NIT No GE/ND-89/2025-26

S&F in repair submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLSH type 1100V grade 2 x 4 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor multi stranded FRLSH type cable for continuous earth wire and duly connected to common earth dolly including PVC concealed conduit 20 mm dia medium grade ISI marked and its accessories including provn of new factory made pressed steel modular switch/terminal box of suitable size and new modular front & back plates of approved colour/model of suitable size for housing the modular switches, sockets all as specified and directed. Make : RR KABEL/Polycab/Havells

Demolition of Brickwork or stone/boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4. complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for Granite (of any type) work, 16-18 mm thick Z black machine cut,(table rubbed and polished) in bases for cooking platforms, lift wall, skirtings and window cills where ever required and fix on cement mortar bedding of 20mm thick in cement mortar 1:6 including pointing in white cement using marble dust with admixture of pigment to match same colour including rounded edges with shade of granite, incl drilling holes for pipes etc n exc 25mm dia in cooking platform hole in granite, complete all as specified and directed by Engr in charge. Notes: (a) Additional 75mm-100mm width patti shall be measured separately. (b) Minimum rate of granite should not be less than Rs. 1500/- per Sqm including GST.

M&L for 16-18 mm thick granite (of any type) Z black machine cut,(table rubbed and polished) as in vertical surfaces and like, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing laid over and including 15 mm thick rendering in CM 1:4 complete all as specified and directed by Engr in charge.

Dismantling floor, hearth or wall tiles including cement mortar bedding(but not backing), removing serviceable tiles from site complete all as specified and directed.

M&L for Non skid joint less coloured ceramic tiles 7-8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:4 (Size, Colour and pattern of tile as approved by EIC) complete all as specified and directed by Engr in charge. Make :- Somany or equivalent in Kajaria/Johnson etc.

M&L for joint free super gloss/high gloss coloured tiles in vertical surface of size 600mmx300mm 8-10mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over including rendering of 10 mm thick in CM 1:3 on wall including highlighter tiles of same size as required (Size,Colour and pattern approved by EIC) complete all as specified and directed. Make :- Somany or equivalent in Kajaria/Johnson etc

Demolition cement concrete (reinforced) in ground floors of any description and in any position as in kitchen slabs/shelves/old chimney etc complete all as specified and directed.

M&L for TMT bars 10mm dia and over cut to lengths bent to shape required including cranking bending and spirally hoping for columns hooking ends and binding with MS wire annealed n.less then 0.90mm dia complete all as specified and directed.

Taking down cement plaster on brick walls, raking out joints locking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15 mm thick rendering plaster on fair or other than faces of brick work or concrete surfaces in cement mortar 1:6 and finishing surfaces even and smooth without using extra cement complete all as specified and directed by Engr in charge.

M&L for Preparation of new plastered or un-plastered surface of walls and applying two coats of oil bound distemper using roller brush on walls over a coat of primer and over incl one coat of 1.50mm thick Birla putty complete all as specified and directed.

Supply only Styrene Butadiene Rubber latex emulsion complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of wall scrapping by machanical means and applying two coats of oil bound distemper using roller brush over a coat of primer and over incl one coat of Birla putty complete all as specified and directed by EIC.

S&F HDHMR Cup Board made of 18 mm thick with upto 1 mm thick Prelam of glossy/Matt finish (incl prelam make - Greenlam, Merino or equivalent of approved brand) for hold of shelf / partition/back /kitchen top shelf and shall provide 3 edges in sizes as per required length. the edges of shelf / partition / wall side to be lipped with 18 mm with upto 1 mm thick Prelam and HDHMR sheet of density 750 Kg /cbm manufactured by as ISO -9000 certified company, using solvent cement fixed with screws to timber frame work etc (including all necessary SS304 hardware fitting i.e fixing with soft closing hydraulic hinges, SS handles, ball catchers including locking arrangement in Cup board including dismantling of old sheet complete in all respect as specified and directed.Note- edge bending should be done (measurement should be taken external face only i.e. length and breadth and depth upto 0.45m and payment for hydraulic hinges done separately) complete all as specified and directed. Make: Rajshree,Century,Giza or equivalent of approved make

S&F stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make - Hettich/Haffele or equivalent in others to cupboard shutters of kitchen cabinets with full threaded steel screws including making necessary recess in board and finished etc complete as per direction of Engineer-in-charge complete all as specified and directed.

S&F Kitchen cabinets made out of HDHMR sheet board 18mm thick with upto 1 mm thick Prelam of glossy/Matt finish (incl prelam make - Greenlam,Merino or equivalent of approved brand) including making drawers, partitions, shelves and WPC board on all sides with following specifications and as directed by Engineer-in-charge:- (a) 18 mm thick HDHMR solid flush board with upto 1 mm thick pre-laminated sheet of glossy/Matt finish fixed on one side, as front face/shutter of kitchen cabinet and inner side of white colour of HDHMR sheet of density 750 Kg /cbm manufactured by as ISO -9000 certified company. (Make- Rajshree,Century, Giza or equivalent of approved make) (b) Frame of size 50mmx47mm. (c) Shutters having soft closing hydraulic hinges make - Hettich/Haffele and ss304 handle 75mm long 01 No for each shutter. (Note- only payment of hydraulic hinges shall be paid seperately in each nos) (d) Bottom, back and sides of cabinet covered with 18 mm thick hdhmr board with 1 mm thick pre-laminated of glossy/Matt finish sheet fixed on one side. (e) Drawers having ss304 handle 75mm long and two long sliding rails for each drawers with magnetic catcher as required. (f) Each Cabinet must have one drawers supported of sliding rails and having locking arrangement in one. (g) Size of each cabinet shall not be exceeding 0.9 M x 0.75 M and 0.60 M depth. (h) Measurement will be considered only for front face i.e. length & height & depth 0.60m. (j) SS304 jali baskets mounted on each drawer having ss telescopic channel incl all baskets i.e. pullout,wire,corner,plate,plain,bottle,cutlery basket of approved make(6 no of basket in one kitchen) (k) edge bending should be done . Note: Measurement for purpose of payment shall be made on external visible face for width x height (considering frame).

S&F in repair LED Tube Light of 16-20 Watt 230Volt (approx size 4 ft), box type complete with LED Tube Light 20 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size having min P.F >0.95, minimum efficacy-120 lumen/watt, IP 20 rating complete all as specified and directed. Make : Bajaj cat Part No BAJAJ BCLAB 20W CW LED XT, Crompton cat Part No CCS-100-20-65-HL2-OP-NWH, Phillips Cat Part No BN308C LED20S-6500 L120 PSU WH.

Surface excavation not exc 30cm deep and averaging 15cm deep and and getting out in hard or dence soil complete all as specified and directed.

Removing excavated material of hard /dense soil exc. 1.50 km but n exc. 5 km and depositing out side the MOD land complete all as specified and directed.

M&L for Hard core of broken stones or boulders of gauge not exe 63mm, deposited spread, levelled in layers n exc 15 cm thick incl watering and rolling with power roller 8 to 12 Ton complete all as specified and directed by Engr-in-charge.

M&L for cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in coping, band, bed plates and similar items including weathering slightly rounded or chamfered angles and througting, complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking coloured paver block with ceramic/glossy finish any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and directed By Engr-in-charge.

M&L for Sand for 50 mm thick filling under interlocking paver block including watering and consolidation complete all as specified and directed.

S&F MS works for fencing post and struts including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc conforming to Fe-290 Gde E-165 complete all as specified and directed.

Fixing only chain link MS galvanised fencing of any size with GI wire including line wires any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.

Supply only galvanised chain link fencing 3.40 mm dia & 100x100 mesh including line wires wt n. exc 4.00 Kg/Sqm complete all as specified and directed.

S&F mild steel screw bolt (machine made) with square or hexagonal head at one end, screwed other, fitted with washer and one hexagonal or square n exc 5cm long and 10mm dia

M&L for Mild Steel round bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for securing and supporting of of wiremesh confirming to Gd.I, IS-432 or Fe-290 (Gde-E-165) complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;door in fencing ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces, of steel and iron work of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide complete all as specified and directed.

S&F in repair ceiling rose 3 terminal / PVC insulated body ISI Marked complete all as specifie