Providing Highmast light Near Kal Mandapam to Alagar Kovil Main Road at Eranium Village and Panchayat.

Earth work excavation in all soils such as red earth ,hard stiff clay soil, stiff black cotton soil, hard redearth,shales, murrams, gravel,hard rock not requiring blasting ete complete.,SS 20 B

Supplying and filling in foundation, basement, etc with filling M.Sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Cement concrete 1:4:8 mix usin 40 mm HBGS metal inculding cost and coveyance of all materials to site including labour for mixing , laying,curing etc complete.,

Supplying and centering shuttering including necessary support for side walls and drains using steel sheets of size 90cmx60cm and 10 gauge stiffened welded with mild steel angles of size 25mmx25mmx3mm complying with standard specification as directed by

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

R.C.C. 1:1-1/2:3 (One Cement, One and a half crushed stone M.Sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M.Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

Supply and Delivery of 12.5m High Mast System with all accessories Mast Shaft fullyhot dip galvanized and should with stand wind velocity of 160 km per hour the mast should included head frame SS wire rope 6mm dia double drum winch galvanized lantern cerriage arrangement suitable to carry 12 nos of Luminaries with control gearbox and flxible multi core trai;ing cable a specified in the relevant IS Conditions with Built -in non flame proof power tool for simultaneious up ward and down ward movement of lantern carriage complete. including erection commissing of 12.5m High mast on the above said concrete foundation using suitable equipments and fixing of 200 w LED flood light luminaris in the lantern carriage including internal wiring using flxible copper cable complete.

Supply and delivery of 200 W LED (Flood light Type) Lamp Fittings made of pressure die cast aluminium housing with heat resistant toughened glass cover confirming to IP65. Separate compartment for LEDs & electronic driver with CCT of 5700K, PF > 0.9. System efficacy >85, Operating Volage Range120 -270 ~ Rated Power 200W Current (A) @240V 0.880, Wattage (W) @ 240V - 200W , Power Factor >0.9 Current Harmonics (THD) <10% Operating Conditions Operating Frequency 50Hz Operating Temperature Range -20°C to +50°C Colour Temperature Cool White (5700+_300K) Luminous Flux >22000 Lumens package not less 100 - 110 lm/W Life Span > 50,000 Hours Approx,waight in (KG) 12.65kg :. Body Alluminium Die casting Body Heat Sink Optimized thermal design to ensure maximum life.Protection of IP 65 Standards for Dust and Water including interconnection etc; complete as per Standard Specification.as directed by the departmental officer.

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements withnecessary masonry work and with 38mm RCC cover slab for the brick masonry