anchor fast bolts and making good the damages etc. as per site requirement.

Supplying and Fixing of 25 mm dia ISI mark heavy duty PVC pipe with accessories for drain water connection, over and above 3 mtrs length wherever required etc. complete as required.