MECHANISED APPLICATION OF FINISHES AND CERTAIN PERIODICAL SERVICES TO JCOS /OR MARRIED ACCNS INCLUDING PLASTERING REPAIR WORKS AT CERTAIN PLACES OF AGE B/R-I UNDER GE (EAST) AGRA

Amount

Complete removal of existing treatment on wall/ roof projections including facia,cornices etc by scrapping, washing,rubbing down and stopping of distempered and painted surfaces make surface clean, free from dust,loose paint etc by skilled labour complete all as specified and directed.

M&L for one coat of acrylic water based exterior grade primer @0.9 ltr (undiluted) 10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray Machine of paint application with a flow speed of min 1 It per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. Note :- (a.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manutacturer of which the materials .i.e. Paint, Distemper, Putty etc, is proposed to be used by the contractor and approved by Garrison Engineer. (b) Cost of scafolding upto 10m hight of building is included in this item. (Make :Asian ,Breger and Nerolac)

M & L for preparing old plastered or unplastered surfaces of walls by brooming down or by steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts including at any height (not.exc 11mtr )incl necessary scaffolding /Centreing etc complete all as specified and directed.

M&L for two coat water based premium acrylic smooth exterior emulsion of approved Colour with silicon additive & Colour stay Technology. Excellent Dit Pick up resistance With low VOC less than 50 gram/ lite as per the LEEDS specifications, Anti Algal Properties in two coats @ 1.79 Itr (undiluted)/ 10 sqm diluted with water as per Manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 Ir per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. Note:- (a.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (b) Masking of window/doors during spray painting using polythene film will be included. (c) Rate quotated includes work at any height (not.exc 10 mtr) incl necessary scaffolding /Centreing etc and cleaning the waste materials and debris from out of MoD land as directed and complete.

M&L for preparation of old plastered surfaces of walls for applying two coat water based Ace exterior wall finish with silicon additives Asian Paints Ace meets the LEEDS VOC criteria as per Indian Green Building Council version 1.0 specifications, Anti Algal Properties or equivalent quality of exterior emulsion in other makes such as Berger paints, Nerolac paints in two coats @ 1.79 Iitre (undiluted)/ 10 Sqm diluted with water as per Manufacturer instructions applied over priming coat with fully automatic using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying Ace exterior wall finish should be able to spray in hard to reach areas and penetration of Ace exterior wall finish on the surface complete all as specified and directed. Note : Rate of this items includes the following works (necessary preparation as per manufactures instructions :- (a) CLEANING : surface should be free from any loose paint, dust or grease. Growths of fungus, algae or moss should be removed by wire brushing and water. In case of areas having excessive dampness use Asian Paints SmartCare Damp Block to limit further dampness. When the underlying surface exhibits chalkiness, in spite of thorough surface cleaning, use Asian Paints SmartCare Exterior Sealer. (b) FILLING FOR HOLES & DENTS In case of dents and holes use Asian Paints Wall Putty or white cement and fine sand in the ratio 1:3 Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. (Proper masking to be carried out before primer and paint application).

M & L for Preparation of old plastered surfaces of walls including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and applying one coats of cement base paint with fully automatic airless spray machine of paint application with a flow speed of min 1 lts per minute having a pressure including at any height (not.exc 11mtr )incl necessary scaffolding /Centreing etc complete all as specified and directed.

M & L for Preparation of old plastered surfaces of walls including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots on surface of wall and applying two coats of cement base paint of approved colour with fully automatic airless spray machine of paint application with a flow speed of min 1 lts per minute having a pressure including at any height (not.exc 11mtr ) incl necessary scaffolding /Centreing etc complete all as specified and directed.

M & L for preparing old plastered or unplastered surfaces of walls and applying one coats of Acrylic weather proof Exterior paint (Apex paint) on walls or concrete surfaces at any height (not.exc 11mtr) complete all as specified and directed.

M & L for preparing old plastered or unplastered surfaces of walls and applying two coats of Acrylic weather proof Exterior paint (Apex paint) on old plastered or old plastered surfaces of walls or concrete surfaces at any height (not.exc 11mtr) complete all as specified and directed.

M & L for preparing new plastered or untreated surfaces of walls and applying two coats of Acrylic weather proof Exterior paint (Apex paint) on walls or concrete surfaces including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces at any height (not.exc 11mtr) complete all as specified and directed.

M & L for applying one coats of Acrylic weather proof Exterior paint (Apex paint) on old plastered or old plastered surfaces of walls or concrete surface n.exc 30 cm wide including preparation of surfaces at any height (not.exc 11mtr) complete all as specified and directed.

M & L for preparing old plastered or unplastered surfaces of walls by brooming down or by steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and applying one coats of oil bound distamper complete all as specified and directed.

M & L for applying 3 mm thick wall care putty on wall surfaces complete and sanding of the putty surface with sand paper or other means by skilled labour and to make the surfaces smooth and free from dust etc. as per complete all as specified and directed.

M & L for complete removal old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper including over a coat of 3 mm thick wall care putty complete all as specified and directed.

M& L preparing old surfaces of ceiling and applying two coat of white wash on ceiling surface complete all as specified and directed.

M&L Preparing old surfaces and applying one coat of white wash on ceiling surface complete all as specified and directed.

M&L Preparing old plastered or unplastered surfaces and applying one coat of white wash and including add necessary synthetic adhesive lime binder as per manufactruer instructions on wall surfaces complete all as specified and directed.

M&L Preparing old plastered or unplastered surfaces and applying two coat of white wash and including add necessary synthetic adhesive lime binder as per manufactruer instructions on wall surfaces complete all as specified and as directed.

M&L for preparation of old painted steel surfaces & applying one coat of synthetic enamel paint on steel surface of any description over 10 cm in width or girth complete all as specified and as directed.

All as per item No 19 above but two coats synthetic enamel paint on steel complete all as specified and as directed.

M&L for preparation of old painted wood and wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

All as per item No 21 above but two coats synthetic enamel paint on wooden surfaces complete all as specified and as directed.

Note:- (a) For Item No 1.00 to 22.00 All the Materails to be Brought by Contractor and store in one place as per direction by Engr-in charge/GE, store will be issued to Contractor as per Site requirement for execution. (b) Every stage of painting to be passed by Engr-in charge before proceeding second coat/subsequent coats . (c) Masking of window/doors during spray painting using polythene film will be included. (d) Rate quotated includes work at any height (not.exc 12mtr) incl necessary scaffolding /Centreing etc and cleaning the waste materials and debris from out of MoD land as directed and complete.

M&L for writing/ letters to mention building details in displays card over wall surface,the dimention of display card should be 90 cm x60cm,location as decided by Engr-in-charge on the wall of each building.The display card shall indicate the following details by applying two coat of enamel painting as approved colour as specified and directed. *BLDG No/VINTAGE : ( Bldg No & Year) *PERIODICAL MAINT DONE ON :(Month 2024 /25) *LAST SPL REPAIRUNDERTAKEN ON : (Month & year) *ADDN/ALTN/ANY OTHER TYPE : OF WK CARRIED OUT WITH DATE :

Writing letters or figures ( Block, Roman, Italic or Indian) 10cm height complete all as specified and directed.

Writing Stops, commas, short lines, dashes, hyphens, brackets etc complete all as specified and directed.

Clearing of shrubs growth and trees on bldgs wall, chajja, and making good the damaged protion in CM 1:3 and match the existing surface complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick plastering in CM 1:6 on brick surfaces of walls & finishing the surface even & smooth complete all as specified and directed.

Material and labour for preparation of newly plastered wall surface and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work a coat of 3mm thcik wall interior wall care putty on wall surfaces complete and sanding of the putty surface with sand paper or other means by skilled labour and to make the surfaces smooth and free from dust etc. complete all as specified and directed.

M&L for 15mm thick plastering in CM 1:4 on brick surfaces of walls & finishing the surface even & smooth complete all incl water proofing compound all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer at any height (n.Exc 11m )incl necessary scaffolding /Centreing etc complete all as specified and directed.

Material and labour for Rendering 10 mm thick plastering in CM 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed.

Material and Labour for preparation of newly plastered ceiling surface and applying three coats of white wash, complete all as specified and directed.

M&L 5 mm average thickness of Ready mix plaster over brick or stone wall as well as on concrete surface for smoothing / prepration of surface etc complete all as specified and directed.

Demolition and breaking up drain PVC (SWR) pipes jointed in cement mortar/solvent, internal dia of pipe upto 110mm in any position with wall or in floor etc complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed.

S&F 75 mm PVC (SWR) bends any radius with acess door complete all as specified and directed.

S&F 110 mm PVC (SWR) bends any radius with acess door complete all as specified and directed.

S&F 75 mm PVC (SWR) branch piece single (single Y) equal or unequal with access door complete all as specified and directed.

S&F 110 mm PVC (SWR) branch piece single (single Y) equal or unequal.with access door complete all as specified and directed.

S&F 75 mm PVC (SWR) junction single (T single) equal or unequal.with access door complete all as specified and directed.

S&F 110 mm PVC (SWR) junction single (T single) equal or unequal with acess door complete all as specified and directed.

S & F in repair mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed in steel frame/wooden and fixed with stainless wire staples complete all as specified and directed.

M&L for 3 mm thick sheet glass ordinary quality and glazing withoil putty in square not exc 0.5 Sqm in each pane including hacking out complete all as specified and directed.

Description all as per item No 46 above but figured glass,pin head type complete all as specified and directed.

3Krishna Enterprises

Balaji Associates

SahaDevSingh Constructions

M/S RADHEY GOVIND ENTERPRISES

Abhi Construction

Mahendra Enterprises